【FOR DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 3 mini】SmallRig Sling Grip 3028 is specially designed for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 3 mini gimbal. This handle is designed to reduce arm fatigue during low angle shooting and make handling your DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro handheld gimbal easier with this Sling Grip. | 【180 DEGREE ADJUSTMENT】Offering 180° adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip. | 【QUICK RELEASE CLAMP】The grip mounts onto the gimbal using a NATO clamp and can support up to 17.6lb/8kg. Also, it features an anti-removal stud to ensure a safe and quick operation. An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. | 【ANTI-SLIP DESIGN】The silicon grip is an anti-slip design and gives you more comfort when holding it. Its sleek design and compact structure match perfectly with the stabilizer. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. It can work with SmallRig Shoulder Strap KPAC2466 to reduce the arms burden. | 【MULTIPLE MOUNTING POINTS】Multiple 1/4"-20 and 3/8"-16 threads for ARRI are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, it can be mounted with wireless go, sound receiver, and Monitor Mount 2905.

Greatly Reduce the Burden: The sling handle kit is specially designed for DJI RS 2 / RS 3 / RS 3 Pro. After opening the tripod at the bottom of the stabilizer, when shooting in a fixed position, there is almost no need to exert force on the arms; when not shooting, release your hands and place the stabilizer in front or on the side of the body like a shoulder bag. Allows you to quickly switch between shooting and resting states, reducing physical exertion during video creation. | QD Quick Release Mount: Both ends of the shoulder strap have QD mount that can be quickly installed and removed. The shoulder strap also has two sliding buckles for you to quickly adjust the length of the shoulder strap and switch shooting positions and postures at any time. | 6KG Maximum Load-Bearing Capacity: The maximum load-bearing capacity of the sling handle is 6kg. Using thickened weaving process, the shoulder strap forms a triangular structure by the waist, abdomen and shoulder to effectively bear gravity instead of the arms and provide your creations with safe and reliable support. | Multiple Expansion Interfaces: The handle has multiple 1/4"-20 and 3/8"-16 for ARRI threaded holes, which can be connected to Magic Arm 2070B and Monitor Support 2903B to expand the monitor. Cold shoes are built in the top and side of the handle. There is a slider on the side to install Monitor Support 3026B, microphone, image transmission and other equipment. | Ergonomic Design: The handle is made of aluminum alloy + silicone and adopts an ergonomic curve grip, which is comfortable to hold, anti-slip and anti-freeze. The overall design style is consistent with the stabilizer.

Optimized for DJI RS Series: Designed specifically for DJI RS 2 / RS 3 Pro / RS 4/ RS 4 Pro, this handgrip offers a range of functions, including shutter control, recording, joystick operation, mode switching, centering/locking, and power/sleep mode, ensuring versatile performance during shoots | Effortless Focus Control: Features a smooth dial with stepless adjustment for precise and seamless focus control, enhancing shooting accuracy and efficiency. The focus dial enables seamless adjustment of the 3-axis system, focus control, and various camera parameters | Broad Accessory Compatibility: The handle features various mounting options, including 1/4"-20 threaded holes, 3/8"-16 locating holes, a cold shoe mount, a NATO rail, a QD socket, and strap slots. The handle can attach phone holders for DJI, SmallRig monitor mounts 2905B and SmallRig shoulder strap 4118 | Quick Setup and Storage: Rapid assembly and disassembly streamline shooting sessions, providing quick setup and convenient storage for efficient on-the-go production. The handle can support a weight of up to 6.0kg/13.2lb | Ergonomic Design: SmallRig Adjustable Sling Handle 4326 is made from soft silicone and features a double-curve design for a non-slip, ergonomic grip. To mount the handgrip on the side of the stabilizer for DJI, use the included wrench to ensure the M4 screws are tightened securely

【One-stop Professional Solution for Phone Shooting】SmallRig all-in-one quick release mobile video kit Pro edition 4704 provides a one-stop perfect solution for professional mobile phone video shooting. The kit includes universal QR phone cage 4299B, rotating quick release wireless control handle 4402B, rotating quick release handle 4403B, quick release tripod, microphone 3452C, P96 dual-color temperature LED light 3286B, power bank holder 4600, 2-in-1 USB-C PD fast charging cable, audio adapter and other accessories. | 【Wide Compatibility】The phone cage is compatible with multiple mobile phone models, and is compatible with mobile phones with a width of 2.52~3.46 inches (64mm~88mm), such as for iPhone 16 / 15 / 14 / 13 series, for Samsung Galaxy S24 / S23 / S22 series, for Huawei Mate 60 / 40 series, for Google Pixel 8 / 7 / 6 series, etc. The phone cage can fix the phone through for MagSafe magnetic suction, or through the included mobile phone clip. Supports the use of mobile phones with cases. | 【Rotating Quick-Release Dual Handles】The two quick-release side handles included in the kit support quick-release connection and 360° rotation, which can be comfortably held at any angle, and switch between side handle and top handle mode in one second. The rotating quick release adapter is equipped with a 9.0 - 11.0kg (19.8 - 24.2lbs) damping adjustment ensuring stability, reliability, and flexibility. A hexagonal wrench for installation is placed inside the handle, which is easy to store and use whenever you want. The detachable wireless controller on the handle's top supports remote shutter release and recording, with a maximum remote control distance of up to 10m / 32.8ft. | 【P96 LED Light】SmallRig P96 RGB video light is a lightweight, portable and stylish mini light, with 0-100% brightness control, and color temperature scale from 2700K to 6500K. The light comes with a built-in 2200mAh lithium-ion battery, which is charged via the included USB Type-C charging cable and features a 105-minute operating time (maximum brightness). | 【High-quality Microphone】Shotgun microphone's cardioid pattern reduces background noise in the periphery and focuses on the sound in front of the camera to capture clear directional sound. The compact microphone comes with a standard foam windshield, or you can use the furry windshield if you are using the rig in windy conditions. The microphone is battery-free, plug-and-play, and comes with camera / smartphone cables for your choice. | 【Rich interfaces for Ecological Expansion】The upgraded universal phone cage contains multiple 1/4-20” threaded holes, cold shoe ports and quick release interfaces, and adds expansion ports of 67mm filter, shoulder strap hole and expansion dock fixing port. Support the free collocation and combination of accessories, providing more possibilities for shooting and bringing more fun. Paired with a quick release tripod, the kit allows for instant assembly and disassembly, facilitating quick transitions between handheld and tripod modes.

Wider Compatibility: SmallRig Anti-Twist Cold Shoe Mount Support (2pcs) 5032 is designed for attaching additional accessories such as video lights and microphones. It can be mounted on any accessory with a 1/4"-20 threaded interface | Anti-twist Design: The set includes detachable positioning pins that align with the 1/4"-20 threaded interface with a locating hole, making it compatible with most SmallRig cages and effectively ensuring equipment stability and safe shooting | Anti Drop Design: The anti-twist cold shoe mount features a unidirectional sliding design to prevent accidental slippage, and an arrow on the cold shoe guides users on the accessory installation direction | Lightweight and Sturdy: This Anti-Twist Cold Shoe Mount 5032 is made of aviation grade aluminum alloy, which is scratch resistant and rust proof. The size is only1.0 x 1.0 x 0.5in, weighing only 13g/0.46oz, compact and portable. It is includes padding at the connection point to avoid scratching equipment | Anti Loss Design: This cold shoe reserved storage slot for the positioning pins. When not in use, the positioning pin can be stored on the side of the cold shoe to prevent loss. Note: Not compatible with flash units featuring bottom metal contact points

【Enhanced Shooting Flexibility】 The SmallRig carbon fiber tripod is engineered for multi-scene/angle shooting. Featuring a easily reversible and detachable center column, this travel tripod enables you to effortlessly capture stunning low-angle shots.The camera tripod provides three adjustable angles with quick-adjustment buckles, allowing you to easily find the optimal position for your shots. It allows you to shoot in narrow areas or on uneven terrain for different shooting scenarios. | 【Premium Carbon Fiber Construction】 Crafted from high-end carbon fiber material, this tripod leg not only ensures lightweight and strength but also boasts excellent texture. It offers enhanced corrosion and abrasion resistance, ensuring its durability over time. Despite weighing a mere 2.6 lbs, it can securely hold equipment weighing up to 26.4 lbs. Moreover, the lightweight tripod includes a handbag, allowing for easy transportation to specialized and complex environments. | 【2-IN-1 Tripod & Monopod】 The tripod can be easily turned into a monopod or walking stick, it is a good companion for you to go hiking or traveling. 4-section column legs with 3 quick release flip-locks allows you to adjust the working height from 17.3" to 62.2" in seconds. It is more flexible and easy to use than the knob lock. 15.8" folden size is easily took to anywhere for outdoor photography. | 【360° Detachable Ball-Head】 With the quick-release panoramic ball head, you can effortlessly capture photos from any angle. The ball head swivels 360° and tilts 90° through the damping adjustment knob, providing extensive shooting possibilities. The gimbal also features a 360° horizontal scale, enhancing positioning accuracy. Moreover, the high-compatibility quick release system is compatible for Arca-Swiss QR plates. | 【Innovative Design】 Setting itself apart from other tripods, this product incorporates a 1/4" threaded hole in the bracket. This additional feature supports the use of external magic arms, mobile phones, monitors, and more. Package Include : SmallRig Carbon Fiber Tripod x 1, storage package x 1, user manual x 1.

Extensive Compatibility : Dual ball heads with magic arm features for ARRI 3/8"-16 Locating Screw and 1/4"-20 Screws (With Retractable Pins) on the end for DSLR cameras, action cameras, LED lights, flashes, and so on. | Anti-twist Retractable Pins : Magic arm with the retractable Pins on each end to prevent twisting. The locating pins are retractable spring designs. You can mount it on the accessories with 1/4" locating holes and 3/8"-16 locating holes for ARRI or with 1/4" threaded holes and 3/8"-16 locating holes for ARRI. | 360° Flexible Adjustment : The camera magic arm with an adjustable thumb lever could be adjusted in different positions and angles via both the ballhead and ballhead clamp. It comes with a small magnetic wrench at the bottom to tighten the thumbwheels on each end. | 12Ib Payload : The load capacity of the magic arm is 12Ib (5.5kg). Firmly fix your field monitor, LED lights, audio recorders, etc. Each ballhead is 0.79 inch (20mm) in diameter. This item weighs only 0.2 Ib (90g) , making it easy to carry around and store. | Durable and Stable : The magic arm holder is made of CNC-processed aluminum alloy and stainless steel, which is durable. The ball head with rubber rings is more stable. The rubber pads on each end protect your device from scratching. | Notice: Please note that the diameter of the ball head is 20mm and will NOT fit other brands clamps.

Extensive Compatibility : Dual ball heads with magic arm features for NATO Clamp and 1/4"-20 Screws (With Retractable Pins) on the end for DSLR cameras, action cameras, LED lights, flashes, etc. | Anti-twist Retractable Pins : Magic arm with the retractable Pins on each end to prevent twisting. The locating pins are retractable spring designs. You can mount it on the accessories with 1/4" locating holes and NATO Rail or with a 1/4" threaded hole and NATO Rail. | 360° Flexible Adjustment : The camera magic arm with an adjustable thumb lever could be adjusted in different positions and angles via both the ballhead and ballhead clamp. It comes with a small magnetic wrench at the bottom to tighten the thumbwheels. | 12Ib Payload : The max load capacity of the magic arm is 12Ib (5.5kg). Firmly fix your field monitor, LED lights, audio recorders, etc. Each ballhead is 0.79 inch (20 mm) in diameter. This item weighs only 0.2 Ib (91g) , making it easy to carry around and store. | Durable and Stable : The magic arm holder is made of CNC-processed aluminum alloy and stainless steel, which is durable. The ball head with rubber rings is more stable. The rubber pads on each end protect your device from scratching. | Notice: Please note that the diameter of the ball head is 20mm and will NOT fit other brands clamps.

👍 Designed for Atomos Shinobi：Fit the body and protect the monitor from bumps and scratches;Do not block the buttons and interfaces of the fuselage;Do not interfere with the installation of the rear battery;Do not interfere with the installation of the original hood for Atomos | 👍 Multiple threaded Holes: SMALLRIG shinobi cage has multiple 1/4" and 3/8" threaded holes in the top, side and bottom for external threaded fittings such as threaded hole magic hand 2071 | 👍 Built-in Locating Hole for ARRI: Both top and bottom has a positioning hole for ARRI , can be connected to magic arm 2115 | 👍 Built-in NATO Rail: Both top and bottom has a NATO Rail, can be connected to the chute magic hand such as 2071, 2072, chute EVF bracket such as 2205 | 👍 What You Get: 1 x cage; 1 x HDMI Clamp 1693; 4 x 1/4 Screw; 1 x Hex Spanner

For Sony A7C II/A7CR: SmallRig Baseplate 4439 is designed for Sony Alpha 7C II/Alpha 7CR to improve the grip of the camera, quickly switch between tripod, stabilizer and handheld shooting, while protecting the bottom of the camera. | Quick-Release Plate for Arca: The quick-release plate for Arca on the bottom is designed for DJI RS 2/RSC 2/RS 3/RS 3 Pro, compatible with RS 2/RSC 2 original quick-release plate and SmallRig Quick-Release Plate for Arca 3154, allowing your camera to be easily used with a stabilizer. | Multiple Expansion Interfaces: The QD hole at the bottom is compatible with QD shoulder strap, and the wrist strap hole is compatible with SmallRig Wrist Strap 3848. In addition, there are built-in 1/4"-20 and 3/8"-16 threaded holes to meet your more expansion needs. | Hinge Arm Design: The hinge arm is designed next to the battery compartment, which enables you to replace the battery smoothly without blocking the battery door, enhance the grip of the fuselage and fit the curve of the fuselage better, giving your little finger a place to rest. | Anti-Scratch: The base plate is connected to the bottom of the camera through 1/4”-20 screws. The built-in protective gasket and edge protrusions can prevent the camera from being scratched and deflected. A built-in magnetic wrench at the bottom makes it easy to disassemble and assemble, and can be used anytime. | Note: This product cannot be used with the SmallRig Horizontal-to-Vertical Mount Plate for Sony Alpha 7C II / Alpha 7CR - 4424

For Sony Alpha 6700: SmallRig Camera Baseplate 4338 is designed to enhance grip experience and prevent scratches for Sony Alpha 6700, which is lightweight, compact, and form-fitting with the camera | Excellent Handgrip Feeling: A hinge arm at the battery door fits camera curve, which can not only enhance the bare metal grip, but also quickly replace the battery. | Integrated Swiss Plate for Arca: Integrated Swiss quick release plate for Arca facilitates fast switching between handheld, tripods or gimbals for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro shooting modes. | Stable and Anti-twist Design: This baseplate attaches to the bottom of the camera via a 1/4" -20 screw with features built-in silicone pad to prevent scratches and twisting. | Multiple Mounting Points: At the bottom there are QD socket, compatible with QD shoulder strap, and it also reserves waist strap holes for a Hand Strap 3848. Besides, a magnetic wrench is included for easy disassembly and assembly.

1. Portable handheld kit for easy low-angle shot； | 2. Triple-point locking for enhanced stability and anti-twist； | 3. A hinged arm at the battery door fits camera curve and enhances grip experience； | 4. Multiple mounting points: 1/4"-20 threaded holes, locating holes for ARRI 3/8" -16, cold shoe mounts, NATO rails and QD socket support handles, microphones, LED lights, monitors, etc. | 5. HDMI cable clamp protects interfaces and ensures stable signal transmission.

【V-Lock Battery Plate】SmallRig V Mount Battery Plate with Dual 15mm Rod Clamp 3016 utilizing a standard V mount fits most V mount batteries to provide more excellent battery life for your camera rig with your battery's power port(s). | 【Comes with Dual Rod Clamp】It comes with a dual 15mm rod clamp, which allows you to mount the battery plate onto standard 15mm LWS rods. | 【Multiple Mounting Points】The plate itself features multiple 1/4"-20 countersinks, M3 countersinks, M4 countersinks, 1/4"-20 thread holes, M4 thread holes, and a locating hole for ARRI to attach a dual rod clamp, a magic arm, or other accessories. | 【Wide Compatibility】The mount features a V-lock mount with a quick-release lever that fits most V-mount batteries, but it is not compatible with PAGlink series V mount batteries or Patona Premium Battery for BP-190WS. The mount has no electronics and is meant to mount a battery that has its own power outputs to power your gear. | 【High Customization】Two stoppers will prevent the battery from twisting when attached. The plate is also for Blackmagic URSA mini. (Note: 1. No V-Lock part (male) provided with the plate. 2. This is purely a mounting solution for a V-mount battery - no power ports on the plate.) | 【Related Products】SmallRig mini V-mount Battery VB50 (50Wh) 3579 and VB99 (99Wh) 3580 are now available, multi-interfaces and PD fast-charging design, widely compatibility use for cameras, camcorders, monitors, smartphones, etc.

V-Lock Battery Plate: SmallRig V Mount Battery Plate with Dual 15mm Rod Clamp 3016 utilizing a standard V mount fits most V mount batteries to provide more excellent battery life for your camera rig with your battery's power port(s) | Comes with Dual Rod Clamp: It comes with a dual 15mm rod clamp, which allows you to mount the battery plate onto standard 15mm LWS rods | Multiple Mounting Points: The plate itself features multiple 1/4"-20 countersinks, M3 countersinks, M4 countersinks, 1/4"-20 thread holes, M4 thread holes, and a locating hole for ARRI to attach a dual rod clamp, a magic arm, or other accessories | Wide Compatibility: The mount features a V-lock mount with a quick-release lever that fits most V-mount batteries, but it is not compatible with PAGlink series V mount batteries or Patona Premium Battery for BP-190WS. The mount has no electronics and is meant to mount a battery that has its own power outputs to power your gear | High Customization: Two stoppers will prevent the battery from twisting when attached. The plate is also for Blackmagic URSA mini. (Note: 1. No V-Lock part (male) provided with the plate. 2. This is purely a mounting solution for a V-mount battery - no power ports on the plate.) | Comes with Various Mounting Threads: There are two 1/4" -20 mounting holes on the Female V-Dock, and you can attach this assembly directly to a SmallRig camera cage kit, SmallRig monitor frame, or SmallRig shoulder pad mount. The V-Lock with three M3 holes can be used as a replacement of the original V-Lock comes with the V-Mount battery

Streamlined Design: SmallRig R5 Mark II Camera Cage 4975 adopts a streamlined one-piece wrapping design, providing comprehensive protection for your camera, and ensures smooth control over the camera buttons for easy operation. | Anti-Twisting: The R5 Mark II cage is locked in place with 1/4"-20 screw at the bottom and positioning blocks on both sides(Please remove the positioning blocks on both sides of the expansion frame before installing the expansion frame), preventing any twisting and ensure a stable shooting experience. Built-in many silicone pads are also included to protect your camera from scratches. | Built-in Quick Release Plate: Built-in bottom plate for Arca-Swiss, allows direct mounting for Arca-Swiss tripod 4060 & 4353. It is compatible with RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro stabilizers for DJI, and can quickly switch between stabilizer, handheld, and tripod scenes. | Multiple Mounting Options: The cage for Canon EOS R5 Mark II features built-in 1/4"-20 and 3/8"-16 threaded holes, for ARRI 3/8" -16 locating hole, QD interface, strap slot and other multi-specification interfaces, which can be combined with various expansion solutions. Features HawkLock cold shoe mount, HawkLock quick release plate for Arca-Swiss to improve work efficiency. | Sturdy Screen Protection: The filmmaking camera cage includes a scratch-resistant 9H tempered glass screen protector with IK03 impact resistance rating. Please notice the tempered glass screen protector is intentionally designed slightly smaller than the screen edges to prevent dust from entering through larger gaps, constituting a normal design feature.

Streamlined Design: SmallRig R5 Mark II camera cage kit 4976 adopts a streamlined one-piece wrapping design, providing comprehensive protection for your camera, and ensures smooth control over the camera buttons for easy operation. | Anti-Twisting: The R5 II cage kit is locked in place with 1/4"-20 screw at the bottom and positioning blocks on both sides (Please remove the positioning blocks on both sides of the expansion frame before installing the expansion frame), preventing any twisting and ensure a stable shooting experience. Built-in many silicone pads are also included to protect your camera from scratches. | Built-in Quick Release Plate: Built-in bottom plate for Arca-Swiss, allows direct mounting for Arca-Swiss tripod 4060 & 4353. It is compatible with RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro stabilizers for DJI, and can quickly switch between stabilizer, handheld, and tripod scenes. | Multiple Mounting Options: The cage kit for Canon EOS R5 II features built-in 1/4"-20 and 3/8"-16 threaded holes, for ARRI 3/8" -16 locating hole, cold shoe, QD interface, strap slot and other multi-specification interfaces, which can be combined with various expansion solutions. Features HawkLock cold shoe mount, HawkLock quick release plate for Arca-Swiss to improve work efficiency. | Lightweight and Efficient: Equipped with an ergonomic "Black Mamba" top handle, it provides a more comfortable and stable handheld shooting experience. It includes an HDMI & USB-C cable clamp that utilizes hand-tightened screws for quick release, ensuring secure data transmission. | Sturdy Screen Protection: The filmmaking camera cage includes a scratch-resistant 9H tempered glass screen protector with IK03 impact resistance rating. Please notice the tempered glass screen protector is intentionally designed slightly smaller than the screen edges to prevent dust from entering through larger gaps, constituting a normal design feature.

Excellent load-bearing performance: Supports mounting the D85 parabolic softbox and RA-F150 Fresnel lens, with a maximum load capacity of approximately 1.5kg. | Compatible with standard Bowens Mount accessories: Compatible with the majority of standard Bowens Mount modifiers available on the market. | Horizontal/vertical adjustment: After attaching to the light stand, it allows for a 360° horizontal adjustment of the light body and accessory, as well as a 180° vertical adjustment.

【C to A connectivity】 The C to A cable offers you a convenient way to optimize your viewing. Connect digital cameras, camcorders, tablets, or other micro cable-enabled devices to the port on most displays to enjoy the high-definition audio and video. | 【Ultra Thin & Flexible】The ultra-thin and flexible high-speed cable (55m/1.8ft) with 3.6mm diameter fits perfectly in tight spaces, designed for gimbal, camera stabilizer, and rigs applications where flexibility and compact cable routing is required. | 【High-Speed Cable】Ultra thin 2.0 version standard cable supports Ultra HD 4K@60Hz, Full HD 1080P, 3D, Ethernet, Audio Return Channel(ARC), HDR, and you can transmit high-resolution sound formats. | 【4K@60Hz video output】The cable fully supports 4K resolution at 60Hz and 2K resolution at 165Hz with life-like color. You can enjoy big screens and true-to-life 4K visuals for the ultimate visual experience. | 【What you will get】1 x Cable，1 x Cable tie

【Prevents Cable Disconnects】Designed for Canon R5 / R6 / R5 C Cage 2982 / 3464 and R6 Mark II Camera Cage 4159 to prevent the camera's cables for HDMI and USB Type-C from accidentally disconnecting | 【Safe Installation】The clamp attaches to the side of the cage using two M3 Screws and fixes the cables using two knurled 1/4"-20 screws | 【For HDMI and USB-C Cables】Secures both for HDMI and USB-C cables at the same time. Each screw adjusts a sliding block that can be tightened to accommodate varying diameters | 【Durable and Sturdy】This Cable Clamp is constructed of a sturdy aluminum alloy and comes with an Allen wrench | 【What You Get】:The package include 1 x Cable Clamp, 2 x M3 Screw and 2 x Allen Wrench

【Designed for AirTag】SmallRig Cage MD4149 only for AirTag provides the universal way to attach your camera via two 1/4"-20 screws for adding the ability to quickly track your camera location. | 【Dual 1/4"-20 Screw Mounting】The mounting compartment for AirTag has an integrated through slot with 1/4"-20 threaded holes in 9-18mm (0.4-0.7") pitch, allowing for attaching your camera cage, plate or other accessories in multiple scenarios. | 【M2.5 Screw Cover Mount】Using sturdy Torx M2.5 screws to prevent your device from being removed quickly, so as to maximize the possibility of finding your camera. Please Note: Recommend replacing the Torx screws with new ones after using them many times. | 【Side Holes for Signal Transmission 】The hole on the side of the SmallRig cage for AirTag can enhance the proximity tracking distance. Also, the sleek style can effectively hide your device, and the compartment cover is made of PC to avoid interfering with the tracking distance of your device. | 【EVA Rubber Pad Dampens Noise】Also, the mounting compartment 4149 for AirTag has built-in EVA pad to protect the your device and prevent noise during movement. | 【Important Note】1. After attached, use the APP "Find My" to track your device up to 10 meters via Bluetooth proximity. 2. After attached, use the APP "Find My" to track your device up to 100 meters or more. 3. Package ONLY includes the cage for AirTag. 4.Recommend replacing the Torx screws with new ones after using them many times.

For Atomos Ninja Series : SmallRig CMA2209 is integrated design for Atomos Ninja V / Ninja V plus / Ninja / Ninja Ultra . The monitor cage mounts to the monitor via a 1/4"-20 screw on the top and two M3 screws on the left side to provide full protection for the monitor.The cage provides an ideal production tool for expansion shooting. | With for HDMI Cable Clamp: The camera field monitor cage includes a single for HDMI cable clamp that works with a range of cables and is ideal for the AtomFlex 4K/60p cables. Besides, the monitor cage supports the use of a second SmallRig for HDMI Cable Clamp 1693 for the for HDMI output. It is attached to the left to protect the for HDMI cable and port. | Expansion Mounting Points: Across the top and bottom of the monitor cage, there are multiple 3/8"-16 holes and 1/4"-20 holes to access Monitor Mount 2905 / Magic Arm 2070. The locating mount points for ARRI allow attaching Monitor Mount 2903 / Magic Arm 2115. The cage has Drive locks that incorporate the additional size of standard 2.5" drives into the cage's form factor for backwards compatibility with Master Caddy II. | Built-in NATO Rails: NATO rails are also provided on the top and bottom to allow use with a range of SmallRig mounts, such as the SmallRig Ball Head Magic Arm 3875, for quick release. | Compatible with the Original Sun Hood: This cage fits the original sun hoods. The sun hood frame needs to be fitted before fitting the unit into the cage and can remain in place to provide additional protection, and the folding sun hoods can easily be removed. If a sun hood is desired, please buy the SmallRig Sun Hood VH2269 separately.

Full/Half Cage 2-in-1: This full cage designed specifically for Blackmagic Design Cinema 6K can be disassembled into a half cage, making it easier to balance when used with a stabilizer. | Included Lens Mount Converter Support: The included support is compatible with lens mount converter for Sigma MC-31 / MC-21, etc. and prevent damage to the camera body mount. | Three-Point Locking: With two 1/4"-20 screws at the bottom and one 1/4"-20 screw at the top, the cage locks the camera at three points to make it stable and not deflect. The bottom has a built-in hex wrench for easy disassembly and assembly. | Anti-Scratch & Non-Interference Interface: The cage has built-in silicone gaskets in many places to prevent scratches on the camera. The cage does not interfere with the normal use of the buttons, card slots, screen, battery compartment and other interfaces on the body. | Multiple Mounting Points: Built-in 1/4"-20, 3/8"-16 threaded hole, and positioning hole for ARRI, which can attach Side Handle 4015 and Top Handle 2165C; the NATO rail can attach Side Handle 4017; the cold shoe can attach Microphone 3468, Video Light 3286B, and SSD Support 3272; the wrist strap, shoulder strap and QD interface can attach Wrist Strap 3848 and Shoulder Strap 2428. Two horizontal 1/4"-20 holes at the hand grip can prevent the camera from deflecting in vertical shooting scenes.

For Canon R8 Camera: SmallRig Cage for Canon R8 is designed to provide accessory mounting points and fit protection for the fuselage, enhancing the experience of grip for the fuselage. | Multiple Mounting Points: The cage includes multiple 1/4"-20 holes and 3/8"-16 locating holes for ARRI, which can support Top Handle 3765, Side Handle 2093C, Monitor Mount 2903B, and Magic Arm 3875; The top cold shoe mount attaches Microphone 3468, LED Video Light 3286B; and the left NATO rail fits Rotating Side Handle 3260 & 3813. | Quick-Release Plate for Arca: Built-in quick-release plate for Arca at the bottom is suitable for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals and tripods for Arca-Swiss.So you can quickly switch the camera between gimbal, handheld, and tripod shooting. | Anti-Twist Locking Design: The cage locks the camera via one bottom 1/4"-20 screw and two side lock adapters. Comes with built-in rubber pads to prevent scratches and gives full access to buttons, card slots, flip screen, and battery door. Note: Please remove the side lock adapters before installing this cage. | More Dedicate Details:There is a QD socket for a quick-release shoulder strap buckle. The built-in magnetic wrench at the bottom is convenient for disassembly and assembly.

Only For Insta360 ONE X4: SmallRig 4278 is designed for Insta360 X4 action camera while maintaining access to camera's lens port, controls, and battery slot. | Tool-Free Installation: The camera is placed into the cage from the top and tightened with a hand screw. It can be installed without the help of tools. | Easy Battery Replacement: The side of the cage is hollowed out, and the battery can be replaced without removing the cage, which is convenient and time-saving. The formfitting full-frame aluminum design protects your camera while adding multiple accessory mounting options. | Anti-Scratch Design: A silicone lens cover is included to protect the lens when stored and prevent the lens from being scratched; the cage fits the shape of the camera, and there are silicone gaskets on the inside to prevent scratches on the camera body. | Multiple Mounting Points: There is a cold shoe and a 1/4"-20 anti-deflection threaded hole on one side of the cage, which can be used to install accessories such as microphones and LED video lights. The action camera mount on the bottom can be folded to store, and there is also a 1/4"-20 threaded hole at the bottom, which can be directly connected to a 1/4"-20 screw tripod, Selfie Stick 4758, etc. | Compatible with Original Accessories: Flash Transmission Companion, Audio Adapter, Protective Mirror, Screen Protector

For Panasonic LUMIX S9: SmallRig Cage for Panasonic S9 4515 is designed to protect the camera and provide multiple expansion interfaces to facilitate content creation. The cage features a minimalist design, complemented by a silver and black color scheme that fits perfectly with the camera. | Comfortable Grip Experience: The cage for Panasonic S9 is equipped with ergonomically designed wooden handgrip to improve the griping experience. | Multiple Mounting Points: Multiple built-in mounting interfaces include 1/4"-20 holes and 3/8"-16 locating holes for ARRI to attach a top handle(ID: 3765) , Microphone (ID: 3487), Wrist Strap (ID: 3848), etc. The cage provides unobstructed access to the camera buttons, card slots, LCD screen, MCS switch, battery, etc. | Installation Method: The cage is secured by a 1/4"-20 screw at the bottom and a side lock on the right side, and has built-in silicone gaskets in several places to prevent scratches on the body. Built-in dual-head wrench on the bottom of the cage for easy disassembly and assembly. | Quick Switch Design: The quick-release plate for Arca-Swiss at the bottom, can be quickly installed to the tripod for Arca.

[Compatibility] SmallRig Cage for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 7R IV / Alpha 1 with VG-C4EM Battery Grip 3594 is designed to protect your camera and provide accessory mounts. The package contains four side lock adapters, the black one for Sony A7 IV and silver gray ones for Sony A7S III/ A7R IV/ A1. Please select the appropriate locking slider for adaptation according to your model. | [Quick Switch and Full Access Design] Built-in quick release plate for Arca standard at the bottom enables quick switch between tripod and handheld shot. With the cage on, you sill have full access to camera buttons, card slots, battery door, and flip screen. | [Three-Point Locking] The cage is secured by one 1/4''-20 screw at the bottom and two side lock adapters via the shoulder strap holes on each side, you will get greater stability without worrying about constant shaking and moving. | [Mounting Options] The cage features multiple 1/4''-20 threaded holes and 3/8" -16 locating holes for ARRI standard to attach Top Handle 1638 and 2165 for a low-angle shot, Monitor Mount 2904 and 2903 as well as Side Handle 2093. Integrated Cold shoe mount on the top supports microphones or LED lights, and Built-in NATO rail on the left fits NATO Handle 2427 and 3260. | [More Extension Possibilities] Two 1/4''-20 threaded holes on the front bottom support Rod Clamp 1943 for matte box, follow focus, lens support, etc.. One of the front 1/4’’ threaded hole features a small locating hole suits Rod Clamp 3276 for follow focus. The bottom 1/4''-20 threaded holes allow for mounting RS 2 / RSC 2 / RS 3 / RS 3 Pro Quick Release Plate (Upper) with 2 screws for greater stability. | [More Dedicate Details] The cage features multiple rubber pads inside to prevent scratches and comes with a magnetic spanner for easy disassembly and assembly. Optional Cable Clamp 3000 is separately available for Sony A7 IV and A7S III to protect cable port and prevent signal disconnection. (NOTE: The clamp 3000 is NOT compatible for Sony A1 and A7R IV)

Designed for Sony FX30 / FX3: The FX30 / FX3 cage features modular design, including a NATO rail module and a U-shaped cage module. The NATO rail is secured on the top via two 1/4"-20 screws and allow connecting the original XLR top handle after disassembly; the U-shaped cage module is fixed via 1/4"-20 screws on both sides and the bottom to prevent twisting. The package comes with a dedicated cable clamp for HDMI to protect the interface and ensure the signal stability during shooting. | Classic Bright Black Surface: Classic design features bright black shape, bring you a new sense of fashion. The battery compartment is designed with an hinge arm to fit camera curve for improved grip experience for little finger. Built-in rubber pads preventing scratches. | Multiple Mounting Points: The cage features 1/4"-20 holes fits Magic Arm 3873; the locating hole for ARRI suits Top Handle 3765; the side NATO rail can attach Side Handle 3813; the 1/4”-20 positioning holes on the upper left corner and left side can attach Rod Clamp 3598 for follow focus; two 1/4”-20 holes on the side can attach quick release plate; built-in cold shoe can attach Microphone 3468, LED Video Light 3286B. | Quick Release Plate for Arca: The QR plate at the bottom is compatible for DJI RS 2, RSC 2, RS 3, RS 3 Pro, quick release plate (height increase pad) and plate for Arca 3154. The cage also features strap holes on both sides and the bottom, which are compatible with Hand Strap 3848, Shoulder Strap PSC2428, etc. The bottom QD socket to install QD shoulder strap, and a magnetic wrench is included for easy disassembly and assembly. | Note: 1. The spacing between the 1/4" holes on the NATO rail is 27mm, so it is not compatible with accessories with a spacing of 18mm. 2. When using the original XLR handle, please remove the NATO rail first. | Power Backup Solution: SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824(Asin:B09Z6TRBH8).

【Original Design】SmallRig Cage Kit 3788 is specially designed for Atomos Ninja V/Ninja V+, and this Camera Accessory Kit is designed to provide full protection for monitor and screen. | 【Connect More Accessories】Cage 2209 has a NATO rail for Magic Arm 2071, Monitor Mount 2385; 1/4"-20 threaded holes support Monitor Mount 2905, Magic Arm 2070; 3/8" -16 locating holes for ARRI type allow attaching Monitor Mount 2903, Magic Arm 2115. The Cage Kit for Atomos from SmallRig provides an ideal production tool for Atomos Ninja V/Ninja V+. | 【All-Round Protection】Smallrig 3788 also provides professional HDMI cable clamp to protect interface and prevents disconnection. The kit includes Cage 2209, Sunhood 2269, which can block strong sunlight, Silicone Case (Kit) 3448, embedded with environmentally friendly brass to help dissipate heat and featuring screen protector, which is easily applied and protects the monitor screen from fingerprints, water spray, dust, scratches, and knocks. | 【Packgge Include 】1 x Cage，1 x Cable Clamp，2 x 1/4”-20 Screw，4 x M3 Screw，3 x Allen Wrench，1 x Sunhood，1 x Silicon Case，2 x Anti-twist Locating Plate，1 x Screen Protector，1 x Wipe，1 x Tissue，1 x Dust cloth，1 x Dust Absorber | 【SmallRig Warranty Service】Our customer representative will get back to you within 24 hours to troubleshoot the reported issue, 30-day No-hassle Return Service, Worry-free 2-year Warranty

【Reduce about 20dB Wind Noise】The furry windscreen is made of high-quality materials to reduce wind noise about 20dB and also improves recording. It will reduce the screen blockage when viewing the screen in selfie with 12mm / 0.47in camera mic windshield. | 【Protect the Camera】The slide-in cage is locked by one click and features built-in silicone cushions for a secure fit. Paper tag helps to pull out the camera stand in a easy way. And the silicone lens cap protects the lens from scratches. Please remove the windshields before disassembling the cage. | 【Built-in 1/4"-20 Thread Holes】The cage not only gives full access to buttons, interfaces and built-in camera stand but comes with 1/4"-20 threaded holes to attach accessories like tabletop tripod or the cold shoe adapters (included in the box) for use in live broadcast and vlogging. | 【Magnetic Suction Installation】The camera mic windshield magnetically mount onto the top of the circular mounting plates, which is convenient and time-saving. Please make sure the top of the camera is clean and free of dust and then align the mounting plates and windshields with the camera microphones. | 【Mouting Plate Repeated Usage】The bottom of the mounting plates are connected to the camera by removable adhesive, so it can be used repeatedly and easily disassembled. The bottom adhesive may lose stickiness after using many times. Wash and dry it to make it reusable. The wear and dirt-resistant polyester storage bag stores the camera and the cage kit altogether.

For Sony A6700: SmallRig Cage 4336 is designed for Sony A6700, which includes a cable clamp for HDMI, protects the camera while making it easy to record videos with its multiple accessory mounting points, which also allows you to focus on capturing stunning images. | Excellent Grip Feeling: Featured with an additional hinge arm on the battery door, this product not only fits the curve of the camera perfectly, but also significantly improves the overall grip feel.The ergonomic design provides a comfortable and secure grip of the camera. | Full Protection: The all-in-one complete housing fits the Sony A6700 very well, locks the camera by 1/4"-20 screw and M2.5 screw, which maintains full access to your ports, controls and battery door and provides protection for your portable camera platform. Note: Remove the strap ring on the right side of the camera before installing the cage. Refer to the user manual for installation. | Multiple Mounting Points: Comes with 1/4''-20 and 3/8''-16 threaded holes for connecting accessories such as a 2916 side handle, magic arm with 2070 ball head and a 3/8"-16 top location hole for 2165/3765 top handle and cold shoe that supports microphones and LED lights The cage also Fits the strap 3848 hand strap, PSW2398 wrist strap and PSC2428 shoulder strap. | With HDMI Cable Clamp: The Sony A6700 Cage Kit includes cable clamp that protects ports for stable transmission and allows quick assembly and disassembly with a thumb-scream: If you need to use the headphone jack from the carera, you must remove the HDMI clamp cable first. | Integrated Arca-Switzerland Plate: The built-in quick release plate for Arca-Swiss makes it easy to quickly switch between tripods, stabilizers or handheld devices for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro shooting modes.

For Sony A7C II / A7CR: SmallRig Cage Kit 4422 is designed for Sony Alpha 7C II / Alpha 7CR, which includes a cable clamp for HDMI, protects the camera while facilitating videoing with its multiple accessory mounting points, more conducive to your vlog shooting and travel shooting. | Excellent Handgrip Feeling: Featured with an added hinge arm at the battery compartment, it not only fits the camera curve seamlessly but also significantly enhances the overall handgrip feeling. The ergonomically designed provides a comfortable and secure hold on the camera. | Anti-Twist Design: The full cage fits for Sony A7C II / A7CR so well, locks the camera via one 1/4"-20 screw and one M2.5 screw, which maintains full access to its ports, controls, battery compartment, and provides protection for your handheld shooting. Note: Please remove the strap ring on the camera's right side before installing cage. Please refer to user manual for installation. | With Cable Clamp for HDMI: The Cage kit for A7C II / A7CR includes a cable clamp that protects ports for stable transmission and allows quick assembly & disassembly via a thumb screw. Note: If you need to use the camera's headphone jack, you need to remove the Cable Clamp for HDMI first. | QR Plate for Arca-Swiss: For quick switching among handheld, tripod, and stabilizer shooting scenes, the built-in quick release plate for Arca-type allows you to attach the camera to compatible tripods or for DJI RS series gimbals. It is compatible for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizers as well as for DJI RS 2 / RSC 2 gimbals quick-release plate and Quick Release Plate for Arca-Type 3154. | Multiple Mounting Points: Built-in M4 threaded holes on the bottom front, compatible with Horizontal-to-Vertical Mount Plate 4424, to quickly switch between vertical and horizontal shooting. Built-in 1/4''-20 & 3/8''-16 threaded holes for top handle 3765, side handle 4346; 3/8"-16 locating hole for ARRI for monitor mount 2903B; cold shoe for LED light 4055; a NATO rail for top handle 4345; and a bottom QD socket for mounting shoulder straps.

Compatibility: SMALLRIG Cage for Sony ZV-E10 3531 is designed to provide accessory mounts and protection. The cage is locked via a 1/4"-20 screw at the bottom and further with an included anti-deflection lock to prevent twisting. | Quick Release Plate for Arca-Swiss: The quick release plate for Arca-Swiss on the bottom attaches directly to the tripod for Arca-Swiss type for quick switching among handheld, tripod, and stabilizer shooting scenes. | Maintain Full Access: The cage maintains access to buttons, card slots, battery compartment, and flip screen. With a cut-out slot left at the battery door for dummy battery cable, the camera can be placed flat on the table when using a dummy battery. | Multiple Mounting Points: The cage comes with cold shoe mounts both at the top and the bottom for microphone and LED light. It also features multiple 1/4"-20 threaded holes and 3/8"-16 locating holes for ARRI standard. The bottom threaded holes are designed for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizer quick-release plate (upper) to improve stabilizer shooting experience. | More Thoughtful Details: The cage features rubber cushions on the top and bottom inside to prevent scratches. And it comes with a magnetic flat-head screwdriver for easy disassembly and assembly. | Power Backup Solution: SmallRig NP-FW50 camera battery charger set is available now, two 1030mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FW50 Battery 3818

【FOR SONY A6400/A6300/A6100】The SmallRig Camera Cage 3164 is especially designed for Sony cameras a6400/a6300/a6100 with a removable, non-slip and soft silicone handgrip. | 【MULTIPLE MOUNTING POINTS】The SmallRig Cage with Silicone Handle 3164 features two cold shoes, multiple 1/4"-20 threaded holes and ARRI 3/8"-16 locating holes for attaching the articulating arms, external monitors, microphones or other accessories. | 【SECURE LOCK POINTS & PREVENT TWISTING】This aluminum alloy cage 3164 secures the camera via a 1/4"-20 screw, and a M2.5 screw on the side to prevent twisting. Plus, an optional HDMI Cable Clamp 1693 is separately available to protect the HDMI port. | 【INTEGRATED PLATE FOR ARCA-STYLE】There is an integrated plate for Arca-Type on the cage bottom, and it allows you to mount quickly on a tripod of Arca standard. | 【BUILT-IN SCREWDRIVER】A built-in screwdriver stores on the 3164 cage bottom for quick assembly and disassembly. Also, the mounting surface features rubber pads that hold your camera securely to prevent scratching.

【Safe installation】The cage secures to the monitor via three 1/4”-20 screws, with one on the top and bottom, and one on the back.Features multiple rubber pads inside to prevent the monitor from scratching. | 【Multiple Threaded Holes】Featuring multiple 1/4’’-20 and 3/8’’-16 threads for ARRI allows for mounting accessories such as Magic Arm 2115, Monitor Mount BSE2348 and Wireless Receiver Bracket 2107. | 【Built-in NATO Rails】The bottom features a NATO rail for NATO clamp compatible accessories to quickly release your setup, such as Monitor Mount BSE2385. | 【With Sun Hood】 Dedicated sun hood is included to provide glare protection when shooting outdoor. | 【Work with V Mount Battery】 The backplate is compatible with V-Lock Battery Mount 1846 to attach a V Mount battery.

[Camera Cables Regularize] The camera cable clamp is design to fix disordered cable, facilitates shooting and aviod cable obstruction, it attaches to camera cage, handle, L plate, monitor cage and other accessories through 1/4''-20 screw | [Wide Application] This camera cables lock mount is compatible with 2-7mm diameter cables, one or more cables can be tightly wrapped, such as cable for HDMI , audio cable, power cable, SDI cable, microphone Cable, follow focus cable, etc | [Anti-Release Structure] The universal camera wire clamp is made of highly elastic silicone to tightly clamp the cables, prevent falling off or slip, very safe and reliable | [Easy Unlocking] Snap on connection, quick and easy to open the cover to clip the cable, just one step to lock/unlock. Keep the cable clamp away from strong acid and alkali | [Compact and Lightweight] Only weight 6g, very small to use multiple cable clamps, and easy to carry, convenient storage in the pocket

Dual-Use Cage for Blackmagic Design Cinema 6K：Transform from full to half cage for enhanced versatility. | Enhanced Shooting Flexibility：Diverse built-in interfaces cater to various shooting needs. | Lens Mount Protection：Safeguard your mount with included adapter support. | Comfortable Camera Handling：Enjoy ergonomic ARRI-type top handle for ease of operation. | Flexible Camera Control：Utilize the rotating side handle with slider for versatile camera movements at any angle. | Interface Protection：Safeguard your camera's connections with the HDMI & USB-C cable clamp to prevent signal loss during transmission. | Quick SSD Setup：Swiftly assemble and disassemble with the built-in cold shoe mount on the SSD mount bracket. | Enhanced Stability Package：Includes dual 15mm carbon fiber rods and baseplate for increased stability.

Basic Cage Kit for BMCC 6K: SmallRig 4574 comprises a cage, a lens mount adapter support, a top handle for ARRI-style, an SSD mount bracket, and a clamp for HDMI/USB-C cable. Please note: The cage is exclusively designed for BMCC 6K, NOT for BMPCC 6K or 6K Pro. | Full Cage to Half Cage Convertible: SmallRig 4574 is designed to provide creators with a comfortable low-angle shooting experience, protect the camera, and offer multiple accessory expansion options. This included full cage designed specifically for Blackmagic Design Cinema 6K can be transform from full cage to half cage for enhanced versatility, making it easier to balance when used with a stabilizer. | Three-Point Locking System: Three-point locking system secures the camera via two 1/4"-20 screws at the base and a 1/4"-20 screw on the top, while integrated silicone pads prevent scratching. The cage provides unobstructed access to all camera interfaces, card slots, the flip screen, and the battery compartment. | Versatile Mounting Options: Constructed from protective aluminum alloy, this cage features 1/4"-20 threaded holes, 3/8"-16 threaded holes, locating holes for ARRI, cold shoe mounts, NATO rail, QD mounts, the kit accommodates SmallRig accessories such as Monitor Mount 2903, Side Handle 4015, NATO Side Handle 3847, Baseplate 3357, LED Video Light 3286, Microphone 3468, Rod Clamps and more. | Top Handle, SSD Mount Bracket: The ergonomic top handle for ARRI-type offers creators a comfortable low-angle shooting experience, facilitating camera operation. Additionally, the included SSD mount bracket with a built-in cold shoe mount allows for quick assembly and disassembly, compatible for Samsung T5/T7 SSDs. | Secure Lens Mount Protection & Signal Transmission: The lens adapter support is compatible for Sigma MC-31, for Sigma MC-21, and similar adapters, safeguarding the camera mount from damage. The kit also includes a clamp for HDMI & USB-C cable to protect the camera ports and prevent signal loss during transmission.

ANTI-TWIST: Camera can be secured through the 1/4'' threaded hole on the bottom of the cage. It also features an anti-twist design which can prevent camera deflection. The rubber cushion on the bottom could increase the friction between the cage and the camera | VERSATILE INTERFACE: Comes with multiple 1/4'' threaded holes, 3/8'' threaded holes and 3/8 locating hole for ARRI standard allowing mount of accessories. SMALLRIG Top Handle 1984 can be attached for hand-held shooting. SMALLRIG Cable Clamp can also be added to protect the HDMI cable and port | BUILT-IN COLD SHOE: Features a built-in cold shoe on the top of the cage which is super convenient to mount on SMALLRIG double ballhead mount or mini ballhead mount. SMALLRIG microphone shock mount 1859 can also be attached | QUICK RELEASE: Features a quick release plate for Arca standard on the bottom, so you can directly attach it to the quick release clamp for Arca Standard | What You Get:1 x Cage for Canon EOS R

[for DJI Action 4, Action 3]: SmallRig Camera Cage 4119 is specially designed for Osmo Action 4, Action 3. It provides all-around protection as well as varied mounting points to meet your demands for more professional videoing. | [Compatible for DJI Mic & Original Adapter]: The left side of the cage allows attaching for DJI Mic. The bottom and right side of the magnetic mounts supports the original magnetic quick-release adapter for DJI or SmallRig Magnetic Adapter Mount 3662 for a quick switch between horizontal and vertical modes. | [Quick Lock & Full Access]: With a form-fitting design, it easily secures/releases the camera via a press lock and gives full access to buttons and applying screen proctor. You can replace the battery from the right side without removing the cage. | [Rich Extension]: A cold shoe mount at the top and anti-twist 1/4"-20 thread holes on three sides are available for attaching accessories， such as SmallRig Super Clamp 3757, SmallRig Dual Cup Camera Mount 3566, SmallRig Magnetic Adapter Mount 3662 for time-lapse photography, skateboarding, car shooting, and other scenes. | [Material]: Made of aluminum alloy and silica gel, it is lightweight and solid.

For Sony Alpha 9 III: SmallRig cage for Sony Alpha 9 III 4533 is designed to provide accessory mounts and protect the camera. The streamlined cage design ensures unobstructed button access, providing a more convenient usage experience. | Triple-Point Locking: The camera firmly secures Alpha 9 III via locating pins, a 1/4"-20 screw on the bottom, and an M2.5 screw on the left. A magnetic wrench at the bottom of the cage is accessible at any time for easy disassembly and assembly. | Cable Clamp for HDMI: The dedicated "Rhinoceros" Cable Clamp for HDMI secures the cables with thumbscrews protecting for HDMI ports and ensuring stable data transmission. | Quick Switch Design: Built-in quick release plate for Arca-Swiss at the bottom is compatible with RS 2 / RSC 2 / RS 3 / RS 3 Pro, enabling quick switch between gimbal and tripod shooting. It's also compatible with for Arca-Swiss quick release plate 3154. The strap holes on the left and at the bottom of the cage are compatible with the hand strap (ID: 3848), shoulder strap (ID: PSC2428). | Multiple Mounting Points: Multiple built-in mounting interfaces include 1/4"-20 holes and for ARRI 3/8"-16 locating holes to attach a top handle (ID: 2165C) or side handle (ID: 4016), for ARRI 3/8"-16 locating hole to expand the monitor support (ID: 2903B), cold shoes for microphone or LED video light, QD socket for QD shoulder strap. | Comfortable Grip Experience: The ergonomic handgrip is embedded with first-layer cowhide and matches the camera perfectly. Note: Please remove the shoulder strap ring on the left side of the camera before mounting the cage.