【FORMFITTING FULL CAGE】SMALLRIG ZV1 Cage 2938 is exclusively designed for Sony ZV1 Camera. As a formfitting full cage, it is designed to provide protection, accessory mounts and a comfort grip for your ZV1 camera. The camera mounts onto the cage via a front lens ring clamp that securely holds the camera. | 【BUTTON ACCESSIBLE】SmallRig cage 2938 DOES NOT block the access to your camera's functions, displays, ports, or battery when attaching a handle or tripod. You can attach the tripod to the right side of the cage to shoot vertically for TikTok. | 【COMFORTABLE SHOOTING】On the front of the cage features anti-slip silicone gel coverings to provide a comfortable handheld shooting. Optional Cable Clamp 1693 is provided and allows protecting the HDMI cable. (Note: When using the cable clamp 1693, please clamp the HDMI cable & rubber cover together.) | 【MULTIPLE MOUNTING POINTS】The cage features multiple 1/4"-20 threaded holes on top for extra Cold Shoe Mount 2044 and Mini Top Handle 2821. The bottom of the cage is not only features a shoe mount on the bottom for a light or microphone, but also features multiple 1/4"-20 threads allow the battery and card changes without unscrewing a shooting handle or a tripod. | 【SWEET DESIGN】The ZV1 cage features rubber pads on the bottom to protect your camera body and prevent scratching. Additionally, the cage provides a strap slot on each side for carrying straps. Also, an Allen wrench is included to enable you to tighten and loosen the screws quickly.

【For Canon C70】The handheld kit 3899 includes a top handle, a cable clamp for HDMI and a half cage includes a top plate, a side plate, a baseplate (with a extended baseplate). Designed for providing accessory mounting points and a comfortable handheld shooting experience | 【Multiple Mounting Options】The handheld kit comes with multiple mounting points: the 1/4" threaded holes able to mount Magic Arm (SmallRig 2115 / 2071); 3/8" locating holes for ARRI and NATO rail able to mount Monitor Mount (SmallRig 2903 / 2905 / 3601); and built-in cold shoes able to mount microphone (SmallRig 3468) and LED light (SmallRig 3861) | 【Full Access to Camera】Maintains full access to original camera buttons. The top plate compatible with the original handle kit and microphone holder. In addition, the cable clamp for HDMI can prevent accidental disconnection and ensure stable signal transmission | 【Multi-scene Shooting】After removing the extended baseplate, it can be directly mounted onto RS 2 / RSC 2 and tripod for Acra-Swiss. Allow quick switch among handheld, stabilizer and tripod shooting. Also, an Allen wrench included for easy access and disassembly. Note: Please remove the detachable extended baseplate before attaching stabilizers for DJI RS 2/RSC 2 | 【Featured Recommendations】Features built-in NATO rail that allows you to attach Side Handle 3260 / HSN2093 / HSN2427 quickly. A hole used to follow focus on the side plate able to install 12mm / 15mm Single Rod Clamp 3276 Package includes: 1 x Handle 2439, 1 x Cable Clamp 1639, 1 x Top Plate, 1 x Side Plate, 1 x Baseplate, 1 x Detachable Extended Baseplate, 6 x 1/4''-20 Screw, 1 x User Manual

VERSION 3: Great promotion at special price, the 3rd update for a better experience. | SmallRig Camera Cage 1661 is a form fitting aluminum exoskeleton that protects your camera and offers mounting options to attach accessories. With the camera in the cage, you still have access to the SD card slot, battery compartment, and all camera controls. | The built-in shoe mount is used to connect light accessories, such as microphone, EVF mount and more. A 1/4"-20 threaded hole at the front enables it to attach to 15mm Micro Rod with 1/4'' Thread 915(SmallRig 915) for follow focus. | Compatible with HDMI Clamp 1822(smallRig 1822), wooden handle 1970 (SmallRig 1970), metabones lens adapter support 1787 (SmallRig 1787). Please search "SmallRig APU2389" if you need an arca standard plate to unscrewing the camera from the cage without removing the plate. | The front of the cage is designed for anti-twisting and excellent heat dissipation, beneficial for more enjoyable shoot.

【FORMFITTING FULL CAGE】SmallRig A7S III Cage 2999 maintains access to the camera's controls and hot shoe. Made of premium aluminium alloy, the cage is a solid piece of metal that is highly resistant to oxidation and stands the test of time. | 【PERFECT PROTECTION】The cage incorporates an anti-twist design with an M2.5 screw fixed to the strap hole in addition to the 1/4"-20 camera mounting screw so your camera can't move around in the cage. SmallRig Cage 2999 also incorporates an anti-twist design with padding on the base to protect the camera from scratching. | 【MULTIPLE MOUNTING POINTS】In addition to one cold shoe mount and multiple 1/4"-20 and 3/8"-16 threaded holes, this formfitting aluminum cage features several ARRI-style mounts for preventing accessories from twisting when mounted on the cage. It also comes with a built-in NATO rail on the left of the cage. Mounting holes on the front allow mounting a separately available lens adapter 1764. | 【RECOMMENDATIONS】The cage is compatible with SmallRig universal accessory system. You can attach SmallRig Wooden Side Handle 2093 for hand-held shooting, and SmallRig Cable Clamp 3000 to protect the HDMI cable and port. ARRI-style mounts on the top and side are provided to attach SmallRig ARRI Locating Handle or SmallRig Ball Head Magic Arm. | 【SWEET DESIGN】Lightweight design with only 200g. Strap holes are included to add a separately available wrist strap or neck strap to your rig. Besides, with built-in magnetic suction design, the included Allen Wrench is ready to use without fear of loss.

Compatibility: Compatible with camera cage or external side handgrip with strap slot (width larger than Φ10mm) on both upper and lower sides, or L-Bracket/baseplate with strap slot on the lower side. Please make sure half cage with a wrist strap hole on the bottom when work with your half cage. (A camera split ring is required when using with the L-Bracket/baseplate, and the split ring is not included) | Quick Adjustable and Detachable: The top adopts a convenient press buckle locking method, Convenient for disassembly. The hand strap comes with a -style snap which allows for quick adjustment of tightness to ensure security. It could be quickly tightened without loose with a gentle pull. The strap adjusts to fit hands of all sizes and snaps on easily | Secures Your Camera: Improving shooting stability and safety, effectively protecting your camera from dropping. The surface of the hand strap is made of PU material, which makes the strap wear-resisting and durable | Breathable and Comfortable: Filled with high-quality material, covered with microfiber leather, the hand strap will bring better shock-proof experience and excellent effect of moisture absorption and perspiration, to keep hands dry and comfortable | NOTE: 1. This product must work with cage, side handle, L-bracket, bottom plate with a strap hole. (width larger than Φ10mm) 2. This product does NOT include baseplate. 2. Do not expose to the sun. 3. Wash by hand and dry in a cool and ventilated place

Universal Compatibility: Compatible with camera cage or external side handgrip with strap slot on both upper and lower sides and its width no less than 12mm,or L-Bracket with strap slot on the lower side (a camera split ring is required when using with the L-Bracket, and the split ring is not included) | Secures Your Camera: Enhance shooting stability and grips the hand and wrist to effectively protect your camera from dropping.The surface of the hand strap is made of PU material, which makes the strap wear-resisting and durable | Breathable and Comfortable: Filled with high-quality EVA material, covered with microfiber fabric, will bring better shock-proof experience and excellent effect of moisture absorption and perspiration, to keep hands dry and comfortable | Quick Adjustable:It could be quickly tightened without loose with a gentle pull.The strap adjusts to fit hands of all sizes and snaps on easily. | Note: 1. Safety load: 12.5kg. 2. Do not expose to the sun. 3. Wash by hand and dry in a cool and ventilated place.

Two in One Table Mount: The extendable desk mount is equipped with one 1/4" ballhead and one adapter for ring light, which is a perfect choice for supporting ring light, DSLR camera, smartphone, panel light, etc. It is suitable for making up, live streaming videography, photography, or other shooting work. | Height Adjustable: The desktop light stand is designed with 3 sections extending poles, with a height-adjustable from 13"-33" / 35.4cm-90cm, which provides the possibility for any overhead shootings and lightings. A rubber ring wingnut helps you to fix the pole easier. The bracket is suitable for desktops with a thickness of less than 5cm/1.96". Note: Please pay attention to the size information to avoid purchasing errors. | 360° Swivel Ballhead: The ballhead with top 1/4" screw ensures 360° panoramic rotation for panoramic shooting, -90°/+45° front tilt for multi-angle adjustment, which helps you to easily adjust your device without removing them. The load capacity is 3-10KG. Note: In order to enhance the stability of the bracket, the base of the bracket is an integrated design and cannot be disassembled. | With Extension Arm: The total length of the aluminum alloy extension arm is 355mm, and the load-bearing capacity can reach 2KG. The extension arm is equipped with an 18mm ball head, and the top 1/4" screw can be connected to fill lights, microphones, smartphones, etc. | Tough & Reliable: Made of aviation aluminum alloy material, with the strong tube (diameter 22-25mm), it is more reliable and stable to use and ensures a long time use without getting rusty. The matte surface is easier to clean without leaving any fingerprint.

[Multifunctional Desktop Stand] The desktop light stand is equipped with a 1/4" ball head and a ring light adapter, which can be used for ring lights, DSLR cameras, smart phones etc. Suitable for beauty shooting, live broadcast work, interviews, etc. | [Height Adjustable Camera Table Mount] The camera light stand is designed with 3 sections extending poles. You can adjust the height of the stand according to your own shooting needs. The height adjustment range is: 19"-39" / 48.5cm-100cm(Note: height with ball head and C-Clamp). The operation is simple, and the rubber ring wingnut helps you easily adjust and fix the length of the support rod. | [Angle Adjustable Camera Table Stand] Thanks to the ball head (1/4" screw), you can freely adjust the angle of the product, so as to achieve 360° panoramic rotation shooting. -90°/+45° front tilt for multi-angle adjustment, this design helps you to easily adjust the equipment without disassembly. The maximum load capacity can reach 6.6 pounds/3kg.he ball head is detachable, you can remove it to equipe another device of 1/4"-20 threaded hole, for exemple: 1/4"-20 fluid head. | [Desk Camera Mount] There is a width adjustment button at the bottom. This design can help you adjust the width of the camera bracket to adapt to tables with different thicknesses. It is suitable for tables with a thickness of 4.7cm / 1.85". Compared with the traditional light tripod, this product is more save space. | [Lightweight Desktop Camera Stand] The table camera stand is made of aviation aluminum alloy and has a long service life. The matte surface is easier to clean. It weighs only 15 ounces/430 grams, making it easy to carry.

【ONLY FOR DJI RS 2】SmallRig Extended Quick Release Plate 3031 is specially designed for DJI RS 2 gimbal. It is used to mount professional or larger cameras on your handheld gimbal stabilizer. For example, it is compatible with Canon C100/200/300, RED, Komodo on the RS 2 gimbal. | 【1.6" LONGER THAN ORIGINAL PLATE】The plate 3031 measures 40mm (1.6 inches) longer than the original RS 2 quick release plate to provide additional leverage for larger cameras and provide more room for mounting optional components, such as a rod mount for a follow focus motor, zoom motor, or lens support. | 【ANTI-TWISTING DESIGN】The plate features both 3/8"-16 and 1/4"-20 camera mounting screws for mounting a variety of cameras. You can add Counterweight Kit 3125 to the rear to balance the stabilizer, attach Lens Support 2850 to protect the lens mount, and Focus Motor Component 2851 to connect the RS 2 original focus motor when the lens is mounted on a large camera body or a camera with battery grip. | 【1/4" COUNTERWEIGHT THREAD ON REAR】There is a 1/4"-20 thread on the bottom rear of the plate to add an optional counterweight. It can be used for adding the Counterweight AAW2284 or AAW2285 for balance. | 【RUBBER PADS & MEASUREMENT SCALE】Padding on top of the plate protects your camera from twisting or scratching. Measurement markings on the side allow you to keep track of the best plate balancing position for your camera.

【Compatibility】SmallRig formfitting aluminum half cage 3639 is expecially designed for Alpha 7R V/Alpha 7 IV/Alpha 7S III/Alpha 1/Alpha 7R IV with lightweight protection of the camera. | 【Stable And Anti-twist】It includes two locking side plates and one 1/4"-20 screw at the bottom to lock the camera and prevent deflection and gives access to dials and buttons while retaining the grip experience of a bare camera. | 【Multiple Mounting Points】The half cage 3639 built-in all-around protective spacers protect the camera from being scratched. 1/4"-20 threaded holes, 3/8"-16 locating holes for ARRI, and cold shoes support top handle 2165, side handle 2093, monitor mount 2903, microphones, LED lights, etc. Quick release plate for Arca at the bottom is design for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro and the quick release plate for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizers for stabilizer shooting. | 【Built-In Accessories】This half cage 3639 stores a flat-head screwdriver and allen wrench that facilitates disassembly and assembly. The cage maintains rubber padding to prevent your camera from scratching and scuffing. | 【Note】①HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV cameras and will interfere with the synchroterminal interface when used on Alpha 7R V camera. ②To use the side lock, please remove the split ring on the left side of the camera first | 【Power Backup Solution】SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824

Lightweight and Efficient: The 501PL model, features a two-in-one quick-release plate and double-tube baseplate (another quick-release plate, ID: 4722, specification Touch & Go Plate S, is available). While effectively reducing weight, it can be directly inserted into a tripod without the need for an adapter, allowing you to shoot with ease and efficiency. | Multifunctional Lens Support Design: The snap-in design is easy to install and can be installed in one step, effectively protecting the lens mount. The specially designed roller support is not limited by the position of the zoom ring or focus ring. In addition, the lens support foot is equipped with a lens strap hole for convenient carrying. | Three-Point Connection: The body is linked to the dual-tube system via a flexible hinge design. This hinge is adjustable to ensure compatibility with various model sizes. By combining the lens support and the two-in-one baseplate, a stable three-point support system is achieved, facilitating dynamic tracking, steady lateral lens movement, and uninterrupted target tracking for enhanced stability in capturing images. | Wide Compatibility: Cameras for Sony Alpha 9 III (ILCE-9M3), Alpha 9 III+VG-C5, Alpha 7R V (ILCE-7RM5/α7R V), Alpha 7R V+VG-C4EM, Alpha 7R IV (ILCE-7RM4A/α7R IV), Alpha 7R IV+VG-C4EM, Alpha 7R III (ILCE-7RM3A/α7R III), Alpha 7R III (ILCE-7RM3A/α7R III)+VG-C3EM for Canon EOS R5, EOS R5+BG-R10, EOS R3 for Nikon Z6III+MB-N14, Z6III, Z 7II+MB-N11, Z 7II, Z8, Z9 Lens for Sony SEL600F40GM, FE 400mm f/2.8 GM OSS, 1.4x teleconverter (SEL14TC), 2.0x teleconverter (SEL20TC) for Canon RF400 F2.8 L USM, RF600 F4 L USM, RF800mm F5.6 L USM, RF1200mm F8 L USM for Nikon NIKKOR Z 400mm f/2.8 TC VR S, Z 600mm f/4 TC VR S, Z 800mm f/6.3 VR S | What Can You Get: The package include 1 x 2-in-1 baseplate (501PL), 1 x lens support, 1 x hinge, 2 x Φ15mm carbon fiber tubes (300mm long), 1 x Sony lens top plate, 1 x Canon lens top plate, 1 x Nikon lens top plate, 4 x M4 screws, 1 x hexagonal wrench | Note: The entire set of equipment has an effective load-bearing capacity of 6kg. To avoid any inconvenience and ensure the best shooting effect, please make sure that the weight of the equipment is suitable before use.

Lightweight and Efficient: The Touch & Go Plate S model, features a two-in-one quick-release plate and double-tube baseplate (another quick-release plate, ID: 4429, specification 501PL, suitable for MFT, is available). While effectively reducing weight, it can be directly inserted into a tripod without the need for an adapter, allowing you to shoot with ease and efficiency. | Multifunctional Lens Support Design: The snap-in design is easy to install and can be installed in one step, effectively protecting the lens mount. The specially designed roller support is not limited by the position of the zoom ring or focus ring. In addition, the lens support foot is equipped with a lens strap hole for convenient carrying. | Three-Point Connection: The body is linked to the dual-tube system via a flexible hinge design. This hinge is adjustable to ensure compatibility with various model sizes. By combining the lens support and the two-in-one baseplate, a stable three-point support system is achieved, facilitating dynamic tracking, steady lateral lens movement, and uninterrupted target tracking for enhanced stability in capturing images. | Wide Compatibility: Cameras for Sony Alpha 9 III (ILCE-9M3), Alpha 9 III+VG-C5, Alpha 7R V (ILCE-7RM5/α7R V), Alpha 7R V+VG-C4EM, Alpha 7R IV (ILCE-7RM4A/α7R IV), Alpha 7R IV+VG-C4EM, Alpha 7R III (ILCE-7RM3A/α7R III), Alpha 7R III (ILCE-7RM3A/α7R III)+VG-C3EM for Canon EOS R5, EOS R5+BG-R10, EOS R3 for Nikon Z6III+MB-N14, Z6III, Z 7II+MB-N11, Z 7II, Z8, Z9 Lens for Sony SEL600F40GM, FE 400mm f/2.8 GM OSS, 1.4x teleconverter (SEL14TC), 2.0x teleconverter (SEL20TC) for Canon RF400 F2.8 L USM, RF600 F4 L USM, RF800mm F5.6 L USM, RF1200mm F8 L USM for Nikon NIKKOR Z 400mm f/2.8 TC VR S, Z 600mm f/4 TC VR S, Z 800mm f/6.3 VR S | What Can You Get: The package include 1 x 2-in-1 baseplate (Touch & Go Plate S), 1 x lens support, 1 x hinge, 2 x Φ15mm carbon fiber tubes (300mm long), 1 x Sony lens top plate, 1 x Canon lens top plate, 1 x Nikon lens top plate, 4 x M4 screws, 1 x hexagonal wrench | Note: The entire set of equipment has an effective load-bearing capacity of 6kg. To avoid any inconvenience and ensure the best shooting effect, please make sure that the weight of the equipment is suitable before use.

Universal Compatibility: SmallRig Monitor Mount 3809 features a highly compatible cold shoe on the bottom, which fits camera hot shoe or shoe mount on camera rigs such as camera cages or handles. The 1/4"-20 screw on the top can attach a field monitor, LED light or other accessories. | 360° Swivel & 180° Tilt: This camera monitor holder could swivel 360° and tilt 180°, and keep your monitor or LED light in any fixed position without using tools. | Max Load Capacity: 90° tilt load capacity is 3.2kg, 45° tilt load capacity is 2.5kg, and 30° tilt load capacity is 2.3kg. Its tightness is adjustable on each axis. | Secure Locking: The large thumbscrew head makes installation easily and also features locking holes for an Allen wrench to further tighten it. The protective rubber pad on the top provides more friction to prevent deflection. | What's Included: 1 x Monitor Mount, 1 x Allen Wrench. The 1/4"-20 threaded hole at the bottom enables it to use with Magic Arm such as SmallRig 2070 and Ball Head 2948, etc. | Note: Please do use the Allen wrench to re-tighten the thumbscrew for further security; Please install the monitor before adjusting its angle.

Sturdier Upgrade: Enhanced with non-slip threads and an anti-twist structure based on the classic design of the 1138 crab super clamp, supporting up to 1.5kg without loosening. Allows you to focus on content creation. | Wide Compatibility: The 4373 Multi-Function dual ball head comes with clamps and 1/4"-20 screw to mount cameras, webcams, monitors, lights, microphones, action cameras, or any gear. Then, lock the clamps to the rod/tube/table/frame/tripod with the locking knob; no drilling required. | More Accessories: We have added an adapter mount for GoPro and a phone clamp mount, suitable for more photographers and video producers. Whether you are shooting in a car or fixing your camera on a desktop, these essential accessories are perfect for the video era. | Your Premium Choice: Crafted from aluminum and stainless steel, this super clamp endures years of testing. A product with a decade of sales history, chosen by approximately 300,000 users. We ensure satisfying after-sales service for your peace of mind. | Packaging and Note: We use full kraft paper for packaging, no plastic. Inside the package are a super clamp, a phone clamp mount, and an action camera mount. Please note: When using in dynamic scenarios, ensure to attach the safety rope to prevent any accidental device drops!

【Strong Suction & Solid】Exclusive double-layer suction cup provides long-lasting and stable adsorption to keep the equipment safe. The button of the cups is to lock for further security. The dual suction cups 3566 is desighed for users with car shooting, driving records, mobile shooting and so on. | 【Wide Application】 It can be attached to any dry, smooth and clean surfaces such as metal / ceramic surfaces, car hood, car top roof, trunck lid,etc. Recommended operating temperature range: -40℉ ~ 140℉. Please control the speed under 80km/h on and off-road and check the suction condition before use. | 【Load Capacity】Compatible with lightweight cameras, mobile phones, action cameras and other devices. The load capacity is 0.5kg / 1.1lbs for speeds up to 80km/h (50mph), 3kg / 6.6lbs when not in motion and 2kg / 4.4lbs for lightweight cameras. It is recommended to attach a lanyard and check the equipment every 2 hours. | 【Quick Release & Easy-use】One-button press design for quick removal and installation of suction cups to improve shooting efficiency.The magic arm is attached to the suction cups via a NATO rail at one end and able to quickly mounted onto other NATO rail accessories. | 【Angle Adjustable】The double ballheads structure can adjust the angle according to different usage scenarios and shooting needs. The thumbwheel is easy to mount adjust the tightness. A 20° adjustable space between the two cups allows to be attached to curved surfaces.

?TOP HANDLE?This SmallRig top handle equipped with built-in shoe mount for microphone and LED lights, is designed for handheld shooting, can holds the weight of a large cage rig with various attachments with ease. | ?MOUNTING POINTS?The SmallRig camera handle with abundance of 1/4'' and 3/8'' mounting points, can attach different gears on it for additional attachment options and DIY operations, such as monitor mount 2905, magic arm 2065, wireless remote control 2924, shotgun microphone 3468, led light 3286 | ?COMPATIBLITY?This SmallRig camera handle grip can be attached to a camera cage directly with 2pcs 1/4? screws ( the adjustable space between two 1/4 inch screws is 30mm-40mm), Fits any cage with the standard 1/4?- 20 thread on top, such as SmallRig cage 2087, cage 2168, cage 3667, cage 1661 and most cages of SmallRig. | ?EXQUISITE DESIGN?The versatile handle is made by aluminium alloy, this material is light, durable, is very sturdy and solid, you will feel very safe carrying the rig around with this solid and light handle stabilizer rig. | ?SATISFACTION WARRANTY?All SmallRig camera rigs come with a YEAR warranty, any problem after purchasing please contact us, we will try our best to help you within 24 hours.

More Secure: SmallRig Wrist Strap 3926 is designed to prevent your expensive camera from accidental drops. The weight of 30g will not add extra burden, and the total length is 255mm / 10inches. | Universal Compatibility: Designed for all brand mirrorless cameras, DSLR and other compact cameras. It is attached to camera either by a cord or a metal loop, suited for most camera strap holes. | Comfortable and Durable: Made of high quality genuine leather, microfiber and nylon, it offers great comfort and security around your wrist. Leather with microfiber linings makes it soft, breathable and wearable. | Stylish Design: This camera wrist strap with retro brown color adds elegant vintage elements to your camera. Please note that wrist straps generally have varying colors, for they are made of leather. | Tightness Adjustable: Fit for all wrist sizes with microfiber stopper to cinch the strap in place.

【Quick Leveling Design】The integrated Leveling Base design provides 10 °/- 10 ° angle range adjustment, which is convenient for users to high-speed level. This fluid head features fixed damping for a smooth operation experience. This tripod head can be tilted +90°/-55° and swiveled 360° for multi-angle shooting. | 【Compact and Heavy Bearing】This compact fluid video head weighs only 350g / 0.77lbs, features 88mm/3.46" in height and a 37mm/1.46" diameter in base, which is convenient to carry. The safety payload of this tripod head is 4 kg/8.8lbs. | 【Versatile Compatibility】SmallRig Video Head with Leveling Base CH20 is fully compatible with SLRs, mirrorless cameras, pocket cinema cameras, etc. The bottom 3/8"-16 & 1/4"-20 with screw adapter, compatible with most tripods and monopods. Extendable 1/4"-20 standard threaded hole meets the needs of external magic arms,microphones,etc. | 【Removable Two-Way Handle】Equipped with a removable two-way handle, the pan-tilt enables you to rotate and adjust it for compact storage. The adjustable length is 175mm-240mm(6.9"-9.5"). It enables you to get the best experience in overhead or elevation shot. Besides, a included Allen wrench makes it easy to install or remove your camera. | 【Upgrade Functional QR Plate】The QR plate features a retractable anti-drop design at its bottom, complete with a telescopic pin that keeps the camera steady and secure. The design accommodates two screws, helping prevent any deflection during video shooting. Please note that the additional screw packaging is not included. | 【Package Includes】1 x fluid head, 1 x quick release plate (for Arca-Swiss standard), 1 x Allen wrench, 1 x 1/4 "- 20 thread adapter, 1 x Instructions.

Compact and Portable: SmallRig CH3 video head is a compact fluid video head that weighs only 271g / 0.6lb, but it can load up to 3kg / 6.6lb. It features a 75mm height and a 44mm base diameter, making it incredibly portable. The fluid head dimension is: 240mm*55mm*85mm | Pan and Tilt Adjustment: The fluid head features fixed damping for a smooth operation experience and this tripod head can tilt +90°/-70° and swivel 360° using with handle for multi-angle video shooting | Quick Release Plate: This fluid head comes with a quick release plate for Arca-Swiss, which can be switch the mounting direction, supporting using with cage and L-bracket, and allowing you to switch between handheld and tripod quickly | Removable Telescopic Handle: This tripod head comes with a detachable handle, can be removed and installed on the left and right sides, and also compatible either on the front side or back side, for easier storage and more portability | Wide Compatibility: The quick-release plate on the top of the fluid head has a 1/4"-20 screw, that can be directionly mounted on a camera or cage. The bottom has a 3/8 threaded hole, compatible with most tripods and monopods.Besides, this tripod can support accessories like a magic arm via the anti-deflection 1/4"-20 threaded hole

For DIY Camera Accessories : 1/4" 20 extension plate is useful and versatile little bar for DIY camera mount. It comes with many fixing points. Use it to interconnect various camera accessories and set up extra parts as needed | Multiple Thread Holes: small cheese plate camera accessories 1091 is equipped with industry standard 1/4"-20 and 3/8"-16 threaded holes, which make it possible to mount on any 1/4"-20 and 3/8"-16 accessories | Multiple Functions: It’s handy for all those little conversion fit this camera mounting adapter, it can be used as an on-camera multi-gadget mounting accessories, or simply use it as an additional handle when fitted to the top of a camera | Easy to Carry :Supplied with arrays of mounting holes in standard 9mm spacing .Easy to put in the bag | Package Includes: 1 x Cheese Bar; 2 x 1/4'' Screw ; 2 x M4 Screw; 1 x 1/4'' Double Head Screw ; 1 x Hex Screw

【VERSATILITY】SmallRig 2732 comes with a super clamp with 1/4" and 3/8" threads and an articulating arm with 1/4” screws on both ends respectively | 【SUPER CLAMP】This super cool clamp was made of lightweight aluminum alloy, comes with 1/4"-20 and 3/8"-16 thread and can be mounted virtually anywhere, such as cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It can open maximum 54mm and minimum 15mm | 【360°ROTATION】Double 360 degrees Ball Head Articulating design adjusts any angles based on your needs. With 1/4" thread on both ends to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, microphone on one end and other accesorries like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc | 【RUBBER CUSHION】Both the Super Clamp and the Articulating Magic Arm features a rubber cushion which could prevent the scratches of monitor and help to lock your accessories tighter | 【WHAT YOU CAN GET】Made of aluminum alloy and stainless steel, sturdy and durable. Package includes: a Super Clamp and a Articulating Magic Arm

COMPATIBILITY: SmallRig Cold Shoe Adapter with Windshield is exclusively designed for Sony ZV-1 II / ZV-1 / ZV-1F / ZV-E1 / ZV-E10. It is providing the simplest vlog solution for Sony ZV-1 II / ZV-1 / ZV-1F / ZV-E1 / ZV-E10 creators. | LED LIGHT RELOCATION: SmallRig 3526 allows the camera to be fitted with both a windshield and a LED light. It solved the problem that the hot shoe is occupied and accessories cannot be installed. | FAUX FUR MATERIAL: The windshield dedicated microphone faux fur material and thickened inner design for effective noise reduction during outdoor shooting. | NYLON-MADE COLD SHOE: The cold shoe adapter has high-quality nylon with more strength. It toughness and features a scratch-resistant cushion on the bottom, which locks the camera securely. | COMPATIBLE WITH THE ORIGINAL WINDSHIELD: The cold shoe adapter is compact, lightweight, and easy to carry around. The kit is compatible with the original windshield of the camera. | Power Backup Solution: SmallRig NP-FW50 camera battery charger set is available now, two 1030mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FW50 Battery 3818

It includes a 1/4’’ counter bore slot and a cold shoe. 1/4’’ counter bore slot could be mounted on the 1/4’’ threaded holes on the right side of Cage for Sony A6500 1889. | The arrowheads on the cold shoe point to anti-off direction. | The cold shoe is compatible with RODE microphone, wireless microphone and RODE SVMX microphone. | The cold shoe extends beyond the cage, thus it will not block the buttons and ports of the cage. | Material(s): Aluminum Alloy

SmallRig Cold Shoe (2pcs Pack) 2060 could be mounted on any camera accessories with 1/4" and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc. Such as cage for sony (a6500 a6300 a6500), cage for panasonic (gh5 gh4 gh3), etc. | The counter bore hole in the center is attachable to a 1/4’’ screw, but the 1/4’’ screw will not touch the hot shoe contact of accessories mounted on the cold shoe. | There comes with two secure bending bevels on the one end to prevent accidental removal | The arrowheads on the cold shoe show the direction to mount additional accessories.

Standard shoe mount Compatible: allow you to attache Micorphone, Flash, LED, Handle, etc. Fit for all the accessories with 1/4"-20 threaded holes. | This 3rd version: 1. One short screw meets your need and help you to protect your equipement. 2. There comes with two secure bending bevels on the one end to prevent accessory accidental removal instead of a small screw on the cold shoe. | Secure tightly via the two M2.5 screws, and a 1/4" thread hole for you to attache to camera cage, plate, handles, or other accessories. | We specially offer two white arrows on the surface to show the mounting ways for your convenience. | Package included: 1 x 1/4"-20 screw; 2 x M2.5 Screws; 2 x Hex spanner Diamatre : 25mm x 25mm; Material: Aluminum Alloy

SmallRig Multi-function Double Ballhead 1138 is a multifunctional double ball head with a clamp at the bottom and a 1/4" screw on the top. | It can mount monitor and LED Lights on the one end via 1/4’’ screw, and it can lock the rod on the cage via the clamp tightened by the locking knob. | It could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting. | The rod clamp fits for DJI Ronin & FREEFLY MOVI Pro & all 30mm rods and can also be adjusted with ease. | The best load < 1.5kg

【Wide Application】A universal double ball head with cold shoe and 1/4’’ screw on both ends, and can be widely used with a monitor/small action camera/LED Lights/microphones/flash when shooting | 【180 Degree Rotation】The ball mount can be easily rotated by 180 degrees and secured by the side wingnut for a perfect viewing angle | 【Easy to Lock】the locking knob is used for securing and operating the ball head faster | 【Comes with Shoe Base】The ballhead comes with a shoe base, which could mount on a camera cage/handle/plate, or directly on cameras such as or Canon, for Nikon, for Olympus, for Pentax, for Panasonic, for Fujifilm & for Kodak. | 【NOTICE】not recommend for monitor or LED light over 1.0 kg/2.2 lbs.

【FOR BALANCING CAMERA ON GIMBAL】SmallRig Counterweight Kit 3125 is designed to balance cameras with long-lens setups on gimbals by mounting counterweights behind your camera. | 【COMPATIBILITY】It clamps onto the camera plate via a thumbscrew and is compatible with popular stabilizers on the market such as for DJI Ronin-S, RS 2/RSC 2/RS 3/RS 3 Pro, and for ZHIYUN Crane 2S/3S/Weebill-S, etc. | 【STACKABLE VIA 1/4"-20 SCREW AND HOLE】There are multiple 1/4"-20 threaded holes at the bottom, and counterweights can be stacked to meet the balance request in different scenarios. | 【CONVENIENT FOR STORAGE】SMALLRIG 3125 is made of aluminum alloy and stainless steel, corrosion resistance. The small shape is convenient for storage, and with strong versatility. | 【WHAT YOU GET】Package Includes: 1 x Mounting Clamp, 2 x 100g Counterweights.

【COMPATIBILITY】the C5521 to LEMO 2-Pin charging cable is compatible with Blackmagic Design Pocket Cinema Camera 4K & 6K for battery usage | 【HIGH CUSTOMIZATION】SmallRig DC5525 to 2-Pin Charging Cable 2920 can be also used with the SmallRig NP-F Battery Plate 3168 | 【CONNECTION】It plugs into BMPCC 4K/6K at one end and connects to the battery plate via the 5.5/2.5mm DC male connector | 【PLEASE NOTE】Please plug the cable to the 12V output on the battery plate | 【PARAMETER】The total length is 40cm/15.74 in. Made of ABS, the cable 2920 weighs only 17g±5g/0.59oz

【COMPATIBILITY】SmallRig 2922 is compatible with Sony Alpha a9 II/a9/a7R IV/a7R III/a7 III/a6600 Cameras. | 【HIGH CUSTOMIZATION】SmallRig DC5521 to NP-FZ100 Dummy Battery Charging Cable 2922 can alose use with the SmallRig NP-F Battery Plate 3168, which could achieve charging without opening the battery port for changing the battery. | 【CONNECTION】 It plugs into the FZ100 battery-powered camera at one end and connects to the battery plate via the 5.5/2.1mm DC male connector. | 【PLEASE NOTE】Please plug the cable to the 7.4V output on the battery plate. | 【PARAMETER】The total length is 60cm/23.6". Made of ABS, the cable 2922 weighs only 36g±5g / 1.27oz. | 【RELATED PRODUCTS】SmallRig 3168 (battery plate for charging), SmallRig 3824 (NP-FZ100 Camera Battery and Charger Kit).

【Adjustable Step-less Damping】SmallRig Tripod Fluid Video Head 4165 is a professional fluid head to facilitate video shooting. It features an adjustable step-less damping system and allows you to pan the camera smoothly at a variety of speeds you desire. | 【Quick Mode Switching】The heavy fluid head adopts a newly-designed snap-on quick-release plate mount and can realize quick assembly. Also, it is compatible for DJI RS 2 / RS 3 / RS 3 Pro quick release plate and for Manfrotto quick release plate to realize a free switch between stabilizer shooting and tripod shooting. | 【Max Load up to 10kg / 22Ibs】The maximum capacity of this tripod head can be up to 10 kg / 22Ibs. And the compact fluid video head weighs only 1268g / 2.79 Ibs, features 140mm / 5.51inch in height and a 75mm / 2.95inch diameter in base, which is convenient to carry. | 【Professional Fluid Video Head】The fluid head is equipped with removable telescopic handle, which can be rotated and adjusted to make storage more compact. The adjusted length is 230-360mm / 9.05-14.17inch. And it suits both left-handed and right-handed users. With the handle, this tripod head can be tilted +90°/-60° and swiveled 360° for multi-angle shooting. | 【With One 1/4"-20 Threaded Hole】The video head also comes with one 1/4"-20 threaded hole to support the magic arm and other accessories and built-in a wrench to help install and release the camera. The package includes video head DH01 x 1, allen wrench x 1, user manual x 1. | 【Notice】This product is not compatible with SmallRig Quick Release Plate for Manfrotto-Type 3912

6-Step Counterbalance Dynamic Adjust: The professional fluid head features an adjustable 6-step dynamic counterbalance system (1, 2, 3, 4, 5, 6). The counterbalance system support to balance the camera or other rigs (Maximun Weight: 1-8 kg/2.2-17.6lb) and ensure that it can be firmly positioned at any tilt angle, providing an extremely smooth shooting experience. | Adjustable Step-Less Damping System: The video fluid head features the adjustable step-less damping system t, which can accurately adjust the rotation and tilt damping force to provide smooth pan and tilt camera movements. It support tilte +90° or -60° tilte and 360° swivel for multi-angle stable shooting. | Compact and Rubust: The video head features (15cm / 5.5inch) in height and weighs only 1.9kg / 4.2lb, but it can carry a payload up to 8kg / 17.6lb. CNC-machined aircraft-grade aluminum tripod head, making it durable.The tripod head also comes with one 1/4"-20 threaded hole to support the magic arm or other accessories. | Quick Mode Switching: The DH12 fluid head adopts a new Touch-and-Go quick release mount plate design which does not require alignment and is more efficient than traditional slide-in plates. It is compatible with quick release plate for DJI RS Series and quick release plate for Manfrotto, realizing a free switch between stabilizer shooting and tripod shooting. | Detachable Telescopic Handle: It is equipped with a user-friendly detachable telescopic handle, allowing rotation and attaching it to both the left and right sides, making it suitable for any grip. The handle adjusted length is 35 - 53 cm / 13.8 - 20.9in.

Wide Compatibility: This LP-E6NH dummy battery replaces for Canon LP-E6NH and works for Canon R , R5 , R6 , R5 C , R7 , R6 Mark II, 5D Mark II / III / IV, 6D , 6D Mark II , 7D , 7D Mark II , 60D , 60Da ,70D , 80D , 90D , XC10 , XC15 , 5DS , 5DSR cameras | Continuous Power Supply: A dummy battery allows you to use the D-TAP plug-in to continuously power your camera from an external power supply. This means that you don't have to worry about changing the battery or the battery overheating and losing power because of recording for a longer time. It is a good choice for video conference, live streaming, time-lapse photography, live broadcast, extending studio sessions, uploading files to PC and more | Easy to Use: This LP-E6NH dummy battery works well with most of V-mount battery on the market with the D-TAP output. And also compatible with SmallRig V-mount battery VB50(Asin:B0BQLV3W1F), VB99(Asin:B0B6Z9K42P), VB155(Asin:B0B6ZCNF1P) | No Warning: Fully decoded battery, you don't have to worry about the warning pop-up that the battery will damage the camera, same size as the original LP-E6NH camera battery, so there is no need to worry about it getting stuck | Safe & Reliable: Overvoltage, overheating, and overcharge short-circuit protection alongside fire-resistant PVC and ABS make this item safe and reliable

Wide Compatibility: This NP-FZ100 dummy battery replaces for Sony NP-FZ100 and works for Sony Alpha A9, A9II, A7R III, A7R IV, A7 III, A6600, A7R II, A7S III, A7S II, A7C, A1, FX3, A7 Ⅳ, A7R V, ZV-E1 cameras | Continuous Power Supply: A dummy battery allows you to use the D-TAP plug-in to continuously power your camera from an external power supply. This means that you don't have to worry about changing the battery or the battery overheating and losing power because of recording for a longer time. It is a good choice for video conference, live streaming, time-lapse photography, live broadcast, extending studio sessions, uploading files to PC and more | Easy to Use: This NP-FZ100 dummy battery works well with most of V-mount battery on the market with the D-TAP output. And also compatible with SmallRig V-mount battery VB50(Asin:B0BQLV3W1F), VB99(Asin:B0B6Z9K42P), VB155(Asin:B0B6ZCNF1P). | No Warning: Fully decoded battery, you don't have to worry about the warning pop-up that the battery will damage the camera, same size as the original NP-FZ100 camera battery, so there is no need to worry about it getting stuck | Safe & Reliable: Overvoltage, overheating, and overcharge short-circuit protection alongside fire-resistant PVC and ABS make this item safe and reliable

【FOR DJI RS Series】SmallRig Dual Handgrip 3027 is specially designed for DJI RS 4 / RS 4 Pro / RS 3 / RS 3 Pro / RS 2 / RSC 2, which can work with some extra comfort and stability when shooting. Enabling you to hold your gimbal with both hands, this handgrip is designed to reduce arm fatigue, especially during long shooting sessions. | 【INSTALLATION】By using NATO clamps, the dual handgrip secures to the NATO rail on each side of the gimbal, easy for detachment and time-saving. | 【DUAL NATO RAILS】The handgrip is designed with two-side NATO rails, which is not only horizontal adjustable, but also easy for detachment and support shooting in inverted mode. | 【DISASSEMBLES FOR STORAGE/TRANSPORT】The matte surface perfectly matches the industrial design of the gimbal. It disassembles into four part for easy storage and transport. Anti-removal stud to secure the accessory from falling by accident. | 【MULTIPLE MOUNTING POINTS】Built-in multiple 1/4"-20 and for ARRI 3/8"-16 threaded holes allow you to easily mount separately available accessories. For example, you could attach Magic Arm for monitor. Cold shoe ports and NATO rails can be used for Monitor Mount 2905, wireless go, microphone, sound receiver, etc.

【Composite, Aluminum & Wood Grain Design】SmallRig Modular Follow Focus F60 3850 is designed to control your lens focus with smooth, fine adjustments in video shooting. It's core drive is made of environmentally friendly brass and super composite material, enables fine-tune adjustment for an improved experience. | 【Streamlined Mounting】You can mount this follow focus onto your rig using the included 15mm rod clamp. It is compatible with most lenses, including standard cine lenses using its 0.8 MOD gear, and focus gear ring, M0.8-65T Gear (ID: 3200) and M0.8-38T Gear (ID: 3285) . It can also be used with the M0.8-43T gear for smoother focus pulls on mirrorless / DSLR lenses. Note: The included silicone gear only supports SLR / mirrorless lens. Just remove it before using a cinema lens. | 【Non-Stop Damping】SmallRig 3850 supports lenses of various damping, thanks to an innovative, adjustable non-stop damping system. The adjustable dynamic damping adjustment from 0.6kgf to 1.8kgf, accommodates different diameter lenses, for perfect focusing control. | 【Quickly Switch & Detachable Palm Support】This follow focus basic kit features one-button pull design and a 3-step A/B stop function to set direction reverse or forward, or it can rotate 360° when controlling a zoom lens. It also features a quick-release palm support that ensures stability in shooting handheld. | 【Modular Design】Its modular accessories include Silicon Gear (ID: 3852), which directly drives lens focus by friction (Note: To avoid gear slippage, please ensure the silicone gear fits tightly with the lens ring, particularly for large-damping zoom lens), and optional Single & Dual 15mm Rod Clamp (ID: 4151), Focus Adapter Part (ID: 3851), and Quick Release Plate (ID: 3853), all compatible with SmallRig accessory system. Besides, it can also work with standard joystick and focus whip. | 【What In the Box】Follow Focus x 1 (Included M0.8-43T Gear x 1) , Quick Release Arm x 1, Silicone Gear x 1, Φ15mm Rod x 1, Rod Clamp (with NATO rail) x 1, Snap-on Gear Ring x 1, Palm Support x 1, Screwdriver x 1, Carrying Bag x 1

【FOR MONITOR MOUNT WITH COLD SHOE】SMALLRIG Monitor Mount 2346 is designed to hold your monitor onto the top of the camera or other mounting systems via a cold shoe adapter, which achieves lightweight design without any accessories. It can be tightened by hands via the thumbscrew. The field monitor mount is compatible with 5 inch and 7 inch monitor | 【SWIVEL AND TILT】The camera monitor holder enables to swivel 360° sideways and tilt 140° with free-stop in any positions. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios | 【FIRM LOCKING】The field monitor holder connects with monitor firmly via a 1/4-20 screw on the bottom. The size of the thumbscrew head is increased so that it’s easy to install. Both thumbscrews features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off | 【RUBBER CUSHION】This SMALLRIG camera monitor mount comes with rubber cushions on top of the holder, which can increase the friction and protects the monitor from scratching | 【HIGH QUALITY】The robust mount is CNC-Machined Aluminum and can support 5 inch and 7 inch monitor up to 1.2kg, which makes it lightweight and durable at the same time

【SPECIAL PURPOSE】SMALLRIG DSLR Monitor Holder Mount 2100 allows an easy and fast adjustment of monitor viewing angle and enables the cameraman to have better monitoring as per the needs in different shooting scenarios. | 【160° ROTATION ADJUSTMENT】Rotation axis enables SMALLRIG DSLR monitor holder mount to adjust the position of monitor up to 160° with only one hand for better monitoring as per your needs at different directions during shooting. | 【QUICK RELEASE】 SMALLRIG camera field monitor Bracket can be secured with thumb screw or hex spanner through the tightening of the 1/4'' threaded screw on the top. Quick release on any cage with NATO rail, such as SMALLRIG a6300 / a6500 Cage 1889 or SMALLRIG Safety Rail 1195. It could be locked tight with the red locking lever quickly. | 【STRUCTURE】 This camera field monitor compatible with both 5'' and 7'' monitors. The ultra-compact structure features height of 46mm only. Rubber cushion on the top is utilized to prevent the monitor from any scratches and damages. Two M5 screws are applied for damping based on the weight of monitors. | 【PLEASE NOTE】The maximum load of this item is 1.5kg

Upgraded Version: SMALLRIG 2905B is an upgraded version monitor mount. It is designed to support 5” and 7” camera monitors via cold shoe on top of camera cages or handles | Upgraded Version: SMALLRIG 2905B is an upgraded version monitor mount. It is designed to support 5” and 7” camera monitors via cold shoe on top of camera cages or handles | Anti-Twist Design: The camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V/ V+, and silicone pad to prevent the monitor from scratching and twisting | Wide Compatibility: Features cold shoe adapter at the bottom to connect camera cage, 1/4"-20 threaded hole for magic arm or stabilizer. 1/4"-20 screw on the top support monitor, microphone, light, etc | Note: Different tilt angle has different load capcaity, 90° load capacity＜9.3 lbs; 45° tilt load capacity＜5.5 lbs, 30° tilt load capacity＜5 lbs. For the safety, please do use the Allen Wrench to re-tighten the 1/4'' knurled screw for further security

More Durable Tilt Axis: The swivel and tilt monitor mount supports 180° tilt and 360° swivel adjustment, you can quickly adjust the tightness of the tilt axis through the knob. The attenuation rate after 10,000 times of tilt adjustment is less than 20%. | Hand-Tighten Knob: The monitor holder adds a hand-tighten knob, so that the tightness can be quickly adjusted by your hand, and it also has a wrench reinforcement hole for easy disassembly and assembly with the included Allen wrench. | Stronger Load-Bearing Capacity: Maximum load-bearing: 90° < 4.2kg, 45° tilt < 2.5kg, 30° tilt < 2.3kg. Excellent weight capacity makes it suitable for almost all 5" & 7" monitors. | Double Anti-Deflection Design: The top of Field Monitor Mount 2906B has a built-in spring-loaded positioning post and a silicone gasket, which is designed for Ninja V / V+ monitors to prevent deflection. | Quick-Release NATO Clamp: The NATO clamp mount can be used with standard NATO rails, such as SmallRig 1409/2172, which can realize quick disassembly and assembly, and makes your shooting more efficient and time-saving.