Easy to install; For FM Radio Stereo Reception; | Length: 85mm; Full Length:245mm; Impedance: 75 ohm; Net Weight: 20g; | Antenna Interface: 3.5mm Plug Connector; | Compatible with: Bose Wave Music System,Acoustic Wave Music System,Wave Radio II Stereo Receiver,Built-in FM Radio Bluetooth Speaker,Built-in FM Radio Mobile Cell Phone; | Package List: 2 x Antenna; (As the Picture Shown)

Material: Aluminum | Color: Black | Net Weight: 18.3g

Size:(3x2.3x1.1cm) Colour:(black) Package Quantity:(2pack) Material:Metal PVC, ABS Shell. Features：90 Degree Angle 5.5 mm x 2.1 mm male DC port to DC 5.5 x 2.1mm female port adapter Coupler | Connector A: DC 5.5x2.1mm Female Jack (Hole Diameter:5.5mm, Pin Diameter:2.1mm) Connector B: DC 5.5x2.1mm Male Plug,(Outside Diameter: 5.5 mm, Inside Diameter:2.1mm) | Power supply from 5 volt DC to 5.5 mm x 2.1mm DC port from DC 5.5 x 2.1mm female port, for small electronics and devices which Use a 5.5 mm DC barrel jack for a power cable | DC 5.5*2.1mm blue port adapter for HP, Sega laptop, Android tablet, CCTV security surveillance camera, MP3, MP4, led light, Router, Mini Fan, Cable Modem, Hub, photo player, SCM development, electronic dog, access control attendance, car charger. Etc | Note: Please make sure the DC output and tip size of ac adapter are accordant before you bid.

6 - Bottom Case Screws (Pentalobe P5) | Secure your bottom (case) with this screw set. | We may have a few loose screws, but you don't need to! | The short screws go in the middle front of the bottom case. The medium length screws go in the front corners and the long screws go in the rear corners | Compatible for MacBook Pro 13" A1708 A2159

6 - Bottom Case Screws (Pentalobe P5) - space grey included | Secure your bottom (case) with this screw set. | We may have a few loose screws, but you don't need to! | Two long screws for the rear corners and four short screws for the sides and front. | Compatible with MacBook Pro 15-inch ( Touch Bar ) model A1707 and A1990 with space gray color option.

Perfect for Raspberry Pi Camera Module 3: A protective case designed for Raspberry Pi camera modules, compatible with official raspberry pi camera module 3, and V1, V2 and other 25*24mm size camera boards. | Quality Build: The transparent case and base are made of rigid ABS plastic, which not only looks great, but also provides sturdy protection for your Raspberry Pi camera. | Hassle-free: Simply secure the camera board with the four screws included in the package, then snap the top cover to the base and you're ready to go. | Pocket Size and Lightweight: Overall size 1.57*1.37*0.58inch; Only about 9g easy to carry and store. | Easy to use: The housing also has a mounting hole compatible with any tripod with standard 1/4"-20 mounting screws. This allows the camera to be secured anywhere you want, and the back also has an opening for the camera cable so you can remove it without opening the case. Please refer to ASIN: B09TKYXZFG for a mini metal tripod.

Right Angle Design : 90 degree and 270 degree hdmi adapter can be selected to change the interface direction to avoid bending HDMI cables and relief the strain on HDMI ports. Our HDMI connector fits for wall-mounted devices, solving the embarrassment of limited spaces between wall and device.( protect the female device of your monitor, PC, laptop and more) | 8K HDMI Adapter: Togconn HDMI male to female adapter to connect devices at a resolution of up to 8K@ 60Hz and 4K@ 120Hz, backward compatible 2K and 1080P resolution. Our HDMI coupler supports ALLM(Auto Low Latency Mode) and VRR (Variable Refresh Rate), HDR, eARC, HDCP 2.3, Dynamic HDR, Dolby Vision, HD Dolby 7.1, Dolby Atmos and 3D video. | High-Quality Material : HDMI adapter Features the latest ABS material and premium aluminum shells, Gold Plated Connectors and tested for more than 10,000+ times.Provide the best signal transmission for a better viewing experience. | Wide Compatibility : Perfectly works with any laptop, desktop, DVD, HDTV, Monitor, DVD, PS5, PS4, Xbox, Apple TV, etc. Enjoy 8K immersive visual experience. Note: For 8K performance, your HDMI cables, devices or ports must support HDMI 2.1 functions. | What You Get : 2 pack high-quality 8K HDMI adapter and 24 months free replacement service. If you have any questions about our product, please feel free to contact with our reliable customer service, we will reply you within 24 hours.

【1-Feet Short USB C Cable】 1ft USB Type C Charger Cable Easy for charging your phone with a power bank. beat the tangle and always keep the clutter down.Ideal for Travel use. | 【USB C CABLE BROAD COMPATIBILITY】: Compatible with the new USB C devices such as Samsung Galaxy Note 8/S10/S9/S9+/S8/S8+,LG V30, LG G6 G5, LG V20,Apple Macbook 12"(2015), Pro(2016), OnePlus 5 3T 2, Google Nexus 6P/5X, Google Pixel/Pixel XL,Pixel C, New Nokia N1 tablet, Lumia 950, Lumia 950XL, ChromeBook Google Pixel, Asus Zen AiO, Lenovo Zuk Z1, HP Pavilion X2, ASUS ZenPad S 8.0,Huawei P10 Plus,Huawei Mate 9, GoPro Hero5 and other devices with USB C connector. | 【REVERSIBLE CONNECTOR】:Keeps up with the latest trend of USB interface. This user-friendly design allows you to plug into all your USB Type-C compatible devices without worrying about the orientation of the port. | 【Ultra-durable】：10X Stronger and Perfect: Encased with Triple-Braided Nylon fiber, which make it have excellent anti-twisting & Abrasion-proof property. This USB Type C Cable can withstand at least 10,000 cycles of 90 degree bend test. Ideal for your heavy daily use. | 【What You Get】: 2Pack 1ft USB C cables.

Package Content:The pack of 20 screws,plus a Phillips Screwdriver #0 included.The screwdriver tip is designed with the strong magnetism. | Screw Color:Silver Color | Screw Outer Diameter:2.5mm;Shank Length:4mm;The blue coating on the screw prevent them from loosening and backing out. | They are originally manufactured for Dell laptops.They are also fit for other laptops which use M2.5 x4 screws. | Notice: Regardless of manual or electric locking, it must be guided and slowly locked to avoid thread slippage.

This compact high quality wire style keycap puller is a musdt tool for any mechanical keyboard owner. | Wires on the puller can bend outward to fit onto mechanical(and other)keycaps. | The keycap puller holds up to 3 keys to speed uo key removal. | Compatible with most mechanical keyboards including Cherry MX,Alps,and topre switches | Body Dimensions : 141mm X 20mm X 7mm

System support:Windows/Android/Linux office device | Precise Responsivenes :1000DPI,Frame Rate up tp 3600fps. High Percision Optical Engine promised a sensitivity for precise tracking on a wide range of surfaces. | Wireless Mouse :RF2.4G wireless transmission distance of up to 10m | Easy operation : Plug and Play make all the operation more easier than others. | Package Contents: 1x Wireless Mouse, 1x Nano Receiver,Powered by two AAA battery (not included)

- 2nd M.2 2230 2280 SSD Bracket M2 Shield Caddy Compatible with DELL G15 5510 5511 5515 PXNWV X8MY9 | - Compatible Models: For DELL G15 5510 5511 5515. | - Compatible Part numbers: For PXNWV / X8MY9 | - You will receive: 1 x m.2 SSD caddy with screws .

Secure private space:Your best Security Defense against Webcam Hacking and Protects your privacy. | Ultra thin:Measuring only 0.03in thick,which will not interfere with closing laptop. | Strong adhesive:Stronger adhesive will offer you strong attachment to your device，and can be removed if needed. Moreover, it will sustain through the wear and tear and remain strongly adhesive. | Fits on most devices:Can be used to cover most webcams on Computers, laptops, and tablets. It does not interfere with the webcam usage or indicator lights.

Replace a torn or damaged flex cable that connects the trackpad to the logic board for MacBook Air 11" Mid 2013-Early 2015 with model A1465. | This IPD trackpad flex cable carries input from other upper case components as well, so a damaged trackpad cable may affect the functions of the keyboard and power button. | What's included: 1 -original new IPD trackpad flex cable | Compatible with MacBook Air 11" A1465 Mid 2013 to Early 2015: MacBookAir6,1 Mid 2013:(MD711LL/A,MD712LL/A),MacBookAir6,1 Early 2014: (MD711LL/B,MD712LL/B) or MacBookAir7,1 Early 2015: (MJVM2LL/A,MJVP2LL/A) | Identifying Numbers: APN: 923-0432 , PPN: 593-1603-A, 593-1603-B | Our trackpad cables are individually tested and guaranteed to function perfectly. | This item can be returned in its original condition for a full refund or replacement within 30 days of receipt.

【Perfect replacement】It is designed specifically for Go-tcha (only includes charging cable, not includes Go-tcha), which works perfectly with your Go-tcha; It is similar in quality to the original charging cable and is a good replacement. | 【Very durable】It is very durable and can maintain the best working condition after repeated insertions and removals. The wire is wrapped in silicone. | 【Safe and reliable】It has a built-in premium cable, and each charger cable was inspected carefully. When the battery reaches 90%, the charging mode will be changed to better protect the Go-tcha. Charge with a wall charger will protect the device safety. | 【IMPORTANT】Do not charge with USB3.0, output higher than 1A may damage the device. ONLY FOR NORMAL (mostly) GO-TCHA, NOT FOR BIGGER (rarely) Go-tcha. | 【100% satisfaction guarantee】If you have any questions or are not satisfied with the product, please contact us first. We will send you a new replacement if the charger has quality problems, your satisfaction is our greatest concern.

1) Compatible model: MacBook Retina A1708, 13-inch model, Late 2016 - Mid 2017 | 2) Compatible For: Macbook Pro Retina 13-inch A2159 MUHN2LL/A*,BTO/CTO 2020 Year,A2289 MXK62LL/A*,BTO/CTO 2020 Year,A2338 M1 MYDA2LL/A 2020 Year | 3) Package includes: Screws x 6 (2 long + 2 medium + 2 short); 4 Pack Rubber Case Feetand Pentalobe Screwdriver x1 | 4) High-quality screwdriver: Made of S2 steel materials | 5) Remark: NOT compatible with A1706 (with touch bar model)

1) Suitable for Apple macbook air 11" / 13" (2011, 2013, 2014,2015) | 2) Package includes: 10 * bottom screws, 4 * bottom out foot, 1 * screwdriver | 3) Compatible model: MacBook Air A1369 A1370 A1466 A1465 all models | 4) Macbook Air Display Bottom Case Rubber Feet Replacement Set A1369 A1370 A1466 A1465 11" 13" | 5) This kind of rubber feet are fit for macbook Air mac 11 mac 13 AA1370 A1369 A1465 A1466 ONLY ,not for Pro Retina (A1425 A1502 A1398),ONES( A1370 A1369 A1465 A1466 ) PRO ONES(A1278 A1286 A1297)

【Protect Personal Privacy】Our laptop camera cover slide can efficiently protect personal and family online privacy secure against unwanted hacking attacks. What's more, the small cover also protects your front camera from dirt and dust and be a wonderful web cam cover sliders for your family. Just use one simple finger to move the slider easily, open or close your privacy webcam any time, just a laptop accessories can protect yourself whole day. | 【Super Slim And Durable】The camera cover is made of premium high-strength ABS Plastic that could provide long-term reliable protection for your privacy. And the compact size laptop camera cover is only 0.028 inches in thickness which will not interfere with the closing lid of your laptop. Protect your privacy all the time without affecting your daily use of the device. | 【Fits On Most Devices】The camera blocker for laptop perfectly compatible with most models of computers, tablets, and cell phones. Like MacBook Pro, MacBook Air, Mac, laptops, Microsoft Surface, iPad, Android tablet, PC, computer, all-in-one desktop, iPhone and other Android smartphones. The phone camera cover does not interfere with webcam usage or web signal and will not damage your device in any way. | 【Easy to Install and Use】The laptop webcam cover is super easy to install. You only need to stick it on the camera and press it for 15 seconds to install successfully. The 0.023 inches ultra-thin design, there is almost no gap when the tablet is closed. Camera privacy cover can be opened or closed with just one simple finger movement, when the camera is not in use just cover it to provide you with privacy security. | 【Upgrade Firmly Sticking】We adopt upgraded high-efficiency strong adhesive sticks firmly, so the camera cover slide will not come off easily. But it is also easy to apply or remove on your device without leaving any marks.

BNC Male to PL259 Female 2-Pack Included. | Application for Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi Radios External Antenna CCTV, LMR, etc | Body made of brass copper, nickel plated with gold plated center pin. Impedance :50 ohm. | Attenuates signal less than 0.1db. VSWR< 1.15(DC-1G). low signal loss every time. | Life time Warranty

O ring specification: approx. 8 mm/ 0.3 inch outer diameter, approx. 5 mm/ 0.2 inch in inner diameter and 1.5 mm/ 0.06 inch in thickness | Flexible and durable: made of silicone material with good elasticity, tough enough and not easy to crack, can serve you a long time | Easy to store: these small rubber ring gaskets are packed in a clear plastic box, which measures 7.4 x 5 x 2 cm(LWH), good for organization and portable, no more mess | Wide application: little o rings mostly are applied on the bottom of keyboard keys to reduce noise and give the keys a pleasant soft bottom out, also good as sealing rings for oil, dust, water and more | Quantity: 200 pieces of rubber rings and 1 storage box; Note: do not put in mouth

【Compatibility】 We offer 2 pack screen protectors with tempered glass film. Compatible with iPad 10th Generation 10.9 inch. (Model A2696 / A2757 / A2777)2022 Released.The screen protector provides shockproof protection for the entire touch-screen surface of your tablet's display. | 【High Transparency】 9H hardness surface and super HD high transparency maintains the original viewing experience,more intuitive and clear. Oleophobic coating on the surface effectively provents the smudges and fingerprints, providing a clean and clear screen environment. | 【Scratch-resistant & Shock-resistant】 This 9H Hardness screen protector with special tempered processing, strengthening the surface of the screen protector, makes it more effectively withstand the external scratch and impact force, reducing damage the screen. | 【Touchscreen Sensitivity】 The screen protector with ultra thin (0.33mm thickness), True touch sensitivity; Rounded edge integration. Maintain the original response sensitivity, which ensures quick and accurate typing, smooth games and video playing. | 【Easy Installation & Enjoy Time】 Just remove dust and aligning it properly before actual installation,advanced silicone adhesive, no residue when removing no worrying about bubbles, enjoy your time whether when with kids or outdoor when using tablet meanwhile protect your tablet from drop-off damage.

Cut Down UV Rays | Screw On | Optical Glass

Material: PP plastic | Color: Clear transparent | For carrying SD, Micro SD or T-Flash memory card | Lightweight and easy to store cases. | Listing for plastic SD/MicroSD Cases only, NOT including memory cards

24-Pin ATX/EPS Power Supply Start Up Jumper Bridge Tool is compatible with 20/24 pin connector. | Test starter allows the PSU to be powered on without being plugged into a motherboard. | 24-Pin Bridging Connector Plug can run and start up any ATX/EPS power supply by its self. | The jumper is using 1007 18AWG cable for reliability in long use. | Often used in assembling/testing PC water cooling systems, BTC Miners, testing lights, fans, hard drives or the power supply itself etc.

【Package Quantity】-Hex Head Screw Standoffs*3、Flat Head Screws*3、Transparent Screw Washers*3、Magnetic Screwdriver*1. （See picture 2 for screw size） | 【APPLICATION】- Compatible with ASUS Motherboard M.2 SSD NGFF/NVMe Screws Set ,does not fit MSI & Gigabyte. | 【MAGNETIC SCREWDRIVER】-Since M2 screws are too small, we provide you with a magnetic screwdriver to help you install quickly. Screwdriver bits make it perfect to hold and handle tiny screws in case of missing or dropping, magnetized tips. | 【DURABLE CONSTRUCTION]】-The precision screwdriver bits are made of good S2 steel, specially hardened with heat treatment which is more precise and durable than silver colored CRV bits,high quality for long time use. Ergonomic design. | 【SMALL M2 SCREWS】-We all know that the half-moon at the end of the drive for M2 SSDs contains an M2 screw,M.2 is a standard so if your motherboard has an m.2 slot it will apply m.2 screws.

Car radio antenna can help you improve the quality and enhance the stability of signal, and it can get 3 dBi Gain signal so that you can enjoy radio or music during travelling. | The core made of bronze wire and the shell made of ABS, durable, with self-adhesive tape, SMA antenna can be sticked firmly, don’t worry whether it will fall off from the vehicle. | Frequency Range: VHF 824~960 MHz, UHF 1710~1990 MHz; Bandwidth: V136/U290 MHz; Input Impendence: 50 Ω; Max Input Power: 50 W. | Car Windshield Window Glass Adhesive Mounting; Cable Length: 3m/10 feet; Antenna Connector: DIN Plug Connector. | Works with most car stereo receiver media head unit, marine boat radio stereo receiver.

【COMPATIBILITY】: A male to Mini B cord is compatible with HERO HD, HERO 3+,Son-y Playstation-3 controller, MP3 players, Digital Camera, Gar-min GPS Receiver, Zoom Mic, Dash Cam,Ti-84 and other devices with Mini B 5 Pin interface. | 【Convenient】: You can connect with the power adapter, car adapter, power bank, laptop and so on, those charging method can provide high efficiency and high stability charging experience for you. | 【Premium】: The flexible, powerful and durable material makes tensile force increased by 100%. Special Strain Relief design, can bear 10000+ bending test. | 【Data Transfer】:The cable supports the speed at up to 480 Mbps for data transfer which is backward compliant with full-speed USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps) and provides 2A power charging for devices with mini port. | 【Customer satisfaction】: Quality Insured and Within 24 hours customer service respond with hassle free return or exchange, please contact us if you have any questions.

MaxLLTo Brand New,High Speed USB 2.0 Data Cable Lead | This cable connects your digital camera to USB-ready computer, USB hub or photo printer/dock for pictures transferring. | Length & weight: 5.0 feet, light and easy to carry. | Replacement UC-E6 / UC-E16 / UC-E17 / UC-E23 For Nikon Digital Cameras below models | Compatible with : Nikon Coolpix Nikon Coolpix L26, L28, B500,L110 L120, L310, L330, L340, L620, L810, L820, L830, L840, A10, D5500, D5200, D7200, D7100, D750, S4100, S4150, S4200, S5100, S5200, S6000, S6150, S6200, S6300, S6400, S6500, S6600, S6800 digital camera

[Compatibility]: The AirTags case designed and Cut, especially compatible with Apple AirTag 2021, Released perfect fit. The airtags case 2 packs are 2 different color combinations compatible with the Apple AirTag keychain to make your life more colorful. | [Shockproof Silicone Materia]: The AirTag cover bumper compatible with your delicate AirTag. The airtag key ring is made of waterproof silicone material, which could provide a stronger buffer when bumps or drops to fully protect your Air Tags. | [Anti-lost with Keychain Design]: This Air Tag case comes with a fashionable metal carabiner is offered, so that you can easily hang the air tags everywhere, you can attach air tag collar holder to a dog /cat pet collar, your car keyring, your bag, Child's schoolbag, the valuables, and more. | [Easy Installation]: The exposed hole design is very conducive to signal transmission and humanized installation. Just put your label in the silicone sleeve. A precise cut-out shows the original logo of the brand. | [Best Gifts]: Spoil Your Loved Ones With A Great Gift: Brighten your wife's, girlfriend's, husband's, boyfriend's, or kid's day with a premium silicone AirTags holder keychain. package includes airtag holder keychain 2 pack.(NOTE:Airtag are not included)

Universal Adjustable Hand Wrist Strap | Black and Red,2pcs for each color | Total length: 20cm (7.87inch) | Adjustable, easy to adjust to the appropriate length | Fit for Nintendo Wii remote controller, cell phone, MP3 player, digital camera, usb flash thumb drive, keychain, badge holder, name tag and other portable items

☀️Compatibility：This silicone skin cover was specially designed for Apple AirTag. Protect your AirTag from shocks and scratches. (The AirTag not included) | ☀️Shockproof Silicone Materia: The AirTag holder is made of waterproof silicone material, which could provide a stronger buffer when bumps or drops to fully protect your AirTag. | ☀️Anti-lost with Keychain Design: This AirTag holder comes with a stylish metal carabiner is offered, so that you can easily hang the airtags everywhere. you can attach an AirTag case holder to a dog/cat pet collar, car keyring, bag, schoolbag, the valuables, and more. | ☀️Easy Installation: The exposed hole design is very conducive to signal transmission and humanized installation. Just put your label in the silicone sleeve. Sophisticated design and precise production processes will make your Airtag look more elegant. | ☀️What you will get: we provide 2 high quality silicone Airtag holders.If you find any issue with the Airtag holder , please contact us through message, we promise you a replacement or a full refund within 24 hours.

Set of 6 Pieces Narrow Spaces cleaning brushes, to meet various cleaning circumstance; | Quality Materials: made of high density polyethylene and durable nylon bristles; | Multifunctional usages, a helpful tool to clean the hard-to-reach spaces of keyboards, computer, PC vent, printer, car detailing, etc.; | The small cleaning brushes are also good to clean the dust and dirt from the tracks of sliding door, sliding window, window blinds and so on; | Quality made, easily to clean, just flush under tap water for seconds.

Compatible with Amazon Fire TV Stick, All Kindle Fire Tablets, Compatible with Samsung S7 S6 Edge J8 J7 | 1 x Charger Block + 1 x Micro USB Charging Data Cord(3.3 Feet) + 1 x USB-C Convertor Adapter | High Quality easily Charging and Data Transferring Sync Cable | Perfect Length: The usb cable with perfect length 3.3ft, neither too long nor too short for your devices everywhere and daily life | MONEY BACK GUARANTEE - Our Company Wants your Repeat Business so, if You Do Not Like our Product or Don't Want It For Any Reason, We Will Happily Accept The Return and Give You Your Money Back. No Questions Asked. 30 Days Money Back Guarantee - 24 Months - Exchange

This Body Cap and Rear Lens Cap Kit compatible with Sony E mount camera bodies and lenses. | A body cap protects the camera's sensor and interior from dust and damage when a lens is not in place. | The rear lens cap protects the rear glass element and electronic contacts from scratches, dust, water, and fingerprints.

Made of hard plastic | Easy and quick to remove | Protects lens from dust, debris, and bumps | Fits snug and tight on lens | Sides-Squeeze Snap-On Style

Haoge 39mm Center-Pinch Snap-On Front Lens Cap with Cap Keeper. | The center-pinch snap-on front lens cap with a squeeze, spring, and snap-on mechanism is easy to put on and take off. | The cap keeper prevents the loss of lens caps. With the lens cap removed from the lens while shooting, it hangs out of the way but secure and within reach for easy retrieval. | Compatible with Lenses: 39mm Filter Thread Lenses of Canon, Nikon, Sony, Minolta, Pentax, Olympus, Panasonic, Leica, Zeiss, Contax… | Please verify your camera's lens thread size before ordering.

Specifically designed for iPad Mini 5 (5th Generation, 2019, A2133, A2124, A2126, A2125), and iPad Mini 4 (A1538, A1550) (not compatible with ANY earlier version of iPad Mini) | Ultra-clear with 99.9% transparency to allow an optimal, natural viewing experience. | Highly durable, and scratch resistant - surface hardness 9H and topped with oleophobic coating to reduce fingerprints. | .33mm thickness is reliable and resilient, and promises full compatibility with touchscreen sensitivity | Includes: 1x Glass Screen Protector, Micro-Fiber Cleaning Cloth, Plastic Squeeze Card and Installation and Use Guide

Made of hard plastic. | Easy and quick to remove. | Helps lens resist dust, debris, and bumps. | Fits snug and tight on lens, attached to an elastic band. | ❤️❤️Please confirm your purchase is from the merchant “CamDesign” as our production of lens caps are sustainable. We do not give any sales rights to third party sellers. Third-party sellers selling under our products’ listings may be counterfeit goods and are not guaranteed of quality assurance.

Haoge 52mm Center-Pinch Snap-On Front Lens Cap with Cap Keeper. | The center-pinch snap-on front lens cap with a squeeze, spring, and snap-on mechanism is easy to put on and take off. | The cap keeper prevents the loss of lens caps. With the lens cap removed from the lens while shooting, it hangs out of the way but secure and within reach for easy retrieval. | Compatible with Lenses: 52mm Filter Thread Lenses of Canon, Nikon, Sony, Minolta, Pentax, Olympus, Panasonic, Leica, Zeiss, Contax… | Please verify your camera's lens thread size before ordering.

Made from the high quality Japanese PET film for easy installation and no residue when removed | High definition transparency film that ensures maximum resolution | Real touch sensitivity for a natural feel that provides flawless touch screen accuracy | Protects your screen from daily scratches, dust and scrapes | Include 3 pcs screen protectors