Size: AN8 to 1/2" NPT, the thread size of 8AN is 3/4-16 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing: The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended.

Size: AN8 to 1/4" NPT, the thread size of 8AN is 3/4-16 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size] AN8 to 1/4" pipe, the thread size of 8AN is 3/4-16 UNF. | [Material] Made of aluminum alloy 6061-T6, anodized black surface, bright appearance, anti-corrosion. | [Sealing] The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | [Application] Widely used in fuel system, cooling system, power steering system, etc. | [Notice] To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: AN8 to 1/8" NPT, the thread size of 8AN is 3/4-16 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size] AN8 to 3/4" pipe, the thread size of 8AN is 3/4-16 UNF, Degree: 90 degree elbow | [Material] Made of aluminum alloy 6061-T6, anodized black surface. | [Sealing] The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | [Application] Widely used in fuel system, cooling system, power steering system, etc. | [Notice] To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: AN8 to 3/8" NPT, the thread size of 8AN is 3/4-16 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: AN8 to 3/8" NPT, the thread size of 8AN is 3/4-16 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in cars' fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended.

8AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. | Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. | Maximum working pressure: 750psi. Bursting pressure: 2250psi. Temperature range: -40℉ to 257℉. | Package includes: 10pcs 8an black&red swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 8an hose separator clamp and 8an braided fuel line (Length: 20 Feet). Hose ID: 0.41". Hose OD: 0.65inch. | 8AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid; the hose fittings are made of aluminum alloy.

[Size] Thread Size of 8AN PTFE Fitting is 3/4-16UNF. | [Application] The PTFE Hose End only work with PTFE fuel line. | [Parameter] Working pressure: 1500PSI. Temperature range: -65°F-252°F. | [Seal] The AN side is sealed by a 37 degree angle. | [Material and Feature] Made of aluminum alloy 6061-T6. 360° Swivel design for easy assembly.

[Size] Thread Size of 8AN PTFE Fitting is 3/4-16UNF. | [Application] The PTFE Hose End only work with PTFE fuel line. | [Parameter] Working pressure: 1500PSI. Temperature range: -65°F-252°F. | [Seal] The AN side is sealed by a 37 degree angle. | [Material and Feature] Made of aluminum alloy 6061-T6. 360° Swivel design for easy assembly.

[Size] 8AN to 1/2 inch barb, and thread size of 8an is 3/4-16UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

Size: 8AN flare to 1/2" NPT, the thread size of 8AN is 3/4-16 UNF, Degree: 90 degree elbow | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: 8AN flare to 1/2" NPT, the thread size of 8AN is 3/4-16 UNF, Degree: 90 degree elbow | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: 8AN flare to 1/4" NPT, the thread size of 8AN is 3/4-16 UNF, Degree: 90 degree elbow | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: 8AN flare to 1/4" NPT, the thread size of 8AN is 3/4-16 UNF, Degree: 90 degree elbow | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: 8AN flare to 3/8" NPT, the thread size of 8AN is 3/4-16 UNF, Degree: 90 degree elbow | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size]8AN flare to 3/8" NPT, the thread size of 8AN is 3/4-16 UNF, Degree: 90 degree elbow. | [Material] Made of aluminum alloy 6061-T6, anodized black surface. | [Sealing] The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | [Application] Widely used in fuel system, cooling system, power steering system, etc. | [Notice] To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring. | Size: 9/16inch (14mm) OD. | Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉. | Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended) | Application: The fuel line check valve is widely uesd in carburetors and low pressure fuel systems.

Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring. | Size: 9/16inch (14mm) OD. | Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉. | Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended) | Application: The fuel line check valve is widely uesd in carburetors and low pressure fuel systems.

【Adjustable range】This wrench size can be adjusted to 3AN, 4AN, 6AN, 8AN, 10AN and 12AN. | 【Material】 It's made of lightweight 6061-T6 aluminum . Recommended for aluminum fitting, easy to damage for other materials. Advice:wrap the wrench's jaws with electircal tape to better protect the fitting &wrench. | 【Advantage】Multisize in one /Contact of four opposite sides | 【Size】length: 6.89 inch/17.5 cm,width: 2.5 inch/6.36 cm,thickness:0.52 inch/1.35cm. | 【Warranty】EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message.

[Universal]It can be applied to most cars, making sure there's enough room for Installation. | [Size] Hose length: 31.5in / 0.8m,hose ID:3/8",hose OD:2/3".The thread of the inlet and outlet is M16*1.5.Capacity:300ML. | [Baffled] The baffle is disassembled in a rotary manner, adding an appropriate amount of steel balls can increase the surface area of steam condensation and more effectively catch oil. | [Note] When the temperature outside reaches the freezing point or below, the crank vent system will generate a much greater amount of moisture which can present a risk of freezing. Please clean your oil catch can on a weekly or install the original PCV hose. | Oil Catch Can with or without Breather Filter: Install the oil catch can with breather filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can.

[Universal]It can be applied to most cars, making sure there's enough room for Installation. | [Size] Hose length: 31.5in / 0.8m,hose ID:3/8",hose OD:2/3".The thread of the inlet and outlet is M16*1.5.Capacity:300ML. | [Baffled] The baffle is disassembled in a rotary manner, adding an appropriate amount of steel balls can increase the surface area of steam condensation and more effectively catch oil. | [Note] When the temperature outside reaches the freezing point or below, the crank vent system will generate a much greater amount of moisture which can present a risk of freezing. Please clean your oil catch can on a weekly or install the original PCV hose. | Oil Catch Can with or without Breather Filter: Install the oil catch can with breather filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can.

Size: joins 2.25" OD pipe to 2.25" ID pipe, width of strap: 2.94inch /74.82mm. | Application: Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc. | Advantage: No welding design, easy to install or remove. | Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m.

[Size] Joins male/female flange 2.5" ID to 2.5" pipe. T-Bolt thread size: M8*1.25. | [Advantage] V-band clamp is easy to install and remove. The male and female flanges can be connected more stable, and provide a good seal with uniform pressure at the flange. | [Feature] Male and female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation. | [Material] 304 Stainless steel clamp and flanges; 304 stainless steel for long durability and reliability, corrosion resistance and high-temperature resistance. | [Application] Compatible for exhaust system, turbocharger, downpipe, muffler etc.