Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once. | This SDI Cable is a 75 ohm coaxial cable complete with two male original BNC connectors designed to support the transfer of both RF and video signals, particularly HD quality video signals. The 18 AWG gauge cable is FPE insulated and constructed with high density OFC braided shielding to reject both EMI and RF interference. | Connector type:Original BNC male to BNC male | Length: 1 meter. We can customize cables with other length, if you need custom cables, please send a message to us before making the order. | Connector cover: AL, Shelter: double shelter, aluminium-foil paper+internal copper net, Resistance: 75Ω, Frequency: 0~2GHz.

This 3.5mm to BNC cable is to feed timecode signal from a Deity TC-1/ Tentacle Sync E mkII Timecode box generator to various cameras and devices (for Canon C70/C300 MK II/ C300 MK III/ C500, Sony F55/ FX9/ FX6 cameras, Zaxcom, Zoom F4/ F8/ F8n/ F8n Pro, Sound Devices, Blackmagic Ursa Mini, JVC broadcast cameras, for Panasonic broadcast cameras.) | This cable can also feed timecode out from BNC to 3.5mm TRS. | Plug A: Right Angle BNC Male connector. Plug B: Right Angle Lock 3.5mm TRS Connector. | Cable Length: 50cm (19.7 inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Every cable was tested to ensure that there are no short circuit ,no potential breakdown problems before shipping, and it works great! | This is for the Z Cam E2 and you could use a V Mount to power it up | Cable Length：Max length could be 24inches (61cm). | Custom Length: other length of the cables, we could customize with it, please contact with us | Plug A: 4 pin with half moon female(2 pin male +2 pin female); Plug B: D-tap Male.

Every cable was tested to ensure that there are no short circuit ,no potential breakdown problems before shipping, and it works great! | This is for the Z Cam E2 and you could use a V Mount to power it up. | Cable Length：12 inches (About 30cm). | Custom Length: other length of the cables,we could customize with it,please remark words or contact with me | Plug A: 4 Pin with Half Moon Female(2 Pin Male +2 Pin Female); Plug B: D-tap Male.

Used normally to power Cameras like Blackmagic's Cinema camera/4k. Can also be used to power DC 2.5 or 2.1mm lights such as Litepanels. | Cable Length: Max length 31.5 inches. | Plug A: Hirose Right Angle 4 Pin Male; Plug B: DC Jack Centre Positive. | Be compatible with Blackmagic cinema/4k (Not for BM Pocket use). | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Generally it is used to power cameras like Blackmagic's cinema camera/4k as well as DC 2.5mm lights such as Litepanels. | Plug A: Hirose 4 Pin Male Right Angle; Plug B: DC Jack Central Positive. | This cable is not compatible with BM Pocket. | Cable Length: 45CM. We can customize cables with other length, please contact us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

【Adjustable Screw Spacing】Based on feedback on the screw spacing, we made adjustments. The screw spacing of upgraded box can be adjusted between 15mm-18mm, compatible with more devices. | 【Efficient and Convenient】This mini splitter converts one 0B 2 pin female input port to three 2 pin female output ports, being able to supply power to three devices at the same time. With two 1/4" screws, the splitter box can be mount on a camera, Steadicam, gimbal, etc., which makes shooting more convenient. | 【Strong Compatibility】It is for SmallHD Cine7 monitor, Teradek 500xt, a Teradek MDR.X with MOTR.X, camera accessories, Tilta accessories, camera monitor, EVF, wireless video transmission equipment, audio recorder etc. | 【Compatible Cable】You can use all 0B 2 pin power cables, and it will work better with Alvin's rotatable right angle 2-pin which is not limited by the red dot position. | 【Details】Plug A: 0B 2 pin female (Input). Plug B: Three 0B 2 pin female (Output). Material: Solid Aluminum. Output: 2A max at 14.8V (there is no fuse and voltage regulator).

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement. | Plug A and B：6 pin hirose male | Cable Length:1M, we can customize cables with other length, if you need custom cables, please send a message to us before placing the order.

Wider Compatibility: It works with Atomos Ninja V @ 4K / 60fps. It can record 4K 60 fps on Z-CAM or C70 to Ninja-V Monitor, no frame drop. It also works with 8K TV and Sony A7S3,A9,A74 and so on. | Perfect Size: Featuring 18 to 28 inches braided coiled cable, the perfect length for your film pro cameras and monitor combinations, this cable helps to keep your filming environment neat when connecting your camera to monitor, in addition, it avoids the situation of twinning with other cables. | Cable Length: Min length 18 Inches (6in+6in+6in),Max length: 28 Inches, we can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Connectors: Plug A: Full HDMI, Plug B: Full HDMI. | Safety and Service Assurance: Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

Wider Compatibility: It works with Atomos Ninja V @ 4K / 60fps. It can record 4K 60 fps on Z-CAM or C70 to Ninja-V Monitor, no frame drop. It also works with 8K TV and Sony A7S3,A9,A74 and so on. | Perfect Size: Featuring 18 to 28 inches braided coiled cable, the perfect length for your film pro cameras and monitor combinations, this cable helps to keep your filming environment neat when connecting your camera to monitor, in addition, it avoids the situation of twinning with other cables. | Cable Length: Min length 18 Inches (6in+6in+6in),Max length: 28 Inches, we can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Connectors: Plug A: Full HDMI, Plug B: Full HDMI. Color: Black | Safety and Service Assurance: Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement. | PRO DC Power Adapter With 4 Pin Male HIROSE Connector 110 VOLT AC TO 12 VOLT DC. | Cable Length:1.5m(we can customize ,if you need other length, please remark words or contact me).

Every cable was tested to ensure that there are no short circuit ,no potential breakdown problems before shipping, and it works great! | Power your Teradek Bond cellular bonding solution from a PowerTap power source (it is for ARRI RED Paralinx Preston Transvideo Offhollywood Switronix Panasonic too) | Cable Length:45cm (about 18in) in stock. | Custom Length: Other length of the cables,we could customize with it,please remark words or contact with me | Plug A: Standard Male D-Tap; Plug B: 2 Pin 0B Male Connector.

This is for Heden or Bartech Wireless Follow Focus. (Please note:this one isn't for Teradek or ARRI. If you need the one for Teradek or ARRI, please visit my store or contact me, thanks!) | Plug A: Standard male D-Tap. | Plug B: Right Angle 2 pin male connector. | Cable Length: 1.5M. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us. | Power your ALEXA MINI Camera with battery that with D-tap power output plug. | Works with ALEXA MINI Camera. | Cable Length:100cm (about 39in) in stock. We can customize cables with other length, please send a message to us if you need. | Plug A: 2B Right Angle 8 Pin Female; Plug B: D-tap Male.

Video Devices PIX-E7 7 touchscreen display power Cable Anton Bauer Power Tap D-Tap to 2.1*5.5mm lock DC, Hollyland Mars 400s. | Cable Length: 2 meters. We can customize cables with other length, please send a message to us if you need. | Plug A: D-tap Male. | Plug B: Locking DC 2.1. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

Audio cable for your ARRI Mini LF. | Plug A: 6 Pin Male Connector. | Plug B: Right Angle 3.5mm TRS. | Cable Length:20 inches (50 cm) in stock. We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Super flexible and thin 3G HD SDI Cable. | Cable Length:60cm (about 24in) in stock. We can customize cables with other length, please send a message to us if you need. | Connector type: Right angle BNC male to Right angle BNC male. | 75 ohm

Connector type: Right angle BNC male to right angle BNC male. | Shelter: Double shelter, aluminium-foil paper+internal copper net. | Resistance: 75Ω; Frequency: 0~2GHz. | Cable Length: 30CM. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

D-Tap (P-Tap) Power cable for the new Pocket 4K Camera from BMD. | AlvinTap (Protective DTap): It can prevent your device from short circuits caused by reverse insertion or using an incompatible cable, which will avoid damaging your device. Built-in microprocessor electronic control can identify automatically whether the plug inserts positively. When D-tap is inserted correctly, green light is always on, which means power on. When reverse insertion, power will be cut and the red light will flicker. | Plug A: 2 Pin Female; Plug B: D-tap with indicator light. | Cable Length:19.7 inches (About 50cm). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | The 2 pin connector is a push-pull self-locking connector. It will automatically lock when inserted into the camera. It is impossible to pop off. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector.

D-Tap (P-Tap) Power cable for the new Pocket 4K Camera from BMD. | Plug A: 2 Pin Female. | Plug B: Standard Male D-Tap. | Cable Length:1m (about 39 inches) in stock. We can customize cables with other length, please send a message to us if you need. | The 2 pin connector is a push-pull self-locking connector. It will automatically lock when inserted into the camera. It is impossible to pop off. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector.

Super flexible and thin 3G HD SDI Cable, 75 Ohm | For Blackmagic BMCC Video Camera. Be able to transfer 4K from Sony FS5 to Atomos Shogun Inferno. | Connector type: Straight BNC male to Straight BNC male. | Cable Length:50CM. We can customize cables with other length, please contact us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement. | This cable is SMPTE Time Code in. | BNC connector in one end and a Right Angle 5 pin male in the other end You could go from your lockit box to BNC connector to 5 pin ( right angled ) to the Alexa mini Timecode input. ( About the detail, please contact me ) | Compatible with many audio recorders and cameras (Sound Devices, AATON, Red, ALEXA, etc...) | Cable Length:1M ( 39 inches ). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order.

For Panasonic DMC-GH5 GH4 GH3. | Enable you to charge cameras powered by DMW-DCC12 with an external high capacity V-mount or Gold mount batteries. | Largely prolong camera shooting hours or devices service time. | Cable Length: The max length is 35.4 inches (90cm). | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

The 2 pin connector is a push-pull self-locking connector. It will automatically lock when inserted into the camera. It is impossible to pop off. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector. | Power Cable for Moza air 2 to BMPCC 4k | Cable length：Min length 12 inches,Max length 36 inches | Male DC barrel fits both 5.5 x 2.5mm and 5.5 x 2.1mm female DC ports | Plug A: 2 Pin Female. Plug B: DC Male

The 2 pin connector is a push-pull self-locking connector. It will automatically lock when inserted into the camera. It is impossible to pop off. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector. | Power Cable for Blackmagic pocket cinema camera 4k | Male DC barrel fits both 5.5 x 2.5mm and 5.5 x 2.1mm female DC ports | Cable Length: 3 foot (90cm),22 AWG | Plug A: 2 pin Female. Plug B: DC male

Power your Teradek Bolt, Z-CAM E2 Flagship Series Cameras (E2-S6, E2-F6, E2-F8) from 12V DC output battery plate | Plug A: Right Angle 2 Pin Male. | Plug B: Right Angle DC male. | Cable Length:45cm (about 18in) in stock. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Normally to power Blackmagic's cinema camera 4k, Sound Devices 633/644/688, ZOOM F8 recorder. | Can also be used to power DC 2.1 or 2.5mm lights such as Litepanels. | Cable Length:45cm/18 inches. We can customize cables with other length, please send a message to us before making the order. | Plug A: Right Angle DC. Plug B: Hirose 4 Pin Male. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us. | This 75ohm RG179 HD SDI Cable works for your Blackmagic. | Plug A: DIN 1.0/2.3 Right Angle. | Plug B:Right Angle BNC Male. | Cable Length: 30CM. We can customize cables with other length, please send a message to us if you need.

Enable you to charge cameras powered by DMW-DCC12 with an external high capacity V-mount or Gold mount batteries. | Compatible with Panasonic DMC-GH5/GH4/GH3. | Cable length: 1.6m; the cable length is manually measured, there may be an error of 1-5cm! | Please Note: Because the Gold Mount Battery (Or same type battery) voltage output cannot reduce when the capacity of battery decreases, it will not give indication of the current charge level status of the battery, but if you use NPF970 battery to power it, it will be ok.

This DMW-DCC8 dummy battery is compatible with Panasonic Lumix DC-G90, DC-G91, G95, G99, DMC-GH2, GH2K, GH2S, G5, G6, G7, GX8, G85, G81, G80, DMC-FZ200, FZ300, FZ1000, FZ2000, FZ2500 Cameras. Input: QC/PD 9-20V. Output: 8.4V. | The USB-C interface can work with PD supply fast chargers such as 9V,12V, 15V, 20V, or power bank with PD protocol output. | DMW-DCC8 dummy battery has a built-in safety protection IC to protect your device from overcurrent, overheating, overcharging and short circuit. | Cable Length: Min length: 15.7 Inches/40cm, Max length: 35 Inches/90cm, we can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

D-tap splitter hub allows you to power multiple cameras and devices at the same time from V-Mount, Gold-Mount Battery or other power source with D-tap output. Featuring d-tap female sockets of different directions, the cable allows you to change the direction of dtap. | The cable comes with a 1/4" screw, making it easily and firmly mounted on your camera rigs or device. | Plug A: D-tap Male Connector; Plug B: 4 Port D-tap Female Connector. | Cable Length: 15.7 inches (40cm). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

With this PowerTap Receptacle,you can expand any Power Tap to accommodate up to four separate,Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery. | Cable Length: 27.6 inches (70 cm). We can customize cables with other length, if you need custom cables, please send a message to us before making the order. | At the D-tap end of cable equips with a strain relief which is a standard fixture for electrical cables that functions as a feature for relieving the stress from the cable connections themselves to prevent them from breaking. | Plug A: D-tap Male Connector; Plug B: 4 Port D-tap Female Connector. | Every item will be sold until they were tested and turned out to be no short circuit, no latent breakdown problems. If the cable you received is defective, please contact us immediately.

Two-way pluggable: D-tap adopts a 3x4 port design, no matter from the front or the reverse direction, the device can be quickly plugged into the socket. | With extra 2 DC output (8V and 12V) for more camera monitors, led lights, and other DC devices. USB 5V-2.1A output can also supply power for cell phones or other devices. | Cable Length: 4.3inches (11cm), max stretched up to 39inches (100cm). | Plug A: D-tap Male Connector. Plug B: 4 Port D-tap Female Connector. Plug C: USB 5V/2.1A. Plug D: DC 8V. Plug E: DC 12V. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

This ultrashort D-tap splitter power cable is perfect for saving room during your shooting and avoiding too messy condition, which is convenient for your shooting. | With this PowerTap Receptacle, you can expand any Power Tap to accommodate up to four separate D-tap. Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery. | At the D-tap end of cable equips with a strain relief which is a standard fixture for electrical cables that functions as a feature for relieving the stress from the cable connections themselves to prevent them from breaking. | Plug A: D-tap Male Connector; Plug B: 4 Port D-tap Female Connector. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Power your RED Komodo-X. Epic, Scarlet, RED DSMC2, DSMC3, V-Raptor camera with battery with D-tap power output. This cable is not for RED Komodo and RED V-raptor XL. | Plug A: D-tap Male. | Plug B: Straight 1B 6 Pin (4+2) Female. | Cable Length:1m (about 39in) in stock. We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Power your Teradek Bond/ Teradek Bolt/ SmallHD Monitor from a PowerTap power source. | Plug A: Standard Male D-Tap | Plug B: 0B 2 Pin Male Right Angle Connector. | Cable Length: 45CM/18inches. We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

With this adapter cable, you can power NP-F550, NP-F570, NP-F970 Monitor from a V-mount battery with D-tap. This adapter is an upgraded version which can be used for Atomos Ninja V Monitor. | There is a 7.4v DC output which allows you to power other devices at the same time. | Input: 10V-24V; Output: 8V. Cable Length: 1.5M/59inches. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Plug A: NP-F550 Dummy Battery (upgraded). Plug B: D-tap Male. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Power Cinematography Electronics Cine Tape Measure control from v-mount battery or other power source with dtap output. | Plug A: D-tap Male connector. | Plug B: Fischer 3 Pin Male connector. | Cable Length: 45CM(18 inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

For Smallhd 702 touch monitor, Atomos Ninja V, Atomos Shogun, Lectrosonics venue VR IFB, Video Devices PIX-E7 PIX-E5 7 touchscreen display, Hollyland Mars 400s. | Plug A: D-tap Male. | Plug B: Right Angle Locking DC, be compatible with 2.1*5.5mm or 2.5*5.5mm. | Cable Length: 60CM. We can customize cables with other length, if you need custom cables, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Video Devices PIX-E7 7 touchscreen display power Cable Anton Bauer Power Tap D-Tap to 2.1*5.5mm lock DC, Hollyland Mars 400s. | Cable Length:21cm/Stretch 100cm. We can customize cables with other length, please send a message to us if you need. | Plug A: D-tap Male. | Plug B: Locking DC, be compatible with 5.5 *2.1mm and 5.5*2.5mm. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.