4 Port 3.5mm Stereo Audio Switcher: Bidirectional switching Splitter Audio Sharing active speakers and headphones | Method 1: Connect 4 audios to (IN/OUT)A/B/C/D, use the 4 channel switch knob to get an output; | Method 2: Connect an audio to IN/OUT, select an audio output between (IN/OUT)A/B/C/D; (The output can be switched between speakers and headphones) | 4 channel switch knobs, fully isolated independent circuit, make sure that each signal is not affected by the other three channels. | Plug and play; No External Power Required; Won't affect the sound quality! | Note: Does Not Support Microphone.

Actual Privacy Screen Filter dimensions are 17 inch measured diagonally. 13.31 inch width x 10.61 inch high. Compare your screen dimensions against our dimension before purchasing. | Blocks visibility from side angles greater than 30 degrees from center, but NOT behind you. | Anti Scratch, Anti Peeping, Easy Installation. | 2 installation options -- slide screen on and off or mount permanently. | Decrease surface reflection of lighting and external lighting.

BS-708 USB GPS Module support windows and linux system, not for android and IOS system | BS-708's chip is G7020-KT. The Receiving Format: GPS,QZSS and SBAS, and have 56 Searching Channel; Data Level: Default USB level; Data Protocol: USB, TTL or RS232, Default NMEA-0183 | You need to install the driver to use BS-708 USB GPS Module on Windows system, but it is plug and play on Linux system | This usb GPS receiver has a cable length of 2 meters, BS-708 USB GPS Module has 4M flash to save the configuration. So you don't need to reset the data when you use it next time | The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find "Sold by Geekstory" under Buy Now button), in the new page, click “Ask a question” to email us. | Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.

【Compatibility】Compatible with Uniden radar detectors:Uniden R1、R2、R3、R4、R6、R7 、 LRD300、LRD350、LRD400、LRD450、LRD500、LRD550、LRD600、LRD650、LRD700、LRD750、LRD800、LRD850、LRD900、LRD937、LRD950、LRD199 SW、LRD6499 SW、DFR1、DFR2、DFR3、DFR4、DFR5、DFR6、DFR7、DFR8、DFR9, Not applicable to other models of radar. | 【High quality materials】Say goodbye to plastic brackets that are prone to detachment when exposed to high temperatures. Our car mounted rearview mirror radar brackets are made of all aluminum alloy and undergo anodizing treatment to improve corrosion resistance and wear resistance. | 【Stability】 Use a hexagonal wrench to tighten the bolts to maintain the stability of the rearview mirror bracket. Even on rough roads, radar detectors can be fixed firmly and will not shake.please ensure that the length of the rearview mirror lever arm is greater than or equal to 0.4 inches. | 【Not obstructing sight】The rear-view mirror rod radar bracket can be freely adjusted to the ideal position, and the angle is flexible to avoid blocking the line of sight and ensure driving safety. | 【Multi functional】The bracket handle is equipped with a 1/4 threaded adapter interface, which can be extended to different devices. The accessory tool includes an additional short connection adapter, which can replace the best connection adapter for your own detector.

【VERTICAL & HORIZONTAL SHOOTING】This L Quick Release Plate help you switch from vertical to horizontal shooting quickly and designed for DJI Ronin RS2 RSC2 Zhiyun Weebill-S,also compatible with SLRs Tripod Monopod. | 【Comfortable Material】This L-shape QR plate is made of Premium aluminum to avoid unexpected damage and durable use.CNC treatment which combines strength and toughness, makes it waterproof and rustproof.Only weighs 113g and easy to storage. | 【Shooting Way Flexible】Adopt horizontal and vertical plate separable design,the vertical plate can change position on the three sides of horizontal plate according to your shooting need. | 【Precise Control】Marked with a scale on both horizontal and vertical plate,easier to adjust the camera position more quickly. | 【Extensive Compatibility】The QR plate comes with 1/4 inches camera screw , 1/4 inches expand screw and Non-slip mat on both horizontal and vertical plate.1/4 inches expand screw can be used for Lens Support,overall balance and more photography equipment.

Converts 2 analog composite input to HDMI 1080p (60HZ) output,displayed on 1080p (60HZ) HDTV/Moniter | Tiny size and easy to install,plug and play.Provide advanced signal processing with great precision,colors, resolutions, and details. | Support 4:3/16:9 switching. | 2AV to HDMI Converter Compatible with WII, N64,NGC,SNES, PS1, PS2, PS3, Xbox, STB, VHS, VCR DVD Players, TV and Projector, etc. | Please contact the seller's customer service , if you have any questions.

【Compatibility】Compatible with Escort IX IXc Max 3 Max360C/2020 Max 360 Redline EX Beltronics GT360 Cobra DualPro models with magnetic absorption radar (not applicable to unlisted models) | 【High quality materials】Say goodbye to plastic brackets that are prone to detachment when exposed to high temperatures. Our car mounted rearview mirror radar brackets are made of all aluminum alloy and undergo anodizing treatment to improve corrosion resistance and wear resistance. | 【Stability】 Use a hexagonal wrench to tighten the bolts to maintain the stability of the rearview mirror bracket. Even on rough roads, radar detectors can be fixed firmly and will not shake. | 【Not obstructing sight】The rear-view mirror rod radar bracket can be freely adjusted to the ideal position, and the angle is flexible to avoid blocking the line of sight and ensure driving safety. | 【Easy to install】Device can be completed within a few minutes, please ensure that the length of the rearview mirror lever arm is greater than or equal to 0.4 inches. The bracket handle is equipped with a 1/4 screw adapter interface, which can be extended to different devices.

Compatible only with Valentine V1 radar detectors and not applicable to unlisted models. | The rearview mirror radar mounting bracket is made of all aluminum alloy material, which will not shake during driving, is safe and stable, and no longer worries about falling off. | It does not affect the driver's line of sight and is a close partner of the Valentine V1 radar detector. | Please note that the bracket requires 0.5 inches of rod space to be installed on the rearview mirror (not compatible with short stem vehicles). | If you have any questions about our rearview mirror mounting base, please feel free to contact us and provide high-quality service until you are satisfied.

Secure Attach | Huge range of options | Strong and secure | Very adjustable

UHF:400-470MHz;VSWR:< 1.5.Gain:2.5dBi; Maximum Power Input-watts:150W. | 400-470Mhz NMO Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera UHF Mobile Radios. | The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. | This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation. | L-Bracket Hole Stainless Steel 3/4" NMO Hole Mount, L Bracket for HYS TCJ-N1 Coax NMO Mount Cable Mobile Antennas Car Truck Hood install. Stainless Steel L-bracket for Trunk Groove Or Side Mounting.

【Broad compatibility】Universal ipad cup holder mount for Car Truck, the adjustable side clamps extend from 5.5 in to 11.4 in fits all 4-13 inch Device, such as iPad Pro 12.9 11 10.5 10.2 9.7, iPad Air 4 3 2 1, iPad Mini 5 4 3 2 1, iPad 8 7 6 5 4 3 2 1, smartphones iPhone 13, 13 Pro, 13 Pro Max, iPhone SE, iPhone 12, 12 Pro, 12 Pro Max, iPhone 11, XS, XS Max, XR, X, 8 Plus, 8, 7, 7 Plus, 6 Plus, 6, Samsung Galaxy Tabs/ Galaxy Note/ Galaxy S Series and more cell phones or Tablet devices. | 【Expandable Cup Base】:Upgraded With a and expandable base (the base of this mobile Tablet & Smartphone Holder Mount has three extended ears) that can be easily tightened and loosened through rotation, fits most standard size Round shape car cup holders. Compatible with the cup holder diameter from 2.56'' to 4.06'' (6.5~10.3cm). The cup holder base has a non-slip soft silicone liner, Provides more effective grip while driving, No Shaking, No Vibrating, keeps your tablets safe and sound. | 【Adjustable Expandable Arm height】This mobile tablet phone mount for in-vehicle cup holders adapts an expandable Arm for height adjustment, Adjustable height from 8.7 inches to 11 inches. A joint arm for easy 270 degree adjustment and a flexible ball joint for a 360 degree rotation design can provide the best viewing angle. | 【Convenient operation】 This tablet PC cup holder phone mount for cars is very easy to assemble without tools and works well on both tablets and smartphones. The adjustment function allows you to easily lock the device and view it vertically or horizontally. | 【Perfect enjoyment and Warranty】: Have a bigger screen for GPS navigation and you can easy to enjoy off-road entertainment when taking a break on the road trip. All Koalsels products comes with 45 days money back and 18 months warranty and we would reply your any questions in 18 hours.

External Mini SAS HD SFF-8644  to SFF-8644 Cable, 3-Meter(9.8ft), Twinaxial 8-pair high-bandwidth, transmission rates Up to 12Gbps per channel, low-skew, Impedance = 100 Ohms, AWG28. | Fully compatible with the SAS 2.1 AND SAS 3.0 interface specifications. | Wide Applications: External cabling solution for connecting Mini-SAS to HD Mini-SAS devices. Widely used in DATA Center, Servers, Storage racks, RAID systems, External Storage Systems, SAS/SATA HBA interfaces, Direct-attached storage (DAS),Switches. | Premium External Mini SAS HD Cable with Solid connection and Excellent EMI performance. Easy to install, PLUG AND PALY, Hot pluggable. | After-sales service: Provides 24/7 Customer Service, 30 Days Free-returned, 1 Year Free Warranty and Lifetime Technology Support

【Multifunction Tablet Clamp Mount】This super tough spring designed tablet clamp base can clip the max thickness upto 6cm.It can not only be clampped to car sun visors, car dashboard, car rear seat etc.Use as a stand for navigation or listening to music, but also clampped to kitchen cupboard, dining room, bedroom, laptop Screen, table edge, bedside etc for online classes, video recording, video call, working, studying, watching movies and so on.It makes your life simple and comvenient. | 【Universal 2 IN 1 Broad Compatibility】This universal Clip holder tablet fit for all 4"-13" inch screen smartphones and tablets, such as new iPad Pro 9.7 / 10.5 / 11 / 12.9, iPad Air 2, Air 3, Air 4, iPad Mini 1/ 2 / 3 / 4 / 5, iPhone 13, 13 Pro, 13 Pro Max, iPhone SE, iPhone 12, 12 Pro, 12 Pro Max, iPhone 11, XS, XS Max, XR, X, 8 Plus, 8, 7, 7 Plus, 6 Plus, 6, Galaxy Tab/ Galaxy Note/ Galaxy S and more cell phones or devices with or without a case or sleeve. | 【Multi-angle Adjustable】The metal clamp base is designed with a metal ball head, which can be adjusted freely in a three-dimensional 360-degree manner, and the camera screw thread hole design provides a horizontal 360-degree rotation. According to the installation in different places and different angles are required, the three threaded interfaces on the back bracket can provide options to achieve multi-angle, multi-camera shooting. | 【All in One Tablet Cellphone Camera Mount】The clamp mount designed with a standard 1/4'' screw, that can suit most light cameras such as Canon, Nikon, Action cameras such as Gopro, Webcams, and ring lights. Upgraded bracket designed with 3 standard 1/4'' screw holes can not only support cellphones and tablets, but also allows for connecting more devices, such as tripods or other cameras with 1/4''-20 screw. it really integrate the tablet mount cellphone mount camera mount as one. | 【Sturdy & Secure】Whole stainless made clip base ensures its' sturdy, durable,rust-proof, anti-corrosive,non-slip,waterproof. There is a soft non-slip silicone sleeve on the contact surface with the object, which not only ensures a good grip, but also protects the contact surface such as the sun visor from being scratched.

【A Surprise that brings the camera back to life】Bring your Camera back to life with a new battery, if it is barely holding a charge. Camera battery pack compatible with Sony cameras ZV-E10, ILCE-a7SM2, a7S, a7RM2, a7R, a7M2, a7, a6500, a6400, a6300, a6100, a6000, a5100, a5000, a3500, a3000, QX1; NEX-7, NEX-6, NEX-5T, NEX-5R, NEX-5N, NEX-5, NEX-F3, NEX-C3, NEX-3; SLT-a55, a37, a35, a33; DSC-RX10M4, RX10M3, RX10M2, RX10 | 【Easy to Power up】NP-FW50 Li-ion Rechargeable Battery Compatible with Sony Digital Cameras. Common micro-USB and USB-C/type-C input, you can charge anytime, anywhere at the USB port or USB-C/type-C port of the car navigation, the computer, or the power bank gives you more options than a standard battery charger. And Charges 1, or 2 NP-FW50 batteries simultaneously. You can enjoy100% similar to the original batterypackage | 【Intelligent LED Display Charger】 NP-FW50 camera battery charger can charge 2 NP-FW50 batteries simultaneously from any USB power source and indicate the charging process, state of charge/remaining capacity on the LED display, preventing battery from overcharging. During the charging process, the cut-off current value and cut-off voltage value of the battery and the charger work to protect the battery from overcurrent, overvoltage and overheating | 【High Quality】Complete with an NP-FW50 Battery with 1100mAh (100% accurate capacity）storage capacity, a voltage of 7.4, and a new fully decoded chip that works just like the original.【What includes】 2 * NP-FW50 Batteries; 1 * NP-FW50 Dual Bay Battery Charger; 1 * Micro USB Cable | 【100% PHOTO OPPORTUNITIES】2 Packs NP-FW50 Replacement Batteries, a USB dual charger and a 59cm Micro USB cable; never miss every once-in-a-lifetime moment thanks to the extra power provided. With the 2-Pack of NP-FW50 Batteries designed compatible with Sony digital cameras,a dual LED charger and a Micro USB Cable, you have a complete backup solution

【A Surprise that brings the camera back to life】Bring your Camera back to life with a new battery, if it is barely holding a charge. Camera battery pack compatible with Nikon cameras COOLPIX P7800, COOLPIX P7700, COOLPIX P7100, COOLPIX P7000, D5600, D5500, D5300, D5200, D5100, D3500, D3400, D3300, D3200, D3100, Df | 【Easy to Power up】EN-EL14/EN-EL14a Li-ion Rechargeable Battery Compatible with Nikon Digital Cameras. Common micro-USB and USB-C/type-C input, you can charge anytime, anywhere at the USB port or USB-C/type-C port of the car navigation, the computer, or the power bank gives you more options than a standard battery charger. And Charges 1, or 2 EN-EL14 batteries simultaneously. You can enjoy100% similar to the original batterypackage | 【Intelligent LED Display Charger】EN-EL14/EN-EL14a camera battery charger can charge 2 EN-EL14/EN-EL14a batteries simultaneously from any USB power source and indicate the charging process, state of charge/remaining capacity on the LED display, preventing battery from overcharging. During the charging process, the cut-off current value and cut-off voltage value of the battery and the charger work to protect the battery from overcurrent, overvoltage and overheating | 【High Quality】Complete with an EN-EL14/EN-EL14a Battery with 1100mAh (100% accurate capacity）storage capacity, a voltage of 7.4, and a new fully decoded chip that works just like the original.【What includes】 2 *EN-EL14/EN-EL14a Batteries; 1 * EN-EL14/EN-EL14a Dual Bay Battery Charger; 1 * Micro USB Cable | 【100% PhOTO OPPORTUNITIES】2 Packs EN-EL14/EN-EL14a Replacement Batteries, a USB dual charger and a 59cm Micro USB cable; never miss every once-in-a-lifetime moment thanks to the extra power provided. With the 2-Pack of EN-EL14/EN-EL14a Batteries designed compatible with Nikon digital cameras,a dual LED charger and a Micro USB Cable, you have a complete backup solution

Compatibility: This filter cover set is designed for GoPro Hero 7 Hero 6 Hero 5 Black action camera especially which can be used directly on the camera's lens without removing the self lens mod. At the same time, each piece of filter from YALLSAME has passed strict quality inspection which has the properties of high strength and high light transmission. (Fit for Hero7 Hero6 Hero5 Black only. Not fit for Hero7 Silver and Hero7 White) | Neutral Density (ND) Filter: The ND filter can reduce the intensity of all wavelengths or colors of light equally which is suitable for standard day photographs to blur water or cloud motion, add motion blur to subjects, extended time exposures, etc. The package includes ND8, ND16, ND32 filters for different conditions on the standard days. | Dive Filter: Recording with the dive filter, the GoPro 7 6 5 Black action camera can output perfect photos when you are diving or snorkeling underwater. Equip with the light red filter for blue water or freshwater at the shallow depth of 2 to 25 feet and with magenta filter for freshwater lakes or reservoirs at depth of 2 to 25 feet | Circular-Polarizing (CPL) Filter: The CPL filter can reduce the glare from reflected surfaces, such as reflections from a coffee shop window, lake, or cloud. Help restore vibrant colors and details. | Package Includes: 1x ND8 filter, 1x ND16 filter, 1x ND32 filter, 1x CPL filter 1x Light Red filter, 1x Magenta filter, 6x Safety tether, 1x Cloth. (Tips: Loop the filter with the safety tether to the camera mount in case of loss. )

2-Ports SFF-8087 to SFF-8088 Adapter with Full PCI Slot Profile Mounting Bracket; External 8088 to internal 8087 adapter, will work both on the host and device side. | Supports External SFF-8088 26-pin Host Connectors. Supports Internal SFF-8087 36-pin Device Connectors | Supports up to 6Gb/s Mini SAS Data Transfer Rate | Supports SFF-8087 to SATA Device Octopus Cables, SFF-8087 to SAS Device Octopus Cables, SFF-8087 to SFF-8087 Mini SAS Device Cables | With Lowe Profile and Standard Profile bracket.

10GbE SFP+ to SFP+ 10GBASE-AOC Active Optical Cable SFP+ assembly, 20-meter. | Widely compatible with Cisco SFP-10G-AOC5M, Ubiquiti, Netgear, D-link, Supermicro, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, etc devices. (Coding as Cisco SFP-10-SR) | In 10Gtek's Signal Integrity Lab, we 100% passed TDR & VNA tested. Each AOC Cable is individually tested on switches before delivery. | Backed by 10Gtek 30 Days Free-returned, 1-Year Free Warranty and Lifetime Technology Support. 10Gtek offer more compatible options, if your brands not listed above, pls contact us.

Attach to 62mm lens to use 72mm filters and accessories | Durable Brass Alloy Frame that prevents jamming and binding | Knurled sides for easier grip | Anti-reflective treatment on the inside of the frame to minimise reflections | Matte Black Finish

Attach to 62mm lens to use 67mm filters and accessories | Durable Brass Alloy Frame that prevents jamming and binding | Knurled sides for easier grip | Anti-reflective treatment on the inside of the frame to minimise reflections | Matte Black Finish

Attach to 72mm lens to use 82mm filters and accessories | Durable Brass Alloy Frame that prevents jamming and binding | Knurled sides for easier grip | Anti-reflective treatment on the inside of the frame to minimise reflections | Matte Black Finish

【Plug and Play】Right out of the box this USB C to VGA adapter has no external software drivers required or power adapter needed. | 【Dual Monitors Setup simultaneously】HDMI and VGA port can work simultaneously, you can use USB C to HDMI and VGA at same time. ❗ Note: Under extend mode, you can only get two screen images, not three. | 【4K Resolution】this VGA to USBC-C adapter the HDMI port supports resolution up to 4k*2k@30HZ, 4 times clearer than 1080P, supports VGA resolution up to 1920X1200@60Hz, 9Gbps Bandwidth let you stream smoothing online gaming. | 【Port Compatible】This USB-C VGA multiport adapter can be used to connect a device to a USB-C-enabled monitor or display, Works with devices equipped with a USB-C or Thunderbolt 3 port. ❗ Note: Not all USB C device is compatible. | 【2 Years Warranty】Backed by an CableCreation 2-Years Limited Warranty and 24/7 online service support, please feel free to contact us for any questions or suggestions.

Ultracompact and universal: Fit most DSLR & mirrorless camera, video camera, cellphone, GoPro, DJI Osmo, audio recorders, tablets, laptops with a 3.5mm(1/8") TRS or 3.5mm(1/8") TRRS audio microphne port | No battery required: Runs on Plug-In power, no need to worry about any batteries on the mic | Cardioid polar pattern: Unlike most built-in camera microphones or Omnidirectional polar pattern Lavalier microphone picks up sound from all directions, this shotgun microphone utilizes a cardioid polar pattern to focus on sound in front of it while attenuating sound entering from the rear. It is good at filtering out background noise and isolating the voice of the speaker for recording, which means it does best at picking up audio when your subject is in front of you | Wide application: Essential Mic to improve the audio quality of your videos on YouTube, vlogging, interviews, family vacation trips, live music, podcasting, Facebook live, Run-and-gun Shoot, outdoor events, tutorials and more on-the-go applications | Packaging includes: 1x aluminum construction cardioid mic, 1x shock mount, 1x deadcat windscreen, 1x foam windscreen, 1x storage case, 1x 3.5mm TRS audio cable(for camera, video camera, GoPro, DJI, audio recorder), 1x 3.5mm TRRS audio cable(for select cell phone, tablet, laptop, please refer to the compatible information in the below description)

【2 in 1 Variable ND2-ND3 & 1/4 Black Diffusion Filter】The 2 in 1 camera lens effect filter offers dreamy soft effect and a range of light stopping power in a single filter that would otherwise require 5 separate neutral density filters and one black diffusion filter. This 2 in 1 variable ND2-32 & 1/4 black diffusion filter enables you to handle bright sunlight with ease when filming outdoors | 【1-5 Limited Stops of Light Reduction】Rotate the limited variable ND2-ND32 neutral density filter to realize 1 to 5 stops of light reduction to achieve balanced exposure across image, reduce shutter speed for long exposure shots, and apply wider aperture for shallower depth of filed. Recommended for filming on sunny days | 【Cinematic Look with 1/4 Black Diffusion Effect】The filter also comes with black diffusion 1/4 effect for dreamy hazier look by reducing highlights and lowering glare. It helps make skin look smoother in portrait photography | 【Multi NANO Coated with No Color Shift】The 2 in 1 variable ND2-ND32 & 1/4 Black diffusion filter is slim and lightweight while delivering sharp images without casting X cross shadows. The 30 layers of nano coatings on both sides of the filter make it water repellent, scratch resistant, oil proof and anti fingerprint. No color shift | 【52mm Camera Lens Filters】This 52mm effect lens filter can only fit 52mm camera lens. Please confirm the filter thread size marked on your camera lens barrel with the "Ф52" (diameter) symbol first. A filter case and a lens cleaning cloth are also included for filter care and safekeeping

COMPATIBILITY - Works with these popular Nikon cameras that use ENEL15 batteries: Nikon D500, D600, D610, D750, D780, D800, D800E, D810, D810A, D850, D7000, D7100, D7200, D7500, Z5, Z6, Z6II, Z7, Z7II, 1 V1 | BATTERY & CHARGER SPECS - Premium Grade-A cells rated at 7.0V, 2000mAh for longer run-time and battery life; Outputs 500mA; Batteries and charger work with Nikon original batteries and Nikon original charger | MULTIPLE CHARGING OPTIONS & OVERCHARGE PROTECTION - Recharge your batteries in a multitude of ways including your wall, car, or powerbank. Charger is protected with overcharge protection to increase safety | INCLUDES - 2 batteries, 1 wall charger, and a European plug adapter for the Nikon EN-EL15 so you always have the power you need | USA WARRANTY - All items include a 3-year manufacturer warranty from Wasabi Power and 100% US based customer support in Pomona, California

Attach to 72mm lens to use 77mm filters and accessories | Durable Brass Alloy Frame that prevents jamming and binding | Knurled sides for easier grip | Anti-reflective treatment on the inside of the frame to minimise reflections | Matte Black Finish

Attach to 77mm lens to use 82mm filters and accessories | Durable Brass Alloy Frame that prevents jamming and binding | Knurled sides for easier grip | Anti-reflective treatment on the inside of the frame to minimise reflections | Matte Black Finish

Made of Aviation Aluminum CNC precisely machined, hand-polished, anodized surface with non-slip rubber and 1/4" stainless steel screw and spring | Referring to the original structure design, added the features of finger position and quick release plate, the volume is about 82mm x 38.5mm x 30mm, net weight is about 100g | Replaces the original tripod mount base of Canon EF 100-400mm f / 4.5-5.6L IS II USM lens, bottom is quick release plate of Arca-Swiss standard interface, compatible with RRS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI / MARSACE ball head, suitable for IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-JZ60BK / IS-70BK / IS-JZ80BK, etc | Package includes:1 x Lens Tripod Mount Ring Base IS-THDZ(Note: The other items in the photos not listed here are for illustrating only, not included)

Attach to 67mm lens to use 77mm filters and accessories | Durable Brass Alloy Frame that prevents jamming and binding | Knurled sides for easier grip | Anti-reflective treatment on the inside of the frame to minimise reflections | Matte Black Finish

Firmoo Blue-light Blocking Lens - The light yellow tint lens effectively block harmful blue-light from computer, phone, iPad, etc, relieving visual fatigue. | MAGNIFICATION - These glasses are +2.50 magnification. Your reader magnification/power depends on how far you are from the screen you are viewing. For a laptop or desktop (19+ inches away) select a magnification 2/3 your normal reading power. (eg:Your normal power is +3.00, then choose +2.00 for this case) For a smartphone, tablet or a book about select your normal reading power. | PRODUCTS DIMENSION -Please check the size before your purchase. Frame material: TR90, Lens width:53mm , Frame width:131mm, Lens height:38mm, Bridge (DBL): 18mm, Temple length:142mm, Lenses: Non-Aspheric, Head size: Narrow | VINTAGE STYLISH FRAME- Fashion and Chic Cateye frame, avoid the enbarrassment of wearing reading glasses and give you more energy via looked samrt. | Package Include & Warranty: The package includes 1* Anti-bluelight glasses, 1*plastic case, 1*cleaning cloth. Unfit or wrong glasses can be exchanged or refunded within 90 days of receiving. Customers will enjoy A Life Time warranty, covering any possible defect in materials and workmanship

Compatible with Gopro 5 Gopro hero 6 Hero 7 Gopro 2018 Action Cameras. (Fully Compatible or Compatible with firmware v02.60, v02.51, v02.00, v01.57, v01.55, 1.60 and Future Updates) | Battery Type: Rechargeable Li-ion Battery; High Capacity:1600mAh; Volts:3.85V; 3-Channel USB Charger with Type C Port: Input: DC 5V / 2A (Max) ; Output: DC 600mAh X 3(Max) | Premium Grade A cell for longer battery life with no memory effect;Batmax Products are CE certified, tested by manufacturer to match OEM products. | Rapid 3-Slots LED USB Charger with Type C Port: Smart LED charger display charging status;Red means Charging; While charging fully, LED will be turned into green. It Can charge three batteries simultaneously and independently;batteries can be charged with the GoPro charger or in the camera and can be charged from any power source (USB, laptop, car/wall adapter, portable power bank); | Package includes 3Pcs high capacity gopro 5/6/7 replacement batteries + 3Slots USB Charger with Type C port + Battery Storage Cases and It is fully docoded battery that will show battery level on your camera. 30-Day Money-Back, Two Years Warranty

7.4V,2600mAh,Li-ion battery | Replacement OEM P/N : PMNN4065 PMNN4066 PMNN4066A PMNN4069 PMNN4069A PMNN4077 PMNN4077C PMNN4104 NNTN4077 NNTN4103 | Compatible Models:DP3400, DP3401, DP3600, DP3601, DGP4150, DGP4150+, DGP6150, DGP6150+, XiRP8200, XiRP8208, XiRP8260, XiRP8268, XPR4380, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR8300 | Package included：1*Li-ion battery + 1*belt clip | OEM without IMPRES function and memory effect

【Filter Dimensions】: Width: 12 3/16" (310 mm), Height: 6 7/8" (175 mm), Diagonal: 14" (355.6 mm) - SightPro Blackout Privacy Filter is engineered to be compatible with Lenovo, HP, Dell, Acer, Asus, Samsung, and other laptop brands. Please verify your screen's width and height measurements before ordering. It's not recommended to make your selection based solely on your screen's diagonal size. [Not optimized for touchscreens.] [Not compatible with MacBooks.] | 【Two Attachment Options】- Installs in minutes. Option 1 uses clear adhesive strips that securely attach to any screen. Option 2 uses slide mount tabs that easily stick to the display frame, allowing you to slide the filter on and off the screen as needed. | 【Superior Privacy and Reduce Glare】- Our advanced multi-layered film filter blacks out your screen when viewing from the side, while maintaining a crystal clear screen straight-on. It also protects your eyes from harmful glare, UV, and blue light. [Note: It does not block visibility directly behind you, regardless of the distance.] | 【Perfect for Travel and Open Workspaces】- Our computer screen privacy filter is the ideal solution for healthcare providers, mobile workers, commuters, students, and business travelers. Now you can stay compliant and safeguard sensitive corporate information while working in airplanes, subways, airports and public areas. | 【Package Contents】- Each package includes one privacy screen shield filter, two sets of clear adhesive strips, two sets of slide mount tabs, and a microfiber cleaning cloth. Buy with confidence - located in the US, Sight Pro specializes in providing best-in-class privacy solutions to individuals, small businesses, corporations, government, and educational institutions. Our privacy screens are Section 889 and TAA compliant.

Elegant Digital Alarm Clock with Full Range Dimmer: 4 Inches large LCD screen with eye easy catch orange number display, time and content are easy to read at a glance. 100%-0% completely adjustable display brightness for comfortable viewing. 12 or 24hr switch, Indoor temperature ( ℃ or ℉) Display. | Digital FM Radio ONLY with Sleep Timer: Easy tuning in FM radio channel with 0-15 level volume adjustable. Speaker is loud and clear. Benefit sleep timer function lets you fall sleep to the radio by preset the radio to play for a certain amount time (10-120 minutes optional). | USB Charging Port: Extra USB port allow you to charge your smartphone, ipad or other smart device without plug in wall, handy, conveniently and organized. | Adjustable Alarm Sound and Snooze: Wake up to buzzer or radio should your preference. Both alarm source volume can be adjusted to your comfortable level. (buzzer: 3 level, radio: 1-15 level). The alarm will begin sound faintly then increases to its max within 5 seconds. 8 minutes interval snooze can be repeated in one hour until turning off. | Main Powered with Battery Backup: Plug in any wall outlet to power the clock radio with the included DC adapter ( adapter wire length: 76 inch). 3* AAA battery (not included) backup needed for keep the clock working for a short time during electric power failures.

Filter Dimensions: Width: 11 15/16" (304 mm), Height: 7 1/2" (190 mm), Diagonal: 14.1" (358.14 mm) - SightPro Blackout Privacy Filter is engineered to be compatible with Lenovo, HP, Dell, Acer, Asus, Samsung, and other laptop brands. Please verify your screen's width and height measurements before ordering. It's not recommended to make your selection based solely on your screen's diagonal size. [Not optimized for touchscreens.] | Two Attachment Options - Installs in minutes. Option 1 uses clear adhesive strips that securely attach to any screen. Option 2 uses slide mount tabs that easily stick to the display frame, allowing you to slide the filter on and off the screen as needed. | Superior Privacy and Anti Glare - Our advanced multi-layered film filter blacks out your screen when viewing from the side, while maintaining a crystal clear screen straight-on. It also protects your eyes from harmful glare, UV, and blue light. [Note: It does not block visibility directly behind you, regardless of the distance.] | Perfect for Travel and Open Workspaces - Our computer screen privacy filter is the ideal solution for healthcare providers, mobile workers, commuters, students, and business travelers. Now you can stay compliant and safeguard sensitive corporate information while working in airplanes, subways, airports and public areas. | Package Contents - Each package includes one privacy screen shield filter, two sets of clear adhesive strips, two sets of slide mount tabs, and a microfiber cleaning cloth. Buy with confidence - located in the US, Sight Pro specializes in providing best-in-class privacy solutions to individuals, small businesses, corporations, government, and educational institutions. Our privacy screens are Section 889 and TAA compliant.

Can trigger cameras wireless or wired. Half press to focus, full press to take a photo | Wired mode: The receiver itself with the 3.3ft connecting cable can be used as a wired remote switch and powered by camera, no battery is required | Wireless mode: Both the transmitter & receiver need to be powered by their batteries | 16 channels available, one transmitter can fire multiple receivers at the same time | Max working distance 30 meters

CREATE DECORATIVE TAPE ACCENTS: P-touch Embellish White Print on Berry Pink Tape TZE-MQP35M is perfect for adding your own personal, decorative touch to gift-wrapping, party favors, home décor, scrapbooking, craft projects and more. | PERSONALIZED PRINTING: Easily customize the berry pink decorative tape with your own personalized message in easy-to-read white print to help make a lasting impression for all your crafts, gifts, events and occasions. | CRAFTING MADE EASY: Easily create memorable tape accents with included craft-focused label templates provide many decorative and whimsical designs. | USE WITH P-TOUCH EMBELLISH RIBBON & TAPE PRINTER: Use the P-touch Embellish and P-touch Embellish ELITE (each sold separately) with a collection of fonts, patterns, frames, symbols and emojis to create unique, personalized, decorative tapes. | GET CREATIVE WITH P-TOUCH EMBELLISH TAPES AND RIBBONS: P-touch Embellish decorative tapes, satin ribbons and washi tapes are available up to ~1/2” (12mm) wide in many fun, creative designs, vibrant colors and styles.

【Complete Camera Lens Filter Kit】 The 4-in-i magnetic camera lens filter kit includes a Neutral Density ND 1000 filter, a ultraviolet MCUV filter, a circular polarizing (CPL) filter, a Magnetic Adapter Ring, a water-resistant Filter Pouch to withstand drizzling rain or snow, and a handy Cleaning Cloth to remove dirt or grease on the filter surface. You can use the magnetic adapter ring with any filter, or just leave the adapter ring on the lens for use with the lens cap | 【Quick Magnetic Attachment】 Unlike traditional thread filters, the NEEWER Magnetic Lens Filter Kit allows you to change or install filters in less than a second, and even achieve easy stacking of filters for use. Suitable for outdoor travel photography, and capturing beautiful moments | 【42-layer Nano Coating & HD optical glass】Adopt imported AGC HD optical glass, 42-layer double-sided coating, no chromatic aberration (color shift), hydrophobicity, scratch resistance, and oil resistance. All-round protection of your lens from accidental damage | 【Ultra Slim Design】Aviation-grade aluminum alloy is precision CNC machined, making the filter durable and easy to install and remove from a 49mm lens. The 1.9mm-3.5mm ultra-thin frame ensures that the 16mm wide-angle focal length has no vignetting and vignetting. The slim filter prevents vignetting even if you use a wide-angle or telephoto lens | 【ND1000/CPL/UV Filter & Combination】The ND1000 (10 f-stops) filter helps shoot stunning mesmerizing long exposure. The MCUV filter reduces UV rays and eliminates blue casts in photos. CPL filters help reduces glare from a non-metallic surface and enhances color saturation & contrast. You can also use them in combination, such as magnetic adapter ring + CPL + ND1000+MCUV

Enhance Your Listening Experience: immerse yourself in the world of pure audio, unleashing a delightful auditory experience with our package that includes 2 sets of vinyl record cleaning arm; Each set comes equipped with a small brush, providing sufficient replacements to meet your maintenance needs; Dive headfirst into the exciting realm of fidelity audio accessories, crafted to elevate your listening journey | Innovative Carbon Fiber Brush: rejuvenate your vinyl records with our carbon fiber bristles, engineered to deliver anti static decoupling; This innovative design helps to put static build up at bay, ensuring clear, quality audio free from unwanted cracks and so on; Be it your treasured old vinyl or daily vinyl rotations, the record cleaner brush will help amplify the purity of your audio experience | Deep Cleaning Sensation: take cleaning to the next level with our record cleaning kit's carbon fiber vinyl record brushes that delicately penetrate the grooves for a nice deep clean; Say goodbye to stubborn dust or dirt hiding in your records; This easy to use cleaning brush is an ideal addition to your vinyl record accessories or vinyl record cleaning kit | Hands Free Cleaning: introducing a record cleaning brush that lets your favorite tunes play undisturbed during the cleaning process; Effortlessly attach the anti static brush to your turntable base, and experience hands free cleaning from the outer edge of the LP to the inner groove; All without affecting the tracking force or tonearm operation; Turn up the volume and relish your favorite music as the arm silently whisks away dust before it reaches the stylus | Overarching Protection: crafted from wider distributed, gentler carbon fiber bristles than typical plastic versions, our anti static brush for vinyl records prevents your vinyl records from potential damage; With a strong adhesive for secure attachment, our anti static brush arm reduces both record and stylus wear; By minimizing airborne dust and eliminating static, this vinyl record cleaning brush ensures the longevity of your cherished vinyl record collection

✅3-in-1 With Transmitter /Receiver /Bypass✅ -In TX mode, our Blutooth audio adapter can retrofit non-Bluetooth-devices such as PC/TV with Bluetooth and send audio stream to Bluetooth speakers/ headphones. In RX mode, the Bluetooth receiver is connected to wired stereo system and then supplied with music via smartphone. In bypass mode, our Bluetooth adapter will help you upgrade your old TV, you can enjoy TV/PC + headphones/ speakers by attaching optical/ 3.5mm AUX/ 3.5mm AUX to RCA cables. | 📢Suport 2 Devices Without Disturbing Others📢 -In TX mode, Ainostone Bluetooth transmitter receiver for TV can be paired and used simultaneously with two Bluetooth headphones or speakers, which allow you immerse yourself in music or movies with your partner at night without disturbing your kids or neighbors. If you adjust the volume, the volume of both devices is adjusted simultaneously. If you are hearing impaired, our Bluetooth 5.0 Audio Transmitter Receiver is also perfect matched. | 💖Long Range Thanks To External Antenna💖 -Ainostone Bluetooth Transmitter Receiver has a precision tuned antenna to ensure secure & stronger radio connection. You can pair the Bluetooth audio transmitter with headphone, and play music on mobilephone, go around the house without missing anything. The Bluetooth TV Adapter is equiped with an on/off button to avoid always unplug the plug. Note: No battery! The Bluetooth receiver must be connected via USB cable (included) to power source (excluded). | 🌞1.8-Inch LCD Display & Volume Control🌞 -Ainostone Bluetooth transmitter receiver offers you a transparent way to pair wireless devices. The LCD display clearly tells you what is happening and which devices are connected. You can connect with Bluetooth headphones, speakers, home stereo, mp3 player freely. Farewell to the blind link! You can adjust volume, switch devices, play/pause by using corresponding buttons/rotary knob. The adapter automatically re-pairs with recently connected device. | 🌟Wide Compatibility Through Optical/3.5mm Aux/RCA Cable🌟 -Ainostone Bluetooth 5.0 transmitter is easy to set up: ①Power on by type-C cable to power source. ②Select mode between TX/RX/Bypass. ③Connect to your devices. The low latency Bluetooth TV adapter comes with all possible cables to offer maximum connection flexibility with TV, PC, laptop, earbuds, computer, CD etc. If you connect the Bluetooth optical adapter to TV, please set PCM Audio on TV. Used for home audio, home gym, home theater.