An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR, high-quality antenna base, and 3 antenna masts to get you started right away without any further purchases! | Unmatched price & performance--redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the NESDR SM

Lens Hood for 70-200mm F4G Lens | Dedicated lens hoods, such as the HB-60, are designed to match the specific focal length of the lens for which it was designed | Designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens | Colour: Black

Premium software defined radio NESDR SMArt XTR in a beautiful silver brushed aluminum enclosure | A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector | Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi | SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6) | Proudly built by NooElec in the USA and Canada! Full 2-year product warranty.

77mm Magnetic Adapter & CPL Filter. Adapter accepts Conventional 77mm Lens Caps and can be left on your lens. | CPL 1 Stop Exposure Correction | Optical Glass. No Color Cast | Hardened, Easy Clean Top Coat Water, Oil, Dust, Fingerprint & Scratch Resistant | ICE Magco Magnetic Filters Are Fully Compatible and Interchangeable with Kase, Haida & Marumi Magnetic Filters. ►Swap Filters Super Fast. Up to 4 Magco Magnetic Filters can be Stacked. | Extremely Lightweight. Filter and adapter Weighs less than 1oz!. | Low Profile. Ideal for Wide Angle Lenses | ICE Magco Magnetic Filters Are Fully Compatible and Interchangeable and have the same Polarity as Kase, Haida, H-Y & Marumi Magnetic Filters. | Includes Storage Case.

Connector A: VHDCI (Very High Density Cable Interconnect) 0.8mm 68-Pin Male | Connector B: HPDB68 (Half Pitch D-Sub 68 Pin) Male | Gold Plated Contacts | Double-Shielded Wire | Lengths: 6 feet | UPC: 194732006987

Plug and Play Audio Mastery - The DS18 MBKR Universal Waterproof RCA Line Level Control puts the power of audio control right at your fingertips. It's a plug-and-play solution that allows you to remotely adjust the volume or levels on any head unit, giving you complete command over your sound system | Effortless Installation - With its simple "1 hole" mounting method, installation is a breeze. Attach it to your dashboard or any convenient location, and you'll have easy access to precise sound adjustments without the hassle of complex setup | All-Weather Performance - Don't let environmental conditions limit your audio experience. The MBKR features an IP65 waterproof rating, ensuring it delivers reliable performance even in wet and challenging environments like boats, jet skis, or ATVs. ** Not submergible ** | Customize Your Sound - Whether you want to fine-tune the bass for that extra thump or adjust audio levels in different zones of your vehicle, this line level control has got you covered. It's versatile and perfect for use as a subwoofer or zone level control, allowing you to tailor your audio to your preferences | Enhance Your Audio Experience - Elevate your audio experience with the DS18 MBKR Universal Waterproof RCA Line Level Control. Enjoy superior audio control, customization, and the convenience of remote adjustments to fine-tune your sound system exactly the way you want it

Includes 1x RTL-SDR Blog V3 R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle and 1x Multipurpose Dipole Antenna Kit | Several improvements over other brands including use of the R860 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminum shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set. | Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). (HF reception below 24 MHz in direct sampling mode with reduced performance). Please note RTL-SDR dongles are RX only. | Comes with our portable VHF/UHF dipole antenna kit. Great for beginners as it allows for terrestrial and satellite reception. Easy to mount outdoors and designed for portable and temporary outside usage. Please do not use outside during poor weather conditions. Not suitable for HF reception.

An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR, high-quality antenna base, and 3 antenna masts to get you started right away without any further purchases! | Unmatched price & performance--redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed <0.5PPM tolerance out-of-the-box. This is at least 4x more accurate than units advertised as containing 1PPM TCXOs, which have up to a +/- 2PPM initial offset | Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues--run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi! | Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software | Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!

Premium RTL-SDR bundle includes newly designed NESDR SMArt in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts. Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty | A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, RF-suitable voltage regulator, custom heatsink, 2 silicone pads and SMA female connector | Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi | SDR frequency capability approximately 25MHz-1700MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, available on Amazon (Product ID B009LQT3G6) | An 8pc SMA adapter set and carrying case is also available on Amazon (Product ID B073JT98RR)

【True NVMe Speed】Blazing fast 16G NVMe SSD speeds made possible with LINKUP SFF 8643 to SFF 8639 cables. Specifically designed to connect a high performance NVMe SSD to an onboard SFF-8643 Mini-SAS HD port or to a M.2 to U.2 Add-On card; a perfect solution when a PCIe slot is unavailable. | 【Quality Construction】85Ω impedance twinaxial SAS cables offer PCIe 4.0 (3.0 backward compatible) specifications for true M.2 NVMe and U.2 SSD (16G) speeds. Flexible braided heavy-duty cable with 18AWG wires and individual laneway shielding allow for the best versatile connections. | 【SATA Powered】Integrated SATA power connects U.2 PCIe 4.0 (3.0 backward compatible), 4-Lane connection to the computer power supply to power the NVMe SSD with 3.3V 12V. | 【Compatibility】Adapt an M.2 SSD with adapters such as Ableconn M.2 NVMe SSD to U.2 SSD Adapter. Compatible with U.2 Add-On card. Compatible with M.2 to U.2-Mini-SAS Add-In Card. Compatible with Accessory Hyper Kit Expansion Card M.2 to Mini SAS HD. | 【LINKUP Cares!】Backed by a LINKUP Limited 1-Year Warranty and complimentary premium online support. Available in 2ft, 3ft, 4ft, and 5ft lengths.

28mm( 35/50 frame) Optical Waist Level Viewfinder，Suitable for different focal length lenses. Its shoe feet can be adjusted left and right, and it is suitable for a variety of cameras with the shoe is out of line with the lens. | Suitable for a variety of digital and film cameras, as long as the camera has cold/hot shoe. | ABS plastic manufacturing, small ,beautiful, bright. | Only for framing,does not participate in focusing or metering. | The images and photos in the viewfinder are mirrored left and right.

Enjoy the compactness and stability of the Peak Design Travel Tripod with any 3rd party tripod head. | Uses universal ⅜ inch threading. | Installs quickly using 4mm hex-drive screw (hex wrench included). | Works only with Peak Design Carbon and Aluminum Travel Tripod models.

12X32 HIGH POWER BINOCULARS : Featuring a 20mm large eyepiece and 32mm objective lens, these 12x32 compact binoculars deliver a noticeably larger, brighter image than typical 12x25 models. Whether you’re scanning the horizon on a cruise ship, following fast-moving birds in flight, or watching soccer game from the stands, you'll see a fuller picture without missing details. | BAK4 PRISM BINOCULAR & CLEAR LOW LIGHT VISION : Built with premium BAK4 roof prisms and fully multi-coated lenses, these pocket small binoculars maximize light transmission for bright, true-to-life colors. At dawn, dusk, or in shaded forests, you’ll still enjoy sharp, high-contrast images-making wildlife watching, bird watching, sightseeing or outdoor concerts far more rewarding. | ULTRA-LIGHTWEIGHT & PORTABLE SMALL BINOCULARS : Weighing just 343g (12oz), this pocket-size binocular slips easily into your backpack or jacket pocket. Perfect for travel, hiking, or beach trips-comfortable to hold for long periods without hand fatigue, and small enough that you’ll never leave it behind on your adventures. | DURABLE WATERPROOF & FOG-RESISTANT DESIGN : With a rugged rubber armor coating and ergonomic grip, these waterproof binoculars provide secure handling in rain, humidity, or fog. Shock-resistant housing ensures long-lasting use during hiking, camping, hunting, boating, or cruise trips. | EYEGLASS-FRIENDLY COMFORT : Featuring twist-up eyecups and generous eye relief, these binoculars provide clear, strain-free viewing for both eyeglass wearers and non-glasses users. Lightweight yet powerful, they are easy enough to handle while delivering the optical precision adults expect. Whether spotting birds at dawn, watching whales from a cruise deck, or enjoying a camping trip, they offer professional performance in every setting and make an impressive holiday or birthday gift for nature lovers.

Binoculars 25X30.HD binoculars for adults high powered deliver 368ft/1000yds large field of view.Capable of delivering a clear image from more than 650 feet away.Perfect for bird watching,hiking and travel. | 360 Degrees Rotatable and Stable Tripod,Upgraded Phone Adapter.Fit for All Kinds of Smartphones, and quick alignment.Thicker and stronger leg tube and Non-slip rubber feet design enable you to find the perfect shot, thus take clearer and brighter pictures. Easily capture wonderful moments in the distance and share them with your friends. | Waterproof Binoculars.Non-slip rubber grip ensures a secure hold; IPX7 waterproof and fogproof is ideal for outdoors;Daily Waterproof fog-proof body with rubber coated finish, durable and portable outdoors, even suitable for hostile environments. | Binoculars with BAK4 prism.20mm BAK4 prism lens binoculars adopt fully multi-coated lense and phase-coated prism,which increase the light transmission of binoculars to 99.9%,makes the image more transparent,clearer and brighter. | Compact Binoculars,lightweight design.Our Rodcirant binoculars are lightweight.The foldable design and only 0.6lb lightweight make them can be folded into palm-size.

Small but powerful- Ring Small Solar Panel has the same upgraded solar technology as Solar Panel (2nd Generation) in a compact size. Panel dimensions: 6.9 in x 4.4 in x 0.5 in / 17.5 cm x 11.1 cm x 1.2 cm. | Works with Outdoor Cam Plus, Outdoor Cam (Stick Up Cam), Stick Up Cam Pro, Spotlight Cam Plus, and Spotlight Cam Pro using the built-in USB-C connector. | Includes USB-C to Barrel Plug Adapter for backwards compatibility with Ring Outdoor Cam (Stick Up Cam) (2nd and 3rd Generation) and Spotlight Cam Battery. | Adjustable arm for 360-degree rotation and 180-degree tilt. | 6.5 ft (2 m) cable length with built in cable management. | Ring recommends at least 3-4 hours of direct sunlight per day for best performance. | Small Solar Panel with USB-C Cable, Adjustable Mounting Base with Cable Management, USB-C to Barrel Plug Adapter, Mounting Screws & Anchors, Cable Clips, & User Guide included.

This adapter gives you the ability to use your irreplaceable prime lens and saves you the cost of purchasing new lenses. | Allows focus infinity. Diaphragm control of the lens is set manually. High quality and compact. | Made of Aluminum Alloy material. | Compatible with Lens B4 2/3"Canon Fujinon lens and Camera EOS Digital Single Lens Reflex Camera, like 5DIII 70D 700D 7DII etc. | Package including 1pc x Mount Adapter Ring B4-EOS.

AccuCORE scratch guard technology is 100x more scratch resistant than standard discs for ideal video protection | AccuCORE technology also repels stains, dust and fingerprints | Delivers archival reliability

10GBASE-BIDI Bidirectional SFP+ to single LC Optical transceiver module, Single Mode, Wave length: Up: TX1270nm/RX1330nm; Down: TX1330nm/RX1270nm, DDM, up to 20km over single LC. | Wide Compatibility - Compatible for Cisco SFP-10G-BX20D-I/SFP-10G-BX20U-I, Ubiquiti UniFi UACC-OM-SM-10G-S-2, Mikrotik and Other Open Switches. It is widely used in fiber, switches, routers, NIC,server or other fiber optic equipments with 10G SFP+ ports for plug and play, support fully hot-pluggable. | 100% Usable - In 10Gtek's Signal Integrity Lab, we 100% passed tested. Each transceiver is individually tested on switches before delivery. | Superior DDM Function - DDM allows you to monitor the critical information concerning the status of the transmitted and received signals of the transceivers in real-time to find out some potential problems. | Perfect After-sales Service - Backed by 10Gtek 30 Days Free-returned, 3-Year Free Warranty and Lifetime Technology Support. 10Gtek is a manufacturer of transceiver, customized service is available

★ UPGRADE COMBO KIT - The all-metal set of NVG helmet mount and extension arm mount specially launched according to the needs of buyers can meet the shooting needs of more heights and angles. | ★ FREE COMBINATION & RANDOM COLLOCATION - The set includes metal pole helmet mount of 18cm and 9cm, which you can freely combine according to your needs to get more shooting angles. | ★ ALL ALUMINUM ALLOY EXTENSION ARM KIT - 1 * NVG Mount+2 * aluminum alloy extension arms of different lengths（18cm/9cm）+3 * aluminum alloy screws+1 x aluminum alloy wrench (fix the screws at the connection) | ★ REDUCE WIND RESISTANCE - The alloy extension arm adopts the maximum cutout design, which greatly reduces the wind resistance and improves the stability of shooting. | ★ SOPHISTICATED DESIGN&EASY INSTALLATION - NVG's low-profile design minimizes camera shake and is stable and safe. Push-type fixing and disassembly can be completed with one hand.

【The Difference Between MCO-N-PA & MCO-N-A & MCO-N-B 】: The material of N-PA is Metal bayonet + Engineering plastics material ); And the material of MCO-N-A is Metal Bayonet and Body Plastic (the bayonets on both sides of the tube rings connecting the camera and the lens are made of metal) ; The material of MCO-N-B is that only the bayonet where the lens is connected is made of metal, and the rest are made of plastic. | 2. 【Macro /Magnification Function】 Pay less Transform common lens into macro lens to capture the high quality images of small objects, Give a higher magnification at a closer distance, enter the macro world, easy to Take Subtle Pictures. | 3.【Compatibility】 Work with Nikon AF AF-S DX FX SLR Cameras, including D5300, D5000, D3000, D3200, D5100, D5200, D3100, D7000, D7100, D4, D800, D800E, D600, D610, D40, D40x, D50, D60, D70, D80, D90, D100, D200, D300, D3, D3S, D700 | 4.【Flexibility】Tube Lengths: (1) 12mm.(2) 20mm.(3)36mm, use alone or combinations. Note! The focal length of lens should be greater than the length of the tube,to achieve your desired focusing result . | 5.【Auto Focus & Exposure compensation】Note: it needs appropriate ocusing distance(1-3cm) space to Auto Focus function. When use 3 tubes together, there is a little difficult to auto focus. Suggest use manual focus or Increase the lens focal lengths to avoid blurry. & Use all shooting modes of the camera, exposure compensation is required. recommend use the manual mode to change the shutter speed directly to control the exposure level.

Adjustable Clamp from 67mm to 82mm - SmallRig matte box 4409 featured a distinctive adjustable clamp design, range from 67 to 82 mm (2.6" to 3.2"), this matte box ensures extensive compatibility with a wide array of popular mirrorless and cinema lenses | Quick-release Design - This matte box showcases a three-point locking system, to swift assembly and disassembly by pressing the push rods on both sides of the clamp and a locking knob on top | No Vignetting - With its slim design, it accommodates circular and square filters seamlessly, ensuring no vignetting at focal lengths ≥16mm (for full-frame cameras and lenses), reducing glare effectively in challenging conditions. Additionally, you can meet your diverse filter needs for video and photo shoots by selecting from optional CPL, ND (ID: 4799), VND (ID: 4649), Black Diffusion Filter Kit (ID: 4650), and White Diffusion Filter Kit (ID: 4652). Not compatible with 4x4" slide-in filters | Note 1: If the external diameter of the mirrorless lens is greater than 88mm or the cinema lens diameter is greater than 85mm, this matte box cannot be installed | Note 2: A list of non-compatible micro and cinema lenses is detailed in the pictures, and instructions for using different filters are detailed in the manuals | Note 3: Before use, remove the UV filter from the front of the lens, and ensure that the top locking device is securely fastened, do not operate without the top knob securely locked

【Compatible Models】This M1 A2442 trackpad is compatible with MacBook Pro Retina 14" A2442 2021 year. | 【Install】Each trackpad replacement A2442 without flex cable is tested before shipping and working. | 【Check】Before purchasing, please carefully review the product description and pictures and check your computer year to make sure you are ordering the correct one. | 【Tips】This is not an easy job for someone who has no technical skills with disassembling or assembling laptop.So only purchase this item if you know how to install it. | 【Service】If you have any questions, please feel free to contact us and we will try our best to help you. Thank you very much!

【Compatible Camera】Compatible with Canon EOS R, RP, R3, R5, R6, R6 Mark II, R7, R8, R10, R50, R100 Cameras. | 【Compatible Lens】 Compatible with Canon EF/EF-S Series Lenses. | 【AF Function & Aperture Control】Fast auto-focusing speed; Actual aperture of the lens can be controlled directly from the camera side. Meanwhile, Datas of Shutter, aperture and ISO are displayed on camera. | 【IS Function】Inbuilt image stabilizer, effectively eliminating image ghosting and blurring, making focus more accurate and better helping users take high quality pictures. | 【Weather Sealing】Dust and water- resistant. | 【Construction】Full metal body, Detachable tripod base.

PCIE 5.0 X16 Riser Cable: Compliant with PCIE 5.0 design specification , and actual test speed (50-55GB/s) meets requirements (PCIE 5.0 X16 Theoretical speed = 64GB/s at max). Backward compatible with PCIE 4.0/3.0. | Dual-row Wire Design: This is a 4-layer PCB board. PCIE signals are on layers 1 and 4. The signals are not a through-hole process and are directly connected to the gold finger. The middle 2 layers of the PCB play the role of signal shielding to prevent crosstalk between signals and ensure PCIE 5.0 signal integrity. | Anti-Electromagnetic Interference (EMI), Ensuring PCIE 5.0 Signal Integrity: 1) Each differential signal pair is dual grounded + individually foil encapsulated to minimize EMI of the various signals. Each differential signal pair is made of 30 AWG silver-plated copper. | 2) PCIE X16 female ports have embedded metal tabs and are linked to the line ground to block external electromagnetic signal interference. 3) The ground wires are all linked together between the gold fingers, which also ensures the integrity of the signal. | 78W Power Supply Supported: The power cord is made of 30AGW Tin-plated copper wire, also double soldered, a total of 40PIN, of which 10PIN is 12V power supply, 6PIN is 3.3V power supply. This solution ensures the stability of the maximum 78W power supply. | Not Hot Swapping: When the system is running, you cannot move the Riser Cable, or unplug the GPU, which may cause system failure. Please be sure to confirm the power is off before physical operation. | To reach PCIE 5.0 X16 speed, the CPU, motherboard PCIE X16 slot and GPU/SSD should all support PCIE 5.0 X16 feature.

1 Poe port and 1 uplink port at 10/100/1000Mbps each | Up to 90W of power over ethernet | Surface or wall mount, can also be slotted side-by-side with multiple injectors | Built-in power supply for All-in-One design (uses standard included grounded AC cord) | 100% Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty

【Everyday cinematic】Kenko Black Mist PROTECTOR - Lens protection filter with a Black Mist diffusing effect. | 【1/4 of the Kenko Black Mist No.1 filter diffusing effect】While protecting the lens well, the slightly weaker Black Mist diffusion effect allows you to capture movie-like scenes on everyday. | Multi-coated glass to suppress ghosts and flares in the image. | Water & Oil Repellent Coating makes a daily filter maintainance easy. | Filter diameter: φ62mm / Made in Japan

Built in Infrared remote control function. | A firm, comfortable grip for vertical-position shooting with the Camera. Buttons and controls are conveniently placed and easy to reach for greater comfort. | Holds two Li-ion batteries or six AA Battery for extended shooting. | The rugged, but lightweight, body design has gasket-sealed controls to resist dust. | When using two batteries, the grip will automatically switch to the second battery if the first becomes depleted. Switching does not interrupt camera operation.

Important Note: It does not work with the newest cameras such as : HC-V800GK/808GK;HC-WXF1GK/WXF1MGK/VXF1GK/VXF11GK/VX1GK/VX11GK; | Compatible With: Panasonic VW-VBT190/380 and HC-V110 V130 V160 V180, HC-V201 V210 V250, HC-V380, HC-V510 V520 V550, HC-V710 V720 V750 V770, HC-VX870 HC-VX981 HC-W580 HC-W850 HC-WXF991 and More; Capacity:3900mAh; Voltage:3.6V;Premium Grade A cell for longer battery life with no memory effect. | Batmax Products are CE certified, tested by manufacturer to match OEM products. | Package includes 2Pcs high capacity VBT380/VBT190 Batteries + USB Dual Charger + USB Charging Cable | 30-Day Money-Back, Two Years Warranty, Any questions, please contact us

Waterproof protectve case is specially designed for Go pro hero 13 12 11 10 9 Action Camera, it is suitable for skiing, surfing, diving, swimming, selfie, mountain climbing, skydiving, etc | This waterproof case for Go pro hero 13 12 11 10 9 accessories waterproof down to 263 FT / (80 M) perfect for deep water diving | The lens for Go pro hero 13 12 11 10 9 waterproof case is made of toughened glass with high light transmittance. It can shoot clear and high-quality images on the surface and underwater | The Protective Housing for Go pro hero 13 12 11 10 9 accessories made of aluminum alloy, strong and sturdy. Without the housing I do not recommend rubbing the lens, especially in the ocean where the sea water and sand can scratch it | This diving protection case for go pro hero 13 12 11 10 9 easy to install, It's no need to remove cover lens before camera is put into the housing, this design protects your camera lens better

【Soft Highlight Flares, Lowered Contrast】This black diffusion 1/8 mist filter could soften facial skin's wrinkles, freckles, and pores, making it more delicate, plump, and gorgeous. The mist film effect can be better realized, showing the film effects dreamily. | 【28 Multi-Layer Coatings】Both sides of the glass with waterproof, scratch-resistant, and oil-proof coatings. Protecting the filter and lens from all around is durable. | 【Import Optical AGC Glass】The mist cinematic filter is made of Japanese AGC optical glass, double side multi coats to 79% transmittance, ensuring the image quality and no color cast. | 【Ultra Slim Frame】With aviation aluminum, the width of the frame measures only 3.3mm, ultra-slim frame with no dark corners on the wide-angle and telephoto lens. CNC-non slip design for efficiently removing and installing the filter. | 【Package Includes】1x black diffusion filter + 1x lens cap. Multi-functional lens cap can be set on the filter and also can directly screw on the lens.

TRIPLE DASH CAM: This 3 channel dash cam features with a 170 wide-angle front camera + 150°Cabin + 150° waterproof rear camera, reduce visual blind areas. The Screen made by IPS panel, It allows you to see a clear picture at any angle without any blurring. | G-SENSOR & PARKING MONITOR: The dash camera for cars built in G-sensor, which will activate emergency recording and lock the recorded videos when it detects sudden shakes or collisions while your car is stationary. | LOOP RECORDING: Dash cam loop recording function makes the newly recorded video will automatically overwrite the oldest video when when storage limit reached, the video can be recorded in 1, 3 minute intervals. The car camera is already equipped with a 32GB SD card, you do not need to buy this card additionally. | SUPERIOR WDR TECHNOLOGY & CLEARER NIGHT VISION : The interior facing car dash cam design with 4 infrared LED lights, which can accurately capture important footage clearly under low light conditions. The superior HDR technology allows the camera to perform optimally in any lighting situation by adjusting the exposure to create balanced images and footage. | EASY INSTALLATION AND OPERATION: Car dash camera is plug and play, very convenient. Simple to mount the 3 channel dash cameras on the windshield which makes for an overall straightforward installation process. Easy to understand display and friendly key settings make it easy for you to use.

2. Support OTA online upgrade, and the function can be expanded. Never Brick | 4. Fast firmware update | 1. High-speed reading and writing of game cards, the theoretical speed is more than 10 times faster than GBxcart. USB2.0 direct connection chip at , non-usb to serial port solution | 3. High appearance, ultra-thin design | 5. The programmer can be used as a single-chip microcomputer development version. If you are an electronic development enthusiast, then he is very suitable. The card slot has 29 io supports serial port, spi, i2c, pwm, network communication, etc. Onboard buttons, indicator lights, usb communication interface. Expand your imagination.

Voltage can be set foe 3.3V or 5V – Voltage labels on adapter. | 8ft. length allows flexible connections. | 5-pin terminal block RS232 serial connection for wired applications. | Supports 2,500Vrms Isolation for TTL / CMOS Signals (TXD, RXD, GND) | Easy Serial Port Expansion over USB Port

AIR FILTER: There Is No Cutting - What Is Within The Picture Is What Will Be Received. When Received, The Item Is Ready To Be Installed! | MODELS: This Air Filter Is Compatible With The Following Projector Model Numbers: NPPA803U, NP-PA803U, NPPA803U41ZL, NP-PA803U-41ZL, NPPA803UR, NP-PA803U-R, NPPA853W, NP-PA853W, NPPA853W41ZL, NP-PA853W-41ZL | INSTALLATION INSTRUCTIONS: This Part Does NOT Come With Installation Instructions As Such Instructions Are Within Your Devices User Manual! | WHAT YOU WILL RECEIVE: This Offering Is For ONE Air Filter. Don't See Your Model Number? Send A Message For Assistance In Purchasing The Correct Part!

DESIGN: Lightweight, bottom mount camera grip | COMPATIBILITY: Designed for Sony A9/A7III | FEATURES: Vertical shutter button for portrait photography, AE/AF lock button and zoom control | EXTENDED POWER: Takes up to 800 pictures | BATTERY: Uses 2 NP-FZ100 batteries (not included)

Allows you to customize your motorcycle | Made of beautiful shiny chrome designed to show off its classic curves and lines | Installs in minutes | Includes (2) Chrome Zombie Speaker Grills; Suggested for installation: Thoroughly clean the area of grease, oil, dirt or other debris to ensure proper adhesion | Compatible with Harley-Davidson models: '96-'13 Electra Glides (excludes '12-'13 FLHTCUSE), '06-'13 Street Glides (excludes '11-'12 FLHXSE) and '09-'13 Trikes

Kenko's magnetic filter "PRO1D+ INSTANT ACTION" Series that makes Instantly attach and detach. | UV L41 filter absorbs ultraviolet rays which often makes outdoor photographs hazy and indistinct. | Accomodates lens caps and hoods without issue. | Set pack. A magnetic filter and adapter ring are included. | Filter Size: 67mm / Made in Japan

Remove annoying propeller distortion from your videos. | Compatible with GoPro Hero5, Hero6, and Hero7 Black. | This kit includes two filters: one for standard light (ND8) and an additional one for bright light (ND16). | A soft pouch with dividers is included to protect your filters from scratches. | This item is also available in our Nflightcam Cockpit Video Kit for GoPro Hero5, Hero6, and Hero7 Black.

Compact, lightweight design | Plug and play | No drivers required | Maximum Resolution 1920 x 1080 at 50/60Hz