Power Adapter Cable for Sony NP-F550, NP-F570, NP-F970, Atomos Shinobi, Atomos Ninja V Monitor, SmallHD Focus 7 from a V-mount battery. | Input Voltage: 12V - 24V; Output Voltage: 8.2V (stabilized); Output Current: 4.5A (maximum). | Avoiding Reverse Insertion. Built-in microprocessor electronic control can identify automatically whether the plug inserts positively. | Plug A: NP-F550 Dummy Battery. Plug B: D-tap. Unstretched Length:40cm, Stretched Length: 80cm. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

This is for Teradek Bolt/ Teradek Bolt/ Teradek Ace 800/SmallHD 703 503/ Vaxis wireless(Please note:this one isn't for Bartech Focus Device Receiver,if you need the one for Bartech Focus Device Receiver,please visit my store or contact me, thanks!) | More flexible and thinner than normal cables. | Plug A: Standard Male D-Tap; Plug B: 2 Pin Male Connector. | Cable Length: 23.6 inches(60cm). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

This twisted GigE cable is used for data transmission and comes outfitted with two RJ45 plugs, one with horizontal screw-downs. | The cable is suitable for drag chain applications. | Cable Length: 5M. We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

75 Ohm 3G HD SDI Cable. | For Sony/ Blackmagic Camera, Aotmos Monitor. | Plug A: Right Angle BNC male; Plug B: Straight BNC male. | Cable Length: 30CM(12 inches). We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Min length: (14cm +12cm +12cm), (Max length: 50cm +12cm +12 cm) | Plug A: Right angle BNC male, Plug B: Right angle BNC male

This SDI Cable is a 75 ohm coaxial cable complete with two male BNC connectors designed to support the transfer of both RF and video signals, particularly HD quality video signals. The 18 AWG gauge cable is FPE insulated and constructed with high density OFC braided shielding to reject both EMI and RF interference. | Length: 100cm (custom length) | Resistance: 75Ω,Frequency: 0~2GHz | Shelter: double shelter, aluminium-foil paper+internal copper net | Connector type: BNC male to BNC male

For Basler GIGE AVT CCD Camera. | Plug A: Right angle hirose 6 pin female HR10A-7P-6S Connector C-type. | Plug B: Flying Lead. | Cable Length: 16.4ft/5M. We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

High Flex 6 Pin Hirose Female HR10A-7P-6S Cable for Basler GIGE AVT CCD Camera | Plug A: HR10A-7P-6S Hirose 6 Pin Female. | Plug B: Flying lead. | Cable Length: 10m (32.8ft). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

High Flex 6 Pin Hirose Female HR10A-7P-6S Cable for Basler GIGE AVT CCD Camera | Cable Length: 10M/32.8ft. We can customize cables with other length, please send a message to us before making the order. | Plug A: HR10A-7P-6S connector right angle C-Type | Plug B: Flying lead | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Fully compatible with Red Scarlet W DSMC 2. | Plug A: Right Angle 16 Pin Male; Plug B: Right Angle 16 Pin Male. | We offer one year warranty for defective units. | Cable Length:60CM end to end (about 24in) in stock. We can customize cables with other length, please contact us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

For Smallhd 702 touch monitor, Video Devices PIX-E7 PIX-E5 7 touchscreen display, Hollyland Mars 400s. | Plug A: D-tap Male. | Plug B: Locking DC 5.5x2.1mm. | Cable Length:15cm/Stretch 80cm. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

For Canon 5D4 5DSR 5D2 5D3 6D 60D R6 7D 7D2 70D 80D. Please note, it can't be used for Blackmagic camera, please don't use it for the others that we do not mention. This is dummy battery cable, not LP E6 real lithium battery , the appearance is different from the LP E6 real lithium battery, we could call it DR E6 dummy battery too, but it will work for the device we mentioned above (About the detail, welcome to contact us) | Cable length：Min length 12 inches, Max length 36 inches. | Please ensure that the output of the power source does not exceed 16.8V.The Output is about 8V. Please Note , this is the correct installation steps, it is good for your device and dummy battery cable: Firstly plug the D-Tap into the battery, then load the dummy battery into the battery compartment, and finally turn on your device. | Plug A: LP E6 Dummy Battery (DR E6); Plug B: D-tap. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

For Blackmagic Video Assist 5" 12G HDR. | Plug A: Original Right Angle Micro BNC High Density BNC. | Plug B: BNC Male. | Cable Length: 50CM|19 inches. We can customize cables with other length, if you need custom cables, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

For Sony A7R A7S A7II NEX Series Camera.For Sony A3000 A5000 A5100 A6000 A6300. | Plug A: Dummy Battery for Sony A7: Plug B: D-tap Male. | Sony NEX 3 series(Alpha NEX-3, Alpha NEX-3A, Alpha NEX-3C, Alpha NEX-3CA, Alpha NEX-3CD, Alpha NEX-3D, Alpha NEX-3CH, Alpha NEX-3H, Alpha NEX-3CK, Alpha NEX-3K) Sony NEX 5 series(Alpha NEX-5, Alpha NEX-5A, Alpha NEX-5C, Alpha NEX-5CA, Alpha NEX-5CD, Alpha NEX-5D, Alpha NEX-5H, Alpha NEX-5CH, Alpha NEX-5K) Sony NEX 7 series Sony DSC-RX10, DSCRX10/B, WW808143，DSC-RX10 II ， DSC-RX10 III Sony A7(Alpha a7, a7R, ILCE7/B, ILCE7K/B, ILCE7R/B, ILCE-7, ILCE-7R) Sony A7R Sony A7S Sony A7II. | Spring Length: 12 inches, Stretchable Length: 36 inches. | Every item will be sold until they were tested and turned out to be no short circuit, no latent breakdown problems. If the cable you received is defective, please contact us immediately.

With this adapter cable, you can power NP-F550, NP-F570, NP-F970 Monitor from a V-mount battery with D-tap. This adapter is an upgraded version which can be used for Atomos Ninja V Monitor. | Input: 10V-24V; Output: 8V. | Cable Length: Min length is 15 inches, Max length is 43 inches. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Plug A: NP-F550 Dummy Battery (upgraded). Plug B: D-tap Male. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Power Adapter Cable for Sony NP-F550, NP-F570, NP-F970 Monitor, Atomos Shinobi, Atomos Ninja Monitor, SmallHD Focus 7 from a V-mount battery d-tap | Input Voltage: 12V - 24V; Output Voltage: 8.2V (stabilized); Output Current: 4.5A (maximum). | Avoiding Reverse Insertion. Built-in microprocessor electronic control can identify automatically whether the plug inserts positively. | Plug A: NP-F550 Dummy Battery. Plug B: D-tap. Cable Length: 86cm. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

Power Adapter Cable for Sony A7III A7RIII A7SIII A9 ILCE-9 FX3 A7C A7IV Camera. | Work with Sony battery and v-mount battery with D-tap output. | Cable Length：Min length is 30cm, Max length is 90cm. | Input:10V-20V; Output: 7.6V/2A. | Plug A: NP-FZ100 Dummy Battery; Plug B: D-tap.

Power Adapter Cable for Sony A7III A7RIII A7SIII A9 ILCE-9 FX3 Camera. | Work with Sony battery and Anton battery with D-tap output. | Cable Length：1M, We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Input:10V-20V; Output: 7.6V/2A. | Plug A: NP-FZ100 Dummy Battery; Plug B: D-tap.

Power Cable for Tilta Nucleus M from Steadicam Rigs or Arri RED Camera 2 Pin | Cable Length: 27.6 Inches (70CM).We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Plug A: 2 Pin Male. Plug B: Nucleus 7 Pin Male. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. | Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Power your Odyssey 7 or 7Q+ Monitor. | Plug A: D-tap Male Connector.Plug B: Original NSC3F 3pin Female Connector. | Cable Length (Spring Length): 0.2 meter in stock. We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us. | Please contact us if the cable doesn't work. We will solve the problems properly or send you a new replacement at once.

This 4 Pin Female to Dtap Power Cable for Portkeys BM5 / BM7 Monitor. | Plug A: Right Angle 4 Pin Female. | Plug B: Dtap Male. | Cable length: 15.75 inches (About 40cm).Custom Length: other length of the cables, we could customize with it, please contact us. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

Female D-Tap P-Tap Connector Plug for DSLR Power Gold Mount V Mount Battery, LED Light, HD Monitor or other devoice. (You can use this adapter and your lemo 2pin to D-tap male cable to power Z CAM E2 K2/ ARRI/ RED Camera/ Teradek Cube/ Hollyland Cosmo 600, if you want to use it to other device, please contact us to confirm first ) | We only use highly reliable and safe chips in our adapters to protect your devices, insteading of using low-quality chips to reduce costs. | With 4 plugs (UK, US, EU, AU), you can change it easily by yourself. | Cable Length: 79 inches (2 meters). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

This rotatable right angle 2 pin to AC Adapter Cable is for use with the Hollyland RX, Hollyland TX ,Teradek Cube, Bolt, Bond, Link and Z CAM E2 Flagship (E2-F6, E2-S6, E2-F8), if you want to use it for other devices, please contact us to confirm first. | We only use highly reliable and safe chips in our adapters to protect your devices, insteading of using low-quality chips to reduce costs. | With 4 plugs (US, UK, EU, AU), you can change it easily by yourself. | Cable Length: 79 inches| 2meter. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Power Cable for Blackmagic pocket cinema camera 4k | This cable works with 12V Anton Bauer Gold Plates, V-mount Plates, DC 5.5X2.5MM outputs, NP-F970 12V battery plate. Works for: BMPCC4K BMPCC 4K Blackmagic Pocket Cinema Camera 4K | Cable length：Min length 15.7 inches,Max length 39 inches | The 2 pin connector is a push-pull self-locking connector. It will automatically lock when inserted into the camera. It is impossible to pop off. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector.

Plug A: Standard Male D-Tap. | Plug B: 2 Pin 0B Male Connector. | Spring Length: 12 inches. Stretchable Length: 36 inches. We can customize cables with other length, please send message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

Connects 4 pin to the sync port of RED camera/ DSMC2 Jetpack Expander/ DSMC2 Jetpack-SDI Expander/ DSMC2 V-Lock IO Expander. | Provides trigger/timecode/genlock in functionality via camera sync port. | Plug A: Straight 00B 4 Pin Male. Plug B: Three BNC connectors (Black BNC: For Start/Stop Trigger; Yellow BNC: For Timecode; Green BNC: For Genlock). | Cable Length: 60cm (23.6inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement. | This cable allows users to power their RED Epic/Weapon/Scarlet from the MōVI Pro’s camera power port. | Cable Length: 25cm（about 9.84 inches), The cable features a custom thin and flexible cable with high quality connectors. | Users will enjoy the convenience of unlimited up-time with this setup by utilizing the battery hot-swap capabilities of the MōVI Pro. | The MōVI Pro will power a fully rigged RED setup for ~1 hour.

Power your Red Komodo-X/ Scarlet/ Epic Camera with battery that with D-tap power output plug. | Plug A: D-tap Male. | Plug B: Straight 1B 6 Pin (4+2) Female. | Cable Length:50cm (about 20in) in stock. We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Power your RED Komodo-x, RED DSMC2, Red Scarlet & Epic camera with battery that with D-tap power output plug. | Reminder: This cable is not compatible for RED Komodo and RED V-vaptor XL. | Plug A: Standard D-Tap Male; Plug B: Right Angle 1B 6 Pin Female. | Cable Length: 1M/39.4in. We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Fully compatible with Red EVF and touchscreen LCD. | Works with Red Epic, Red Scarlet, and Red One cameras. | Plug A: Right Angle 16 Pin Male; Plug B: Straight 16 Pin Male. | Cable Length:19.7in (about 50cm) in stock. We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us. | Power your Red Scarlet & Epic camera with battery that with D-tap power output plug. | Cable Length: 27.5 inches, Stretchable Length: 51 inches. We can customize cables with other length, please send a message to us if you need. | Plug A: Standard male D-Tap. | Plug B: Right Angle Female 6pin 1B.

It will power Smallhd monitors, teradek from 2 pin output on Red-Komodo V-Mount battery plate. | Plug A: Alvin's Rotatable right angle 2-pin male connector. | Plug B: Alvin's Rotatable right angle 2-pin male connector. | Cable Length: 18 inches (45cm). We can customize the cable length to meet your requirements. Note: If you need other length cable, please send us a message before placing order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Work for Teradek Bond/ SmallHD Monitor. | Plug A: Standard male D-Tap. | Plug B: Right Angle 2 pin 0B male connector. | Cable Length: 12 inches; Stretchable Length: 36 inches. | Every item will be sold until they were tested and turned out to be no short circuit, no latent breakdown problems. If the cable you received is defective, please contact us immediately.

For SmallHD 702 monitor, Atomos Ninja V, Atomos Shogun, Lectrosonics venue VR IFB, Video Devices PIX-E7 PIX-E5 7 touchscreen display, Hollyland Mars 400s. | Plug A: Right Angle DC Male. | Plug B: Right Angle Locking DC, be compatible with 5.5*2.1mm or 5.5*2.5mm. | Cable Length: 45cm(17.7inches). We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Super flexible and thin 3G HD SDI Cable, 75 Ohm RG179 | For Sony FS5/FS7/FX6, Atomos Ninja/Shogun Inferno monitor, Blackmagic Ursa Mini Pro. | Connector type: Right angle BNC male to Right angle BNC male. | Cable Length: 30CM(About 12 inches) . We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

To feed timecode signal from a Tentacle Sync or Deity TC-1 to cameras and devices (for Canon C70/C300 MK II/ C300 MK III/ C500, Sony F55/ FX9/ FX6 cameras, Zaxcom, Zoom F4/ F8/ F8n/ F8n Pro, Sound Devices, Blackmagic Ursa Mini, JVC broadcast cameras, for Panasonic broadcast cameras.) | Bi-Directional Timecode Cable, also feeds timecode out from BNC to 3.5mm TRS | Plug A: Right angle 3.5mm TRS. Plug B: Right angle BNC. | Cable Length:50cm (about 20 inches) in stock. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

This cable is with special custom design right angle 5 pin connector, which can be rotated at any 90 degrees directions (Default 12 o'clock up direction). | Cable to feed timecode from Tentacle Sync 3.5mm to ARRI Alexa or Sound Devices Recorder that uses a standard 5pin connector. | You need this cable if you want jam-sync Tentacle into devices like ARRI Alexa or Sound Devices 702T / 744T / 788T / 664 / 633 or others that using a 5pin connector (If you need the other cable that from ARRI Alexa or Sound Devices Recorder into Tentacle Sync, please contact me or visit my store. ) | Plug A:High quality special rotatable 5 pin connector. Plug B:High quality right angle 3.5mm mini-TRS jack. | Cable Length:18 inches (45 cm) length. We can customize other length, please send a message to us if you need.

This cable feeds timecode from Tentacle Sync to ARRI Alexa or Sound Devices Recorder that uses a standard 5pin connector. | You need this cable if you want jam-sync Tentacle into devices like ARRI Alexa or Sound Devices 702T / 744T / 788T / 664 / 633 or others that using a 5pin connector (If you need the other cable that from ARRI Alexa or Sound Devices Recorder into Tentacle Sync, please contact me or visit my store. ) | Plug A:High quality right angle 3.5mm mini-TRS jack | Plug B:High quality 5-pin connector | Cable Length:45CM, We can customize cables with other length, please send a message to us if you need.

This bidirectional timecode cable is designed to feed timecode from Tentacle Sync timecode generator to Canon EOS R5C camera, or feed timecode from Atomos UltraSync ONE to devices which has a 3.5mm TRS input. | The cable is more flexible and thinner. | Plug A: Straight DIN 1.0/2.3 Male. Plug B: Right Angle 3.5mm TRS Jack. | Cable Length: 30cm(12inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

More flexible than normal cables. | Power Teradek Bond via ARRI Alexa Camera. | Plug A: Right Angle 2 Pin Male Connector; Plug B: 2 Pin Male Connector. | Cable Length: 19.7inches (50cm). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.