This 2-Pin to AC Adapter Cable from Teradek is a 2 meters power cable designed for using with the Z Cam E2 S6 F6 F8, Teradek Cube, Bolt, Bond, Link, Hollyland Cosmo 600 and Z CAM E2 Flagship ( E2-F6, E2-S6, E2-F8 ). | We only use highly reliable and safe chips in our adapters to protect your devices, insteading of using low-quality chips to reduce costs.The adapter quality is better than the Standard. | With 4 plugs ( US, UK, EU, AU ), you can change it easily by yourself. Right angle 2 pin on the other side. | Cable Length: 79 inches (2 meters). Please Note, we have extended the length from 1.2 meters to more than 2 meters, the length is long enough now.We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

TIME CODE cable for your Red. | Plug A: 00 4pin Male Connector. | Plug B: BNC Connector. | Cable Length:50cm in stock. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

For Canon R5C to connect Deity TC-1 Timecode Cable. | The DIN connector is longer than normal version and of higher quality, which is specially for Canon R5C camera and easier to pull out. | Plug A: Straight DIN male; Plug B: Lock Right Angle 3.5mm TRS. | Cable Length: 30cm (12 inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Feed timecode for Canon EOS R5C camera from Deity timecode box or Tentacle Sync Timecode Generator. | Plug A: Straight Lock 3.5mm TRS | Plug B: Right angle DIN 1.0/2.3 mini BNC | Cable Length: 30cm(12inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Cable to feed timecode from Tentacle Sync to ARRI Alexa or Sound Devices Recorder that uses a standard 5pin connector. | You need this cable if you want jam-sync Tentacle into devices like ARRI Alexa or Sound Devices 702T / 744T / 788T / 664 / 633 or others that using a LEMO 5pin connector (If you need the other cable that from ARRI Alexa or Sound Devices Recorder into Tentacle Sync, please contact us or seach in my store. ) | Plug A: High quality L shape Neutrik 3.5mm mini TRS ; Plug B:High quality 5 pin male connector. | Cable Length:50cm (19.7 in). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

The twisted cable serves for power supply and control. It features a Right Angle Hirose 6pin (HR 10A-7P-6S) plug on one end, and is available in 1~10 meter variants. | Cable Length: 33 feet (10 meters). We can customize cables with other length, if you need custom cables, please send a message to us before making the order | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. | Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us. | The Alexa Mini's 5-pin 00 Series jack on the camera body to allow direct connection to microphones, lav packs, and other audio equipment.Works with ALEXA MINI Camera. | Cable Length:70cm (about 27.6in) in stock (Better than before). We can customize cables with other length, please send a message to us if you need. | Plug A: Two XLR 3pin Female. | Plug B: Right Angle 5pin Male.

This Regulated USB C to Dtap Cable allows you to power Blackmagic Design Micro Converter, Sound Devices Mix Pre-3 II, Sound Devices Mix Pre-6 II from V-mount battery or other devices with dtap output. | This cable also works for other 5V device with USB-C Type-C connector, such as Mobile Smart phones, laptops, LED lights, Monitor and so on. | Power output: Regulated 5V/2A. Built-in DC-DC current electronic stabilizer to protect your device, providing safe and stable connection. | Plug A: Right Angle USB-C Type-C Connector; Plug B: D-tap Male Connector. | Cable Length: 12inches (30cm). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order.

The xlr 4 pin male to D-tap female conversion cable is used to convert xlr 4 pin female output port of the battery to D tap output port, which makes charging more convenient. | Plug A: XLR 4 pin male. | Plug B: Standard D-tap female. | Cable Length: 1M/39.4inches. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Power cable for the Z Cam E2 Flagship (E2-S6,E2-F6,E2-F8, not original E2) from Nitze plate power output. | Plug A: Straight 2 Pin male; Plug B: Right angle DC male | Cable Length: 3 inch (about 7.6cm) . | Custom Length: we can customize the cable, please contact us first if you need custom length cable. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

This is for the Z Cam E2 S6/F6 Cameras and you can use a V Mount to power it up. Right angle 2 pin male connector on one end, with AlvinTap on the one end. | AlvinTap (Protective DTap): It can prevent your device from short circuits caused by reverse insertion or using an incompatible cable, which will avoid damaging your device. Built-in microprocessor electronic control can identify automatically whether the plug inserts positively. When D-tap is inserted correctly, green light is always on, which means power on. When reverse insertion, power will be cut and the red light will flicker. | Cable Length:12 inches (About 30cm).Custom Length: other length of the cables, we can customize with it, please contact us. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. | Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Works with Z CAM E2 Camera. For the K2 Pro prototype. | Stand alone, compact cable. Less bulky than OEM cable, but does not support daisy chaining. Supports sync for exactly two E2 cameras. | Plug A: Right Angle 10 Pin Male. Plug B: Right Angle10 Pin Male. | Cable Length: 26cm (10.24inches). We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

When equipped with heavy lenses, this counterweight can be used to adjust the balance on the tilt axis. | Compatible with DJI Ronin 4D, DJI Zenmuse X9-6K, DJI Zenmuse X9-8K. | Package included: 1 x Gimbal Counterweight; 4 x Countersunk Screw; 1 x 2mm Ball-End Hex Key. | Weight: 320g. | Our aim is to be safer and more professional. We will do our best to provide you with good pre-sales and after-sales service.

【Data Rate】 1.25Gb/s；Up to 100m via CAT.5e cable | 【Low Power Consumption】 Low Power Consumption <2.5W, Hot Plug, Anti Electro-Static Discharge and Radiation Resistant | 【Interface】 RJ-45. Compliant with IEEE 802.3ab, SFP MSA | 【Technical Support】 3-year Warranty, 30-Day Free-return, Free Lifelong Technical Support | 【Compatibility】 Compatible with Cisco and all major generic switches: Ubiquiti, Meraki, Mikrotik, Cumulus, Netgear, D-Link, Acction, Edgecor, F5, Linkysys, Supermicro, TP-Link, Zyxel etc.

Compatible with Beats Studio Buds | Made of High Quality Silicone Materials | Sound Isolating Design Reduces Ambient Noise for High-intensity Listening | Package Includes: 3 Pairs Earhook tips & 1 Pcs Fiber Cleaning Cloth with "ALXCD" Logo

Applicable Model: Sennheiser Momentum In-Ear Earbud | High quality silicone earbuds, sound isolating design reduces ambient noise for high-intensity listening | Re-usable, can wash with water | Package: 8 Pair Earbud Tips & 1 Pcs Fiber Cleaning Cloth with "ALXCD" Logo | Fulfilled by Amazon, Fast Shipping and Great Service

Applicable Model: Air Pods Pro Wireless Headset MWP22AM/A | Perfect Fit Dsign Locks to Headphones Just Like the OEM Tips | Perfect Fit in Chargeing Case No Need to Take Off the Eartips Again and Again when Charging | Mada of High Quality Soft Silicon Material Ultra Comfortable | Package: 3 Pairs Silicon Eartips & 1 Pcs Fiber Cleaning Cloth with "ALXCD" Logo

Applicable Model: Plantronics M155 M165 M1100 M100 M55 M28 M25 Voyager Edge | High quality silicone earbuds, sound isolating design reduces ambient noise for high-intensity listening | Re-usable, can wash with water | Package: 3 pcs small silicone eargel & 3 pcs medium silicone eargel & 3 pcs large silicone eargel & 6 pcs ear hook & 1 Pcs Fiber Cleaning Cloth with "ALXCD" Logo | Fulfilled by Amazon, Fast Shipping

Connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.5"/3.5" IDE/SATA hard drives and IDE/SATA CD/DVD drives. Win 10& Mac OS system is not compatible with DVD drives | One-Touch Backup (OTB) function. On/Off Switch for HDD protection. Hot-swappable with Super-Speed USB 3.0 interface. Plug and play without rebooting. OTB not compatible with Linux and Mac OS | SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downward compatible with USB 2.0(high-speed 480 Mbps) / USB 1.1(full-speed 12 Mbps) standards. The actual transmission speed subjects to the setting of the device connected | Support 1 IDE hard drive and 1 SATA hard drive connecting simultaneously, not compatible with two IDE hard drives simultaneously | Plug and Play, no driver needed, if your computer is pop up that driver install needed when connecting, that means computer OS lacks'' USB mass storage drive'', please ensure your device have install ''USB mass storage drive'' before using

Alxum SATA IDE to USB Adapter can connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with any 2.5"/3.5" SATA SSD HDD, IDE HDD (40pin and 44pin), DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. (Support capacity of SATA hard drive up to 18TB) | Unique One-Touch Backup (OTB) Function. Allow you realize data back via one-touch operation. Easy transfer data between three hard drives. Plug and Play, Hot-swappable. On/Off Switch for HDD protection. LED light shows power and activity status. (Note: OTB not compatible with Linux and Mac OS) | SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downward compatible with USB 2.0 (high-speed 480 Mbps) / USB 1.1 (full-speed 12 Mbps) standards. (The actual transmission speed subjects to the device connected) | Alxum SATA and IDE Hard Drive Dock support 2 IDE hard drive and 1 SATA hard drive connecting simultaneously, compatible with two IDE hard drives simultaneously (we Provide a 4pin power cable for 3.5" IDE drive) | Broad Compatibility of Operate Systems: Support Windows XP/Vista/7/ 8/8.1/10, Mac OS 10 or higher, Linux. We offer: SATA/IDE Hard Drive Cable, 12V 2A Power Adapter, 4PIN Power Cable, User's Manual, 2-year warranty, 24h friendly customer service.

【Bidirectional USB C Switch Selector】With Alxum 2 in 1 out/2 in 1 out USB C switch, you can easily share one display between two USB-C video sources or share one source between two displays. such as laptops, tablets, mobile phones, game consoles and other full-function USB C devices. NOTE: Two displays CANNOT display simultaneously. | 【100W Fast Charging & 10Gbps Data Transmission】USB Type C switch supports a maximum transfer speed of 10Gbps (USB3.1 Gen2) to transfer music, movies or an entire season of TV shows in seconds. Also it can be charged while working, compatible with fast charging up to 100W. Note: The monitor, data cable and device you use should support fast charging, and the monitor needs to support reverse charging. | 【High Resolution up to 8K@60Hz】You can benefit from up to 8K@60Hz 4K@120Hz 1080P@165Hz video output via our bi-directional switch to your USB-C Displays, delivering more exquisite and realistic images and video color is more bright and moving. | 【Alxum‘s Advantage】LED indicate light can make it clearer to know which device is working; One-click button can easily to switch the device you need; Alxum provides 2 years warranty, if you have any product questions during the purchase process please feel free to contact us. | 【Great Compatibility & Driver-Free】This USB C switcher supports Windows 11/10/8.1/8/7/Vista/XP, Mac OS, and Linux systems. Just plug and play, driver-free. This bidirectional USB C switch selector is also widely applied for Enterprise, Office, Multimedia Teaching, Meeting Rooms, Gaming Rooms, Research Tests, etc. | 【Kind Reminder】Alxum provides 1 x Alxum USB C Switcher, 2 x USB C to C Cable 1m, 1 x USB A to C Cable 1m, 1 x User Manual. Note:Please MUST connect the DC5.0V power port and then connect the devices you need, which will make it more stable and efficiency.

This cable replaces Olympus CB-USB5, CB-USB6 and CB-USB8 camera cables. This is NOT compatible with all Olympus cameras. Please check compatibility list below before buying. Please contact ienza if you have any questions. This cable is also known as: Olympus Stylus Tough Charger. This cable connects your digital camera to USB-ready computer, USB hub or photo printer dock for pictures transferring. | This cable connects your digital camera to USB-ready computer, USB hub or photo printer/dock for pictures transferring. | Compatible with: Olympus Stylus Tough TG-620 iHS, TG-630 iHS , TG-830 iHS, TG-850, TG-860, TG-870, Stylus 5010, 7030, 7040, DZ-105, SH-1, SH-2, SH-21, SH-50, SH-60, SZ-16, SZ-17, TG-1, TG-3, TG-4, TG-310, TG-320, TG-610, TG-620, TG-630, TG-805, TG-810, TG-820, TG-835, TG-850, TG-860, X-940, X-960, XZ-1, XZ-2, XZ-10 Digital Cameras | Also compatible with: Olympus FE-4020, FE-4030, FE-4040, FE-5030, Mju 7040, Mju 7050, Mju 9010, Tough 3000, 6020, 8010, SP-100, SP-100EE, SP-620UZ, SP-720UZ, SP-800UZ, SP-810UZ, SZ-10, SZ-11, SZ-12, SZ-14, SZ-20, SZ-30MR, SZ-31MR. Also compatible with OM-D E-M1, OM-D E-M10 Mark II, OM-D E-M5 Mark II, PEN E-PL7, PEN E-PL8. | Replacement: Olympus Tough TG-860 TG-870 USB Cable USB Data SYNC-Charge Charging Cable Cord for Olympus Stylus Tough TG 860 TG 870 Camera. Works with Olympus model C170, C180, C480, C500 Zoom, C5500, C7000, C-170, C-180, C-480, C-500 Zoom, C-5500 SportZoom, C-7000. Also known as: Camera cord to computer Olympus Stylus Tough Charger, USB Cable For Image Transfer Supports Charging in Selected models Olympus CB-USB5 CB-USB6 USB Cable Cord Lead. | Not Compatible with All Olympus Cameras, See List Below Before Buying | 100% satisfaction guarantee,1-year warranty.If you have ant problem,please contact us ar time. | Package inclue: 1 pcs USB Camera Data Cable, 24h coustoms serive.

Compatible with for Mini USB Cable Compatiable with all Mini USB 8-Din device like Nikon D5000 D5100 D7100 D7200 D3200 D3300, Coolpix 2100、2200、3100、3200、3700、4100, L1、L2、L3、L4、L6、L10,etc and other devices with Mini 8 Din connector | Compatible with Nikon Coolpix P100, P300, P310, P330, P500, P510, P520, S01, S02, S70, S80, S100, S640, S800C, S1200pj, S2500, S2550, S2600, S2700, S3000, S3100, S3200, S3300, S3400, S3500, S3600, S4000, S4100, S4150, S4200, S4300, S5100, S5200, S6000, S6100, S6150, S6200, S6300, S6400, S6500, S6600, S6800, S8000, S8100, S8200,S9050, S9100, S9200, S9300, S9400, S9500 Digital Camera | Compatible with Sony Alpha D-SLR / DSLR A70, A100, A200, A300, A350, A450, A700, A850, A900, Cybershot DSC-S650, DSC-S700, DSC-S730, DSC-S750, DSC-S780, DSC-S800, DSC-S950, DSC-S2000, DSC-S2100, DSC-TF1, DSC-W180, DSC-W190, DSC-W310, DSC-W320, DSC-W330, DSC-W370, DSC-W520, DSC-W530, DSC-W550, DSC-W610, DSC-W620, DSC-W630, DSC-W650, DSC-W670, DSC-W690, DSC-W710, DSC-W730, DSC-W800, DSC-W810, DSC-W830 Cyber-shot Digital Cameras etc | Easy to use. Supports USB 2.0, 1.1 and 1.0; Data transfer rates up to 480 Mbps.For USB Image Transfer/Battery Charging Via USBand maximum data transfer speeds,This cable connects your digital camera to USB-ready computer, USB hub or photo printer/dock for pictures transferring. | 2 in1 Data Sync Charging cable not only stable charging, but also stable data transmission. You also could use it for anywhere.Such as Connect with your PC/Laptop by USB port.

Brand New High Quality USB 2.0 Camera Data Transfer Cable/Lead. | This Cable is used to Replacement Nikon Camera UC-E16 E17 E23 Cable Photo Transfer Cord,or download images from your camera using the USB port on your computer. Mac and PC compatible. | Compatible:Nikon L840 L830 L820 L810 L340 L26 L28 L620 L110 L120 L310 camera usb cable | COMPATIBLE WITH: Nikon Digital SLR DSLR D3200, D3300, D5000, D5100, D5200, D5300, D5500, D7100, D7200, D750, Df; Nikon 1 S2 1S2, 1 V1 1V1; Coolpix P100, P330, P500, P510, P520, P530, P6000, P7000, P7100, P7800, P90 | 100% satisfaction guarantee,1-year warranty.

USB PC Charger Data Cable/Cord/Lead For Panasonic CAMERA Lumix DMC-ZS25 DMC-TZ35 | Compatible with: Lumix DMC-F2, DMC-FH25, DMC-FH4, DMC-FH5, DMC-FH6, DMC-FH7, DMC-FH8, DMC-FP5, DMC-FP7, DMC-FP8, DMC-FS12, DMC-FS14, DMC-FS16, DMC-FS18, DMC-FS20, DMC-FS22, DMC-FS25, DMC-FS28. | Compatible with: Panasonic Lumix DMC-FS3, DMC-FS30, DMC-FS33, DMC-FS35, DMC-FS37, DMC-FS40, DMC-FS41, DMC-FS45, DMC-FS5, DMC-FS62, DMC-FS7, DMC-FT20, DMC-FT25, DMC-FT3, DMC-FT5, DMC-FX01, DMC-FX07, DMC-FX10, DMC-FX100, DMC-FX12, DMC-FX150, DMC-FX2, DMC-FX3, DMC-FX30, DMC-FX33, DMC-FX35, DMC-FX37, DMC-FX40, DMC-FX48, DMC-FX50, DMC-FX500, DMC-FX55, DMC-FX550, DMC-FX580, DMC-FX60, DMC-FX65, DMC-FX66, DMC-FX7, DMC-FX700, DMC-FX77, DMC-FX78. | Also compatible with: Panasonic Lumix DMC-FX8, DMC-FX80, DMC-FX9, DMC-FX90, DMC-FZ1, DMC-FZ10, DMC-FZ15, DMC-FZ150, DMC-FZ18, DMC-FZ2, DMC-FZ20, DMC-FZ200, DMC-FZ28, DMC-FZ3, DMC-FZ4, DMC-FZ47, DMC-FZ48, DMC-FZ5, DMC-FZ50, DMC-FZ60, DMC-FZ62, DMC-FZ7, DMC-FZ70, DMC-FZ72, DMC-G1, DMC-G10, DMC-G2, DMC-G3, DMC-G5, DMC-G6, DMC-GF1, DMC-GF3, DMC-GH3, DMC-GH4, DMC-GM1, DMC-GX1, DMC-GX7. | Also compatible with: Panasonic Lumix DMC-L10, DMC-LS1, DMC-LS2, DMC-LS3, DMC-LS6, DMC-LS70, DMC-LS75, DMC-LS80, DMC-LS85, DMC-LX1, DMC-LX2, DMC-LX3, DMC-LX5, DMC-LX7, DMC-LZ1, DMC-LZ10, DMC-LZ2, DMC-LZ3, DMC-LZ30, DMC-LZ4, DMC-LZ40, DMC-LZ5, DMC-LZ6, DMC-LZ7, DMC-LZ8, DMC-S1, DMC-S2, DMC-S3, DMC-S5, DMC-SZ02, DMC-SZ1, DMC-SZ5, DMC-SZ7, DMC-SZ8, DMC-SZ9, DMC-TS20, DMC-TS3, DMC-TZ1, DMC-TZ2, DMC-TZ3, DMC-TZ4, DMC-TZ5

40Gbps Data Transfer - The 2.3ft/0.7m short USB C Thunderbolt 3 cable supports data transfer speed up to 40 Gbps, 8x faster than Type C 3.0 cables (⚠️The data transfer speed will still depend on the equipment used) | Single 5K or Dual 4K - The USB C Thunderbolt 3 cable supports Single 5K(60Hz) display or DUAL 4K(60Hz)displays simultaneously for the enjoyment of Ultra HD video resolution (⚠️dual-monitor display requires 2 cables) | 100W/5A Charging - The USB C to USB C Thunderbolt 3 cable can reach up to 100W/20V/5A charging compatibility. It can provide fast charging for Laptops/PC/iPad and fast charging for mobile phones with USB C ports | Wide Compatibility - Works with all your Thunderbolt 3/4 enabled devices like Storage Devices, Camera, Medical Equipment, Phone, Game Console, Ethernet adapter, USB hub, Docking Station, eGPU. It is fully USB-C compatible, and also backward compatible with thunderbolt 4/3, USB 4.0, USB C 3.2, 3.1, 2.0, etc | 100% Satisfaction Service - You will get a black 2.3ft/0.7m thunderbolt 3 cable. Please feel free to contact us if you need help or have any questions⚠️The length of cable is 0.7m, please double check your need before you buy it

ALYYDBG ethernet splitter 1 to 2 for insufficient network interface, 2 devices are connected to one network cable through lan splitter. Reduce cable clutter, keep the room tidy and optimise the use of network resources(2nd picture for using case) | 【Outstanding Capacity】 New high speed 1000Mbps internet splitter is much faster than 100Mbps, ideal for transferring large amount of data quickly and efficiently. Chipset maximum speed for 1000Mbps and actual speed is also affected by connected device | 【Wide Compatibility】 RJ45 8P8C LAN Internet Splitter uses Cat8 Cat7 Cat6 Cat5 Cat5e network Ethernet cable, works with ADSL, hubs, switches, TVs, set-top boxes, routers, wireless devices, computers, etc | 【Our Sincerity】Besides manufacturer QC inspections, ALYYDBG routinely inspects each batch to ensure reliable product quality. Any problems, directly return offered or contact ALYYDBG for more hassle-free service | 【NOTE】Package includes Cat Splitter mainbody, USB A-C charging cable(80cm/2.6FT), user manual. Not working without power cable plugged in

Ethernet Splitter 1 In 3 Out: ALYYDBG internet splitter splits one signal into three signal with high speed transmission up to 1000Mbps. Powered by included USB A-C cable. Perfect for insufficient network interface, reduce cable clutter, keep room tidy and optimise the use of network resources | Gigabit Transmission Speed: New ethernet switch support up to 1000Mbps, with no crosstalk between the three sets of signals, and back compatible with 100Mbps/10Mbps, ideal for gaming, business use. Note: actual speed will be affected by connected device | Stable And Reliable: RJ45 8P8C LAN internet splitter with gold plated pin core, heat-resistant PCB board built-in, heat-dissipative aluminium alloy shell, ensuring no signal crosstalk and stable transmission. Besides factory QC inspections, ALYYDBG routinely inspects each batch to ensure reliable product | Widely Compatible: Plug and play, simple with no drivers required. Ethernet splitter uses Cat8 Cat7 Cat6 Cat5 Cat5e network cable, works with RJ45 port devices like ADSL, hubs, switches, TVs, set-top boxes, routers, wireless devices, computers, PS5 | Compact And Lightweight: Not taking up your desktop space, any corner will be ok. Mini size is portable and can be easily carried | Package includes lan splitter 1 to 3, USB A-C cable(80cm/2.6FT), user manual. Plz make sure power cable connected for using(plug chrging advised)

【Latest Thunderbolt 3.0 Cable】-This thunderbolt 3 male to thunderbolt 3 male cable (USB-C to USB-C compatible) meets the highest standards of the latest Thunderbolt 3.0 technology, an ideal choice for a superfast connection to hard drives, ultra HD displays, docking stations, and other Thunderbolt peripherals or USB C enabled devices | 【Single 5K/Dual 4K】-These premium quality Thunderbolt 3 USB C cables support driving dual 4K(@60Hz)displays simultaneously, or one 5K(@60Hz) display for the enjoyment of Ultra HD video resolution | 【40Gbps/100W】-The USB C Thunderbolt 3.0 cable supports data transfer speeds up to 40 Gbps, 8x faster than Type C 3.0 cables. It delivers speeds up to 10 Gbps for USB 3.1 devices, up to 5 Gbps for USB 3.0 and 480Mbps for USB 2.0, and its rapid power delivery up to 100 watts (5A/20V) | 【Wide Compatibility】-This plug-and-play Thunderbolt 3 cable works flawlessly with all your Thunderbolt 3-enabled devices like Ethernet adapter, USB hub, Docking Station, eGPU. It is fully USB-C compatible, and also backward compatible with USB4, USB 3.1 Gen 1, 3.1 Gen 2, USB 2.0 | 【100% QC Tested & Lifetime Warranty】 Every single Thunderbolt 3 cable (USB C compatible) from ALYYDBG is 100% tested after the factory's normal QC process. We provide hassle-free 1-year warranty and lifetime technical support

Easy to set up and use. | Made in Oregon and out of rugged metal for scratch resistance and durablitiy. | Expandable. Additional displays may be daisy chained using Cat-5 cable (sold seperately).

Ideal for switching cameras | Is included with the ALZO Flip Flash Bracket

Sturdy aluminum construction with slide-out prevention pin and non-rotate rubber base that protects camera finish | Ideal for BMPCC-4K Blackmagic Cinema and Pocket Cinema cameras; also mounts to all DSLR rigs and camera cages | Flush 1/4 x 20 screw mount; mounts to any 1/4 x 20 thread hole | Can support devices up to 10 pounds

1 yard of pre-cut DYI diffusion fabric; IMPORTANT: selecting a quantity higher than 1 will get you multiple 1-YARD PRE-CUT pieces; if you need longer continuous fabric in one piece, search for ALZO Diffusion Fabric by the Yard. | Non-yellowing white translucent silk-like diffusion textile; inexpensive light modifier | Light reduction is about 1.5 f-stops | Fabric is 60 inches wide and 36 inches long and it is not finished on all 4 sides | Also available as pre-cut 2 yard and longer length by the yard; we use this fabric for our softboxes, tents and diffusion panels

Versatile 16 inch height extension for ALZO Ceiling Mounts | 16mm (5/8inch) diameter rod - 40.6cm (16inches) long | Includes male and female 1/4 x 20 threaded ends | Maximum axial load 5 kilos (11Lbs) | Available in Black and White

Versatile 16 inch height extension for ALZO Ceiling Mounts | Available in White and Black | 16mm (5/8inch) diameter rod - 40.6cm (16inches) long | Maximum axial load 5 kilos (11Lbs)

Camera Shoe connector includes positive latch mechanism | Flash Shoe mount includes lock thumb screw | Flash Shoe mount base is metal not plastic | 40" Coiled Cable stretches from 8" to 40"

Connects devices with female tripod screw thread to camera or bracket | All metal with steel screw | Large 1 inch diameter thumb wheel device lock | Length is 1.3 inches

Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors | Easy to install on a suspended drop ceiling with a 1-inch wide T-Bar frame, with 25 degrees pitch; projector drop from the ceiling is 10 inches, and accessory 8-inch extension rods can be added to lower the projector. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install | Includes an AMERICAN WRITTEN installation manual with illustrations and photos | Includes scissor clamp and one 8 inch aluminum suspension rod, and screws; maximum spider mount leg span is 12 inches, mount hole to mount hole | Projector is not included; it is shown for demonstration purposes only

Lightweight aluminum construction; adjustable rubber-lined metal band firmly grips zoom or focus lens rings | Works like a follow focus; end wheel finger grip makes very smooth lens moves | 4.5 inches handle length; fits lens rings from 50mm to 80mm diameter | For full lens zooms or deep focus pull actions, this device is superior; it easily covers the full lens ring range without pauses or extreme wrist twists required with a follow focus, and it can produce ultra slow zooms like a pro camcorder | Not applicable for really fast (fat) lenses like f-1.4 as these lens rings are too large