Compact FX6 Cage - SmallRig FX6 Rig Kit is a lightweight and compact cage designed for videographers who prefer shooting on various scenarios such as tripods, handhelds, and shoulder rigs, etc. This complete FX6 cage kit solution provides both protection and attachment points for accessories. | With a Slidable V-Mount Battery Plate - Equipped with a V-mount battery plate and a cable that quickly switches among different scenarios without repeatedly disassembling and installing batteries. The V-mount battery plate supports slide up and down without blocking the memory card and BP-U battery installation. | Both V Mount and BP-U Battery Are Compatible - When using both, please note that the BP-U battery needs to be installed before the V-mount battery when installing, and the V-mount battery needs to be removed before the BP-U battery when uninstalling. | Dual Position Mounting Side Plate - The side plate is compatible with the original control grip when mounted on the rear, making it easy to expand your accessories, such as microphones and image transmitters. When mounted on the front, it can easily balance the center of gravity when shooting vertically. | Multiple Mounting Points - The FX6 cage includes built-in 1/4''-20 locating holes (same as those in the camera), 1/4"-20 threaded holes, 3/8"-16 threaded holes, 3/8"-16 locating holes for ARRI, and a cold shoe mount for the microphone, image transmitter, monitor, etc.

Compatibility: This gimbal extension pole is specifically designed for DJI RS 4 / RS 4 Pro / RS 3 / RS 3 Pro / RS 3 mini / RS 2 stabilizers. Come with a dedicated adapter plate for RS 3 mini. Featuring a 1/4-20" screw at the top for easy installation on the stabilizer base for DJI. | Stable & Secure: The gimbal extension arm includes anti-deflection baffles and anti-slip padding on the top adapter to prevent loosening and falling while shooting at different angles. It also built-in anti-slip sleeve tubing for improved grip. | Lightweight Carbon Fiber: The gimbal extension arm crafted from stong carbon fiber, only weights 0.6lb / 0.27kg, which is more lightweight but has a maximum load capacity of 6kg / 13.2lbs. | Length 15" / 37cm: The length of gimbal extension pole is 15.7" / 37.4cm, and the length of top adapter plate is 2.4" / 6.0cm. When shooting at a low angle, using a pole allows for close-up shots without bending too much and allows for unique perspectives, such as shooting through car windows or from elevated angles. | 1/4-20" Threaded Hole: The bottom of the extension pole is equipped with a 1/4-20" threaded hole for directly mounting on tripod, such as SmallRig mini quick release tripod (ID: 4117).

【Only FOR SONY FX6】SmallRig rosette adapter 3403 is specially designed for Sony FX6 to reposition the original handgrip. Please confirm your model before placing order. | 【EXTENSION CABLE INCLUDED】The package also includes LANC Extension Cable 3404, when connects the camera to the handle, enables the use of the trigger of the original handle. | 【QUICK LOCK DESIGN】The rosette adapter can quickly locks the original grip with the cam lever and does not obstruct it`s rotation. | 【ANTI-DROP DESIGN】The built-in anti-drop design makes it safe and stable. There is a locking mark to ensure correct installation. | 【MULTIPLE USAGE SCENARIOS】Together with the rosette adapter, you can attach your original handgrip onto the gimbal with the M6 screw provided. When using shoulder rigs, you can use the adapter to reposition the handle via optional Extension Arm 1870.

Designed for Sony FX30 / FX3: The FX30 / FX3 handheld cage kit adopts modular design, including a top slider module and a U-shaped cage module. The top slider module is fixed by two 1/4"-20 screws, and can be compatible with the original XLR after disassembly; the U-shaped cage module is fixed by 1/4"-20 screws on both sides and the bottom, which is stable and does not deflect. The kit includes a cage, clamp for HDMI cable , XLR handle extension and wrist strap. | Multiple Mounting Points: The cage includes 1/4"-20 holes to attach Magic Arm 3873; the locating hole for ARRI can attach Top Handle 3765/2165C or Monitor Mount 2903B; the side NATO rail can attach Side Handle 3813; the 1/4”-20 positioning holes on the upper left corner and left side can attach Rod Clamp 3598 for follow focus; two 1/4”-20 holes on the side can attach quick release plate to prevent deflection when shooting vertically; built-in cold shoe can attach microphones, LED video lights. | Quick Release Plate for Arca: The QR plate at the bottom is compatible for DJI RS 2, RSC 2, RS 3, RS 3 Pro, quick release plate (height increase pad) and plate for Arca 3154. Holes for shoulder straps and wrist straps are reserved on both sides and bottom to attach Wrist Strap 3848, Shoulder Strap PSC2428. The bottom QD interface is compatible with QD shoulder straps. The built-in magnetic suction wrench at the bottom is convenient for disassembly and assembly. | Included Handle Extension, Wrist Strap and Cable Clamp: 1. The XLR handle extension adopts ergonomic design, which can extend the XLR handle by 30mm, which improves the grip feeling and increases the mounting points. 2. The wrist strap improves the stability of handheld shooting and prevents the device from slipping during handheld shooting. 3. Equipped with a dedicated clamp for HDMI cable to protect interface to ensure the signal stability during shooting. | Ergonomic design: The position of the battery compartment is designed with an opening and closing wrench, which fits the curve of the fuselage better, solves the problem of placing the little finger and improves the grip feeling. There are built-in protective gaskets on the contact surface with the camera body to prevent the camera from being scratched. | Note: 1. Due to the craftsmanship of manual grinding technology, this is normal situation while there are slight wear trace on the surface; 2. The spacing between the 1/4" holes on the top slider is 27mm, so it is not compatible with accessories with a spacing of 18mm. 3. When using the original XLR handle, please remove the top slider first.

For DJI Selected Gimbal: SmallRig HawkLock H21 Quick Release Mini NATO Rail 4640 is specifically designed for DJI RS 2 / RSC 2 / RS3 / RS 3 Pro / RS 3 Mini / RS 4 / RS 4 Pro. It is conveniently connected to the magic arm and monitor mount. | Quick Release Design: This NATO rail is a quick-release structure, which can be quickly installed with magic arm (ID: 4490), monitor mount (ID: 4637), etc. Additionally, it is compatible with the original accessories for DJI RS 2, such as dual handle. | Installation: The NATO Rail is installed on the left and right sides of the stabilizer through two M4 screws, which is convenient for expanding accessories on both sides of the stabilizer and can also protect the sliders on both sides of the stabilizer to prevent scratches. | Built-in 1/4 Threaded Hole: The mini slider has a built-in 1/4 threaded hole for expanding threaded accessories, and can be connected to Magic Arm 2070B and other adapter monitors, sports cameras, etc. | Material: Made of aluminum alloy, strong and practical. Package includes: Quick Release mini NATO Rail x 2, Allen Wrench x 1.

High Customization: SmallRig Adjustable Camera Monitor Mount 4637 is compatible for DJI RS 2 / RSC 2 / RS3 / RS 3 Pro / RS 3 mini / RS 4 / RS 4 Pro stabilizers, specifically designed for expanding photography equipment on the stabilizer side. It can be used to connect monitor, motion camera, microphone, and other devices on both sides of the stabilizer | 165° Tilt Adjustment: The Monitor Mount can be adjusted up and down by 165 degrees, and can be stopped at any angle. It also has a thumb tighten wrench for a more secure locking. The overall structure of the mount is compact, and when paired with the stabilizer, it gives a stronger overall feeling | Quick Release Design: SmallRig Monitor Mount 4637 adopts the exclusive HawkLock Quick Release design, with a quick release NATO rail that can be easily disassembled by pressing a button with your finger, saving you valuable time and improving shooting efficiency and experience | Anti-Twist Design: The 1/4"-20 screw for connecting the monitor features anti-deflection pin to prevent loosening of the monitor. Built in silicone pad to prevent scratching of the monitor. (Please note: The maximum load is 1.5kg / 3.3lb) | Multiple Mounting Options: The Monitor Mount has three 1/4"-20 threaded holes on the top, which can be used to connect the SmallRig Magic Arm 4194 to a action camera or other rigs. It also has a cold shoe mount that can be attached to a sound receiver, microphone, LED light, etc

Self-Developed Patented HawkLock Quick Release Structure: One-button stable self-locking, smooth sliding, and improved disassembly and assembly efficiency. The quick release cage is also compatible with your existing traditional cold shoe, NATO rail, and for Arca accessories. | Full Access & Anti-Scratch Design: The cage will not affect the use of camera interface, dial, button and the replacement of battery. The battery compartment is equipped with an opening and closing wrench to better fit the body curve, and enhance the body grip. Built-in all-round protective gasket to prevent the camera from scratching. | Three-Point Locking: The camera is locked by the bottom positioning pin, 1/4"-20 screw and the left M2.5 screw, which is stable and does not deflect. The direction of the left locking slider can be adjusted to adapt to different models. The [A7 IV] logo side is suitable for Alpha 7 IV and Alpha 7R V, and the [A7S III] logo side is suitable for Alpha 7S III / Alpha 1 / Alpha 7R IV. The bottom of the cage has a built-in magnetic wrench for easy disassembly and assembly. | Note: 1. After fixing the bottom 1/4"-20 screw, please remove the anti-deflection pin at the battery compartment from the temporary hole and fix it to the corresponding position. 2. When using the side lock, you need to remove the shoulder strap hook on the left side of the camera first. | Multiple Interfaces: 1/4"-20 threaded holes, 3/8"-16 positioning hole for ARRI can attach Top Handle 4483/3765, Side Handle 4485/4015, Monitor Mount 2903B; Built-in 2 HawkLock cold shoe can attach microphones, LED video lights etc.. The bottom HawkLock quick release plate for Arca is compatible with DJI RS 2/RSC 2/RS 3/RS 3 Pro. The wrist strap holes on both sides and the bottom are compatible with Wrist Strap PAC2456B; the QD hole at the bottom is compatible with the QD shoulder strap. | Compatibility: SMALLRIG Quick Release Cage 4481 is designed for Sony Alpha 7R V/Alpha 7 IV/Alpha 7S III/Alpha 1/Alpha 7R IV to provide mounting points and full protection.

【For Sony FX3 / FX30】SmallRig HawkLock Quick Release Half Cage 4772 is specially designed for Sony FX3 / FX30, and is for Sony XLR Handle. This cage maintain the overall original handgrip feeling, and adopting stylish gunmetal gray color, providing lightweight protection for the camera without interfering with the normal use of buttons, card slots, battery compartment, and flipping screen, enhancing shooting safety and experience. | 【HawkLock Quick Release Structure Patent】SmallRig 4772 adopts a modular design, featuring a removable NATO rail, one-button stable self-locking, smooth sliding, and improved disassembly and assembly efficiency. Recommended for use with HawkLock ecological accessories such as SmallRig Top Handle 4483, SmallRig Side Handle 4485, and SmallRig Quick Release Mount Plate for Arca 4486. | 【Secure Lock & Prevent Twisting】This half cage secures the camera via four 1/4"-20 screws to prevent camera deflection, video lens shake, and accidental dropping during shooting. Built in silicone gasket to prevent scratches on the camera. The bottom is equipped with a magnetic wrench for easy disassembly and use. The cage weighs only 3.6 ounces/102 grams, making it lightweight and portable. | 【Multiple Mounting Points】Equipped with 1/4"-20 Threaded Hole, 1/4" -20 Locating Hole, 3/8"-16 Locating Hole for ARRI, QD Socket, Strap Slot, etc., can expand accessories such as SmallRig Magic Arm 2070, SmallRig Microphone 3468, SmallRig LED Video Light 3286B for professional creation, and enjoy personalized expansion experience. | 【Built-in Plate for Arca-Type】The bottom of the cage built-in Quick Release plate for Arca-Swiss, which is for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro gimbal or tripods for Arca type. It can be quickly switched between handheld, stabilizer, and tripod to adapt to different video styles and improve shooting efficiency. | 【Note】1. Please remove the top NATO rail before installing the original XLR handle. 2. When using the top plate, compatible hot shoe accessories include: for Sony ECM-M1 microphone, for Sony ECM-B1M microphone, for Sony HVL-F32M flash, for DJI Mic 2 Camera Adapter. Incompatible hot shoe accessories include: for Sony ECM-W3 /W3S, for Sony ECM-W2BT microphone.

【Designed for Gopro HERO9】 The HERO9 Black cage 3083 is all-in-one full cage which is compatible with microphones, LED lights, providing a perfect vlog filming solution | 【Dual Cold Shoe Mounts 】The HERO9 cage for GoPro has cold shoe mount on top and right side, which you could connect with microphone and led video light at the same time | 【Form-fitting Cage】 The HERO9 Black cage fits the camera very well without blocking the screen, buttons, USB-C port. It supports Max lens replacement | 【Compatible with Audio Adapter】 The original audio adapter can convert the type-c interface into an audio interface and a type-c interface, which you could connect with microphone | 【Quick Installation or Removal】 The audio adapter mount could be quickly installed or removed; After removing the audio adapter mount, the bottom's original holder for GoPro is compatible with the original baseplate

Compatible with Max Lens Mod:The cage supports lens replacement , and it's compatible with the Max lens mod. | Quick Release Button: The cage is locked by pressing the cover and released by pushing the button. | Cold Shoe Mounts: The top and right sides are equipped with two cold shoe mounts that can be connected to accessories such as microphones and LED lights. | Compatible with Original Baseplate:The bottom contains a foldable mount for GoPro compatible with the original baseplate, and a 1/4 threaded hole can also be directly connected to a tripod. | Quick-release Panel: The side panel is a quick-release for battery switches. You can charge the camera through the USB-C port without opening the panel.

Wide Compatibility - This hot shoe cover is compatible with all cameras for FUJIFILM, like for FUJIFILM X100VI X100V X-T5 X-T4 X-T3 X-E4 X-T50 X-T30 X-T30II X-S20 X-S10 XPro3 X-H2s X-H2 GFX100S GFX100 II GFX50SII, etc. | Structure and Materials - The cover shares a similar color palette with the camera and features a sleek beveled design to make it blend in with the camera body, and is anodized with aluminum alloy to enhance its tactile sensation and texture. | Prevent Scratch - Features a built-in soft silicone pad at the bottom to protect the hot shoe from scratches. | Easy to Use - The hot shoe cover can be effortlessly installed by sliding it into the hot shoe socket located on the top of the camera, allowing for easy removal and installation. | Unique Features - The hot shoe cover engraved with sound wave pronunciation for FUJIFILM and the founding year "1934" adds a touch of sentimental tradition unique for Fujifilm brand.

Wide Compatibility - This hot shoe cover is compatible with all cameras for FUJIFILM, like for FUJIFILM X100VI X100V X-T4 X-T3 X-E4 X-T50 X-T30 X-T30II X-S20 X-S10 XPro3 X-H2s X-H2 GFX100S GFX100 II GFX50SII, etc.（This product doesn't compatible with X-T5) | Structure and Materials - The cover shares a similar color palette with the camera and features a sleek beveled design to make it blend in with the camera body, and is anodized with aluminum alloy to enhance its tactile sensation and texture. | Prevent Scratch - Features a built-in soft silicone pad at the bottom to protect the hot shoe from scratches. | Easy to Use - The hot shoe cover can be effortlessly installed by sliding it into the hot shoe socket located on the top of the camera, allowing for easy removal and installation. | Unique Features - The hot shoe cover engraved with sound wave pronunciation for FUJIFILM and the founding year "1934" adds a touch of sentimental tradition unique for Fujifilm brand.

Genuine Leather: Camera Strap 3485 is constructed from genuine leather, the reverse side is a soft suede-like fabric to prevent sweat from staining the clothes after a long time carrying | Classic & Vintage: The leather camera strap is the classic brown design which makes your camera looks a bit more vintage | Secure & Comfort: The neck strap has a fixed length of 43'' with a built-in ring-type attachment system complete with protection flaps to prevent the rings from scratching your camera body. It also features a sliding shoulder padding for comfort | Universal Application: The metal ring fits the cameras with round connection holes or triangle split rings, which makes the strap compatible with all popular camera brands of mirrorless & DSLR cameras like for Canon, for Fujifilm, for Nikon, for Panasonic, for Sony etc | Note: The leather-made camera strap may have natural color deviation. The max payload is 5kg

【ONLY FOR MATTE BOX 3196】SmallRig Lens Adapter Rings Kit (Φ52/Φ55/Φ58/Φ62/Φ86-Φ95) 3383 is an optional accessory that works with Mini Matte Box 3196. It helps connect your camera and filters to the matte box via the threads. | 【FOR ATTACHMENT OF FILTERS】Variable ND filters and CPL filters of up to Φ92.5mm can be screwed on this lens adapter firmly ring through the threads on them. | 【FOR VARIOUS LENSES】This filter adapter rings set 3383 is fully compatible with various lenses, providing an excellent shooting experience for users in terms of quick installation and scene switching. | 【WELL-MADE MATERIAL】This lens adapter rings is constructed of a sturdy and premium aluminum alloy with strong oxygen resistance and quality. | 【SMALLRIG WARRANTY SERVICE】Friendly 24-hour customer support, 30-day no-hassle return service, worry-free 2-year warranty.

【LIGHTWEIGHT CHEST PAD】SmallRig MD3183 is designed for reducing the sense of the weight of long-term handheld shooting, in order to make the shooting process more labor-saving and stable. If you operate your camera in the center front of your body when in handheld mode, you could add this Lightweight Chest Pad 3183 to your 15mm LWS rig for a comfortable stabilizing option. | 【MOUNTS ONTO SEPARATE 15MM LWS RODS】The pad mount features a 15mm LWS rod clamp that can mount onto any standard, separately available 15mm rods, and it can slide back and forth for adjustment along the rods. You can connect the camera through SmallRig 15mm rods such as 851 and SmallRig universal baseplate 1674, support it on the abdomen or chest for shooting. | 【ROTATE UP TO 150°】The rotating structure can be adjusted by 150°, and the damping feeling can be adjusted by the included Allen wrench. | 【SOFT PAD】The chest pad MD3183 is made from durable aluminum and a soft foam rubber pad that presses against your chest for stability and provides a more comfortable experience for long-term shooting. | 【ONE KNOB FOR ADJUSTMENT】An Allen wrench is included to adjust the tension, and a single locking knob allows you to quickly secure or remove the pad from your rig.

Compatibility: SmallRig Top Handle with Cold Shoe 3764 is designed to facilitate low-angle shot and reduce burdens on arms, compatibility for Universal cold/hot shoe mount | Lightweight Only 129g: Hollowed-out design makes it weigh only 129g. Mostly made of aluminum alloy, together with anti-slip and anti-freeze silicone | 5 Built-in Cold Shoe Mounts: It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories | Mounting Points: SmallRig Camera Grip has an abundance of 1/4"-20 and 3/8"-16 mounting points for other accessories. An Allen wrench helps tighten the locking screw, making it easy to assemble and disassemble | Related Products: 3/8"-16 locating holes support Monitor Mount 2903, 2348 to attach monitors; 1/4"-20 threaded holes support Magic Arm 2070 for monitors

Comfortable Ergonomic Grip: The NATO top handle features a silicone part with a 4-finger texture, providing a more comfortable and anti-slip grip. It is designed for easy low-angle shooting and to reduce strain on the arms. | Easy to Use: With the compatibility for any camera cage featuring NATO Rail, the top handle can be quickly mounted on the camera cage via a NATO Rail. The built-in knob helps tighten the NATO clamp making it easy to assemble and disassemble. No extra tools required. | Lightweight and Solid: The handle body is made of aluminum alloy and features a hollowed-out design, which ensures that the handle weighs 124g (0.27lbs) while supporting a weight of up to up to 10kg (22lbs). | 5 Built-in Cold Shoe Mounts: The front of the handle has 3 cold shoe mounts, while the back end has 2, allowing for connection of up to 5 external devices simultaneously, such as LED light, monitor, microphone, transmitter, and more. | 12 Threaded Holes: Ten 1/4" threaded holes and two 3/8" threaded holes for arri could attach more accessories, such as monitor mount 2903B and magic arm 2066B.

Comfortable Ergonomic Grip: The NATO top handle features a silicone part with a 4-finger texture, providing a more comfortable and anti-slip grip. It is designed for easy low-angle shooting and to reduce strain on the arms. | Wide Compatibility: Comes with a 50mm NATO Rail, allowing the top handle to be compatible with any camera cage featuring two 1/4" threaded holes. The handle can slide directly onto the NATO Rail and be secured with the built-in knob, making it easy toassemble and disassemble. | Lightweight and Solid: The handle w/ NATO Rail is made of aluminum alloy and features a hollowed-out design, which ensures that the handle weighs 144g (0.31lbs) while supporting a weight of up to up to 10kg (22lbs). | 5 Built-in Cold Shoe Mounts: The front of the handle has 3 cold shoe mounts, while the back end has 2, allowing for connection of up to 5 external devices simultaneously, such as LED light, monitor, microphone, transmitter, and more. | 12 Threaded Holes: Ten 1/4" threaded holes and two 3/8" threaded holes for arri could attach more accessories, such as monitor mount 2903B and magic arm 2066B.

For ARRI Locating Hole: SMALLRIG Top Handle with Locating Pins for ARRI 4757 is designed to facilitate low-angle shot and reduce burdens on arms. It is compatible with camera cages featuring 3/8"-16 Locating Holes for ARRI on the top. | Extremely Lightweight: Weighs only 113g (4 oz), equivalent to the weight of two eggs. More portable, minimizing your burden when shooting. | High-Strength Engineering Plastic: The handle is encased in high-strength engineering plastic, ensuring a gentle touch even in low-temperature environments to prevent cold hands during operation. | Multiple Mounting Points: The handle is equipped with two cold shoe mounts and a positioning hole for ARRI. That supports Monitor Mount 2905B and 2903B, LED Video Light 3286B, Microphone.

【Sufficient Power Supply】SmallRig LP-E6NH battery 3821, replacement LP E6HN battery for Canon LP-E6NH Battery, comes with two 2040mAh(Real) rechargeable batteries and a charger to brings long battery life for your videos and photos shooting, good power backup solution. If you would like to buy the charger and battery separately, please search SmallRig LP-E6NH Charger 4084(Asin:B0BGXXDXPF) and SmallRig LP-E6NH Battery 4071(Asin:B0BGXTRHNS) | 【Widely Compatibility】SmallRig LP-E6NH battery are fully fits for Canon original camera and charger, fully decoded and no memory effect. They are suitable for Canon R7, R5, R6, R6 Mark II, R, 60D, 60Da, 70D, 80D, 90D, 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 6D, 6D Mark II, 7D, 7D Mark II, BG-E6, BG-E7, BG-E9, BG-E11, BG-E13, BG-E14, C700, XC10, XC15 cameras, and more | 【Multiple Charging Option】This LP-E6NH battery charger has two charging methods: ① use its built-in USB-A charging cable; ② use its USB-C input interface. It allows being charged via USB adapter, car charger, power bank | 【Intelligent LCD Screen】Input: 5V/2.1A, double-slot design can charge two LP-E6NH batteries at the same time. When Charger powered up, you can get all the information of each battery by LCD screen, including charging current, charging voltage, charging progress and charging capacity | 【Safe and Reliable】The LP-E6NH charger designed with over-charging, over-current, over discharge, over-voltage and short-circuit protection ensures reassuring safety. Made by quality fireproof ABS and PC shell frosted to ensure fine touch and durability. Lightweight and compact, can be put in a bag and carried around

【HIGH CUSTOMIZATION】The L-Shaped Wooden Grip 2936 is designed for Sony ZV1 Camera, which provides a comfortable grip and accessory mounts for ZV1. It provides a comfortable grip, cold shoe, and 1/4"-20 mounting threads for accessories. | 【PERFECT PROTECTION】 The L grip secures to the bottom of the camera via a 1/4"-20 screw and features anti-twist flanges to prevent twisting. And Battery door is accessible with this grip attached. Also, it allows flipping the LCD screen and accesses all ports and buttons on the camera | 【THREAD AT BOTTOM】The L bracket provides an additional cold shoe on the bottom lets you attach a microphone or small light. It is ideally suitable for vlogging. Besides, the baseplate features multiple 1/4"-20 threads allows the battery and card changes without unscrewing a shooting handle or a tripod. | 【ERGONOMIC RIGHT HANDGRIP】This right-handed wooden grip is comfortable to hold and helps prevent fatigue when you are shooting for extended periods, and the aluminum base maintains access to the battery door and allows flipping of the LCD screen with no obstruction. | 【ALLOWS VERTICAL SHOOTING】Featuring multiple 1/4"-20 threads on top for extra Cold Shoe Mount 2044 or 2881 so that you can attach light and microphone at the same time which makes vlogger's work much easier. You can also attach the tripod to the right side to shoot vertically. Additionally, it provides strap slots on the side and a wooden handgrip to provide a comfortable grip.

For Panasonic LUMIX S9 - SmallRig L-shape handle 4517 is specifically designed for LUMIX S9 camera to offer enhanced grip. It matches perfectly for Panasonic LUMIX S9, and brings the same texture and color with the camera. | Ergonomic Silicone Grip - This handgrip 4517 comes with a silicone handle, which has been ergonomically designed to ensure a comfortable and secure grip on the camera. | Ultra-thin Design - This grip plate features an ultra-thin design to realize a net weight of only 50g, making this item more compact and lightweight. | Double-Point Lock to Anti-Twist - This L-shape handle is locked via a 1/4"-20 screw and a pin ensuring camera stability. Built-in a flat-head on the base plate simplifies assembly and disassembly. | Integrated Quick Release Plate for Arca - Built-in quick release plate for Arca-Swiss on the base is compatible with tripods for Arca-Swiss. Also, built-in 1/4"-20 threaded holes at the bottom to attach quick release plates for Manfrotto. | Double Strap Holes - Pair the reserved strap hole at the bottom left corner with the camera's upper left shoulder strap hole to install the shoulder strap for convenient vertical shooting. Attaching the strap to the upper right strap hole does not obstruct the use of the camera's LCD screen, while positioning the lens downward effectively guards against impacts.

CUSTOMIZATION & ANTI-SCRATCH: It provides formfitting protection for Canon M50/M50 II/M5 camera and mounts to the camera using a 1/4"-20 screw with rubber cushion on the base plate preventing wiggles or scratches. | VERSATILE MOUNTING POINTS: Designed with cold shoe , 1/4" and 3/8" threaded holes to attach more accessories. Such as, LED lights, microphone and monitor etc. The NATO rails and Locating holes for ARRI on side for handle mounting or other accessory. | ERGONOMIC & DURABLE: The cage is equipped with ergonomically designed grip, compact and practical. The recessed arc-shaped design of the index finger grip makes the grip more comfortable. It is made of ultra-tough and lightweight aluminum alloy, which is resistant to oxidation and scratches. | All BUTTONS UNOBSTRUCTED: Form-fitting design with super CNC cutting technology will not block wifi transfer button, camera hot shoe, camera control buttons, for HDMI/sdi slot and battery compartment. | QUICK ATTACH AND RELEASE: Built-in plate for Arca on the bottom which makes it convenient to directly mount on clamps for Arca. You can achieve quick attach and release, lets you go from tripod to handheld shooting in seconds. The 1/4" and 3/8" threaded holes on the bottom for different tripods or monopods.

【More Stable with Anti-deflection Design】The crab clamp and magic arm feature an integrated anti-deflection design at the connection point, enhancing reliability. It is more reliable than the old version. With no loosening during use, you can focus on your creative work. | 【Designed to Increase Grip Friction】The crab clamp now features a flexible rotating triangular prism friction block, enhancing the grip on flat surfaces. Ideal for clamping on the edge of a table, while also suitable for gripping round tubes like tripods, handheld ring grip, and more. | 【Versatile, Also Easy To Use】Adjust the device flexibly to the desired position with just 1 knob, recommended load capacity of 1.5KG, suitable for small cameras, monitors, lights, webcams, action cameras, microphones, etc. For POV footage. | 【Rock-Solid】The entire kit is made of aluminum alloy and stainless steel, and has undergone rigorous durability and vibration testing. You can confidently add it to your creative tools, making it perfect for photography enthusiasts. | 【Cushions Are Important】There are 4 cushions on the crab clamp and 1 circular rubber pad at the top of the magic arm. These cushions not only increase friction but also protect the equipment and the clamping area from wear. | 【Note】Includes a magic arm clamp kit and an action camera mount. Any inquiries will be responded to within 24 hours, and we offer a two-year after-sales service. Please feel free to use them with confidence.

For SmallRig Phone Case 16 Series - This 67mm attachable filter adapter is designed for lightweight photography case kit for iPhone 16 pro max 4987 and case kit for iPhone 16 pro 4988 | Filter Compatibility - Compatible with all SmallRig 67mm magnetic filters, such as SmallRig 67mm VND magnetic filter 4581, 67mm CPL magnetic filter 4582, 67mm magnetic black mist filter 4583, 5-in-1 magnetic 67mm lens filter kit 4726, etc | Magnetic Design - SmallRig filter adapter 4993 can be installed and removed via magnetic attraction. Enhanced magnetic attraction is safe and reliable, and photographers can quickly and efficiently switch 67mm filters according to different needs for light | Quick Attach and Detach - This filter adapter effortlessly slides onto your phone case, facilitating quick installation and removal without tools | Broad Vision - The hole position of the adapter is designed accurately, which is completely suitable for iPhone ultra-wide-angle lens. It ensures unobstructed lens usage, offering a broader field of view for your photography needs | The package include - 1 x 67mm attachable filter adapter and 1 x user manual

【Designed for DJI Action 4 / 3 / 2 Camera】This Magnetic Adapter Mount is espically designed for DJI Action 4 / Action 3 / Action 2 Camera, which provides a base to quickly connect your camera on to tripod / super clamp directly for multi-angle shooting. It could be used not only with Action 3 / Action 2 camera, but also with SmallRig 3711 for extension usage | 【Mounts via Magnets】The mount 3662 snaps onto the Action 3 / Action 2 or SmallRig aluminum camera cage 3711 for DJI Action 3 / Action 2 using internal magnets, allowing you to quickly mount or remove the camera at any time. | 【Foldable Adapter & 1/4''-20 Threaded Hole】The mount features one 1/4''-20 threaded hole and foldable connector at the bottom that support tripods, or extension arm such as SmallRig 1138 and SmallRig 2066, selfie sticks, suction cups, as well as action camera accessory/system | 【Durable Aluminum Construction】Weights only 28g/1oz, SmallRig 3662 features a solid and reliable aluminum alloy structure, stable and durable to use when shooting | 【Other Related Accessories for DJI Action 2】SmallRig Mount Adapter 3663; SmallRig Cage 3711; SmallRig Filter for Action Camera 3694; Storage Box 3702 | 【Please Note】1. Please note the direction of magnetic poles when attaching Action 2 or camera cage; 2. Please first ensure stable connection before attaching tripods, selfie sticks, etc.; 3. Please do not use the mount in seawater as it is not water-proof or acid and corrosion-resistant

【Versatile Filter Set】Includes a 1/2 black diffusion filter, a 1/2 white diffusion filter, and a CPL filter. Also includes a tempered glass screen protector to safeguard the screen from scratches. | 【Unique 'Small Ear' Design】The mini filters easily pick up fingerprints when handled. We utilize a unique 'small ear' design for easy handling, reducing the likelihood of finger contact with the glass. | 【Multi Coated HD Optical Glass】The filters are made of high-definition glass with a dual-sided coating. This includes nano anti-glare coating, light absorption coating, and anti-smudge, waterproof, and hard-coated AF coating for easy maintenance and added protection against mold, water, and oil. | 【Perfect for Pocket 3】You can change the filter in just 1 second with its magnetic design. Each filter weighs 1.5g, making it lightweight. Its magnetic positioning, weight, and shape are perfectly compatible with the Pocket 3, ensuring convenient storage without any hindrance. | 【What you can do with these filters】1/2 White diffusion filter for soft, dreamy portraits in bright sunlight. 1/2 Black diffusion filter for moody, atmospheric images in low light. And CPL filter for reducing glare and enhancing saturation, perfect for outdoor shooting of water surfaces, skies, skyscrapers, and more. | 【Note】Our filters are not recommended for stacking during photography. Any inquiries will be responded to within 24 hours, and we offer a two-year after-sales service. Please feel free to use them with confidence.

【Versatile Filter Set】Includes a VND2-5 filter, an ND16/CPL filter, and a LPF filter. Also includes a tempered glass screen protector to safeguard the screen from scratches. | 【Unique 'Small Ear' Design】The mini filters easily pick up fingerprints when handled. We utilize a unique 'small ear' design for easy handling, reducing the likelihood of finger contact with the glass. | 【Multi Coated HD Optical Glass】The filters are made of high-definition glass with a dual-sided coating. This includes nano anti-glare coating, light absorption coating, and anti-smudge, waterproof, and hard-coated AF coating for easy maintenance and added protection against mold, water, and oil. | 【Perfect for Pocket 3】You can change the filter in just 1 second with its magnetic design. Each filter weighs 1.5g, making it lightweight. Its magnetic positioning, weight, and shape are perfectly compatible with the Pocket 3, ensuring convenient storage without any hindrance. | 【VND & ND16/CPL Filter for Daytime】A VND2-5 filter includes 5 adjustable stops: ND4 (2 stops), ND8 (3 stops), ND16 (4 stops), and ND32 (5 stops), for controlling exposure in various situations. An ND16/CPL filter combines the functions of an ND filter and a polarizing filter, for controlling exposure, eliminating reflections and enhancing saturation. | 【Light Pollution Filter for Nighttime】Nighttime lights can tint the sky yellow-orange and impact faces. A light pollution filter can significantly reduce this effect. Suitable for urban night photography. | 【Note】Our filters are not recommended for stacking during photography. Any inquiries will be responded to within 24 hours, and we offer a two-year after-sales service. Please feel free to use them with confidence.

Suction Cup & Magnet 2 in 1: Even if the suction cup leaks, the powerful magnets will hold the entire bracket to ensure the safety of the equipment. It can withstand a vertical pull of up to 28kg. Compared to similar products, it boasts a sixfold enhancement, your better choice! | High-Quality Materials: The main body of the product is made of aluminum alloy, which is lightweight and durable, and the silicone base is soft to protect your car's paint, suitable for car doors, roofs, hoods, suitable for cars, boats, motorcycles, gyms, railings and other flat iron surfaces. | Flexible Adjustment: Adopts 360° metal double-ball head magic arm, it can be adjusted to any angle you want. It allows you lock your camera at the best visual angle and capture your best shots. It is your indispensable tool for self-driving travel photography. | Wide Compatible: With 1/4"-20 interface and a adapter mount. Compatible with all action cameras, for GoPro Hero 12/11/10/9/8/7/6/5, for insta360 X3, ONE RS/X, for DJI Osmo action 3/4 camera, for AKASO etc. | Note: SMALLRIG 4466 magnetic suction cup mount for flat iron surfaces (use 3566, 4193 for pure glass surfaces.); Recommended for load bearing up to 0.35kg (for small cameras); Recommended for a maximum speed of no more than 120km/h; Recommended to bring your own safety rope; | More Products From SMALLRIG: Cage 3084C, 3083C for GoPro, Cage 4088B for insta360 X3, Cage 4119B for DJI Action 4; The same type of suction cup mount is also available as mounts 3566, 4193, 4347, 4275.

【Versatile Filter Set】Includes ND8, ND64 and ND256, catering to diverse lighting environments. Also includes a tempered glass screen protector to safeguard the screen from scratches. | 【Unique 'Small Ear' Design】The mini filters easily pick up fingerprints when handled. We utilize a unique 'small ear' design for easy handling, reducing the likelihood of finger contact with the glass. | 【Multi Coated HD Optical Glass】The filters are made of high-definition glass with a dual-sided 22-layer coating. This includes 8 layers of nano anti-glare coating, 10 layers of ND light absorption coating, and 4 layers of anti-smudge, waterproof, and hard-coated AF coating for easy maintenance and added protection against mold, water, and oil. | 【Magnetic design and Compatibility】With the magnetic design allowing for rapid filter changes in just 1 second, lightweight (1.5g each) and designed to work perfectly compatible with Pocket 3 without hindering gimbal storage. | 【Shot Like a Pro】Through the ND Filter, you can reduce overexposure in bright environments. Set your gimbal to M mode, adjust the ISO and shutter speed to create a cinematic motion blur effect, ideal for capturing flowing water, waterfalls, and moving vehicle wheels, just like a pro. | 【Note】Includes a ND8, a ND64, a ND256 filter and a screen protector. Any inquiries will be responded to within 24 hours, and we offer a two-year after-sales service. Please feel free to use them with confidence.

Preserve Exposure Balance: SmallRig Matte Box Kit With CPL&VND Filters 5011 is designed for mirrorless camera video shooting, maintaining depth of field while adjusting external light flux to preserve exposure balance and prevent glare and flares from sunlight or other strong light sources | Full Focus HD: The filters utilize imported high-definition glass with a 22-layer dual-sided coating technology, providing highly accurate color reproduction and minimal color distortion within the 350-700nm wavelength range | No Dark Cross Shadow: The VND features 2-5 stops with infinite adjustment. Incorporated hard stop and light transmission limit technologies effectively eliminate VND cross patterns | Magnetic Attraction Design: The VND filter frame features dual CPL+VND filter functionality with a magnetic attachment for various CPL and VND combinations. You can also choose to purchase black diffusion filter kits (ID 4650, 4652) and ND filter kits (ID 4799) are available to meet all your needs | Quick Release Design: SmallRig matte box kit adopts modular design, the VND filter frame features an automatic locking system that can be quickly released with a single press | No Vignetting: With its lightweight and slim design and front-mounted lens compatibility, it achieves attaching ≥16mm focal length without vignetting (while using with full-frame camera and lens setups). This kit also includes four common threaded adapters (Φ67-95mm; Φ72-95mm; Φ77-95mm; Φ82-95mm) and a 4x5.65" filter frame to cater to different lens and filter specifications | Please Note: 1.Compatible only with SmallRig ID 3556, 3645, 3641, 3646. 2.The filter frame's inner lens-mounted design is compatible with a wider range of focal lengths. 3.When combining CPL1 with CPL2/CPL3 to form VND, ensure alignment points are within the VND range line. 4.CPL filters, ND filters, and softboxes are directional and need to be installed with the logo facing outward

Adjustable Clamp from 67mm to 82mm - SmallRig matte box 4409 featured a distinctive adjustable clamp design, range from 67 to 82 mm (2.6" to 3.2"), this matte box ensures extensive compatibility with a wide array of popular mirrorless and cinema lenses | Quick-release Design - This matte box showcases a three-point locking system, to swift assembly and disassembly by pressing the push rods on both sides of the clamp and a locking knob on top | No Vignetting - With its slim design, it accommodates circular and square filters seamlessly, ensuring no vignetting at focal lengths ≥16mm (for full-frame cameras and lenses), reducing glare effectively in challenging conditions. Additionally, you can meet your diverse filter needs for video and photo shoots by selecting from optional CPL, ND (ID: 4799), VND (ID: 4649), Black Diffusion Filter Kit (ID: 4650), and White Diffusion Filter Kit (ID: 4652). Not compatible with 4x4" slide-in filters | Note 1: If the external diameter of the mirrorless lens is greater than 88mm or the cinema lens diameter is greater than 85mm, this matte box cannot be installed | Note 2: A list of non-compatible micro and cinema lenses is detailed in the pictures, and instructions for using different filters are detailed in the manuals | Note 3: Before use, remove the UV filter from the front of the lens, and ensure that the top locking device is securely fastened, do not operate without the top knob securely locked

Adjustable Clamp from 67mm to 82mm - SmallRig matte box 4411 features a unique adjustable clip-on design with a clamp range of 67-82mm(2.6" to 3.2"), offering wide compatibility with popular mirrorless and cinema lenses | Quick Release Design - This matte box features a three-point locking system, allowing for quick assembly and disassembly by simply pressing the push rods on the sides of the clamp and the locking knob on top | No Vignetting - The slim design accommodates circular and square filters seamlessly, ensuring no vignetting when the focal length is ≥16mm (suitable for full-frame cameras and lenses), effectively reducing glare in challenging conditions. Note: not compatible with 4 x 4" slide-in filters | Versatile Filter Set - The filter set features magnetic attachment for seamless combination, offering dual CPL and VND filter functionality. The VND provides an adjustable range of 2-5 stops, complemented by hard stop limits and light transmission control technology to effectively eliminate the VND crosshatching effect | Full Focus HD - Crafted from imported high-definition glass and featuring 22-layer dual-sided coating technology, this filter guarantees superior color reproduction and ultra-low color deviation across the 350-700nm wavelength range | Dust-Proofing and Protection - The package includes dust-proof caps and lens covers, offering a convenient dust protection experience while also safeguarding your equipment | Note: Before use, remove the UV filter from the front of the lens, and ensure that the top locking device is securely fastened, do not operate without the top knob securely locked. Additionally, if the external diameter of the mirrorless lens is greater than 88mm or the cinema lens diameter is greater than 85mm, this matte box cannot be installed; A list of non-compatible micro and cinema lenses is detailed in the pictures, and instructions for using different filters are detailed in the manuals | Note: VND is not clearly marked with a gear; CPL1 is used in combination with CPL2/CPL3 to form VND, please make sure that the alignment point is within the VND gear line; CPL filters, ND filters, and soft filters are directional, so please install them with the product information side of the logo facing outwards; CPL filters can also be used separately

【STYLISH & THIN】CNC integrated molding, SmallRig Memory Card Case 2832 is an auxiliary product for photography enthusiasts. | 【COMPATIBILITY】It can store three SD Cards and two Micro SD Cards, which is convenient for storing the memory cards of cameras, action cameras, drone, and mobile phones. | 【ANTI-FALL & SCRATCH RESISTANCE】Each memory card has an independent safe space, which can quickly and safely slide into the card slot for storage. | 【EASY TO STORE】The memory card case also comes with a SIM card holder and a SIM card tray pin, which is convenient for you to change the mobile phone card when you go abroad or when business needs. Weighs only 45g, it's compact and easy to store. | 【PULL-OUT STRUCTURE】It uses a brand-new pull-out structure to facilitate quick access to internal items. It is convenient and fast card removal. The outer shell is made of hard aluminum alloy, and the inner case is made of ABS+PC material.

Stylish & Lightweight: SMALLRIG Memory Card Case 4107 is CNC integrated molding, weighs only 45g, not only stylish and thin but also anti-scratch. An auxiliary product for photography enthusiasts | Compatibility: SD Cards Case 4107 can store two CFexpress Type-A Cards, two SD Cards, and four Micro SD Cards, which is convenient for protecting and carrying the memory cards of cameras, action cameras, and drones | Anti-Fall & Scratch Resistance: Each memory card has an independent safe space, which can quickly and safely slide into the card slot for storage | Pull-out Structure: It uses a brand-new pull-out structure to facilitate quick access to internal items. It is convenient and fast for card removal. The outer shell is made of hard aluminum alloy, and the inner case is made of ABS+PC material | Easy to Store: Card slots with printed names of compatible cards are for quick identification. It's compact and easy to store

Universal Phone Holder: This multifunctional phone clamp can be mounted on the top of a camera through cold shoe, and can also be mounted on a tripod throught 1/4"-20 holes at the bottom for photography, live-streaming, vlogging, interviews, etc | Support Landscape and Portrait Modes: The phone holder can be quick switching between landscape and portrait modes, and securely lock when rotated to 90° degrees. Two rotary joints supports 180 degrees adjustment | Universal Compatibility: It supports smartphones with a width of 57-88mm / 2.5-3.5in (for Samsung, for iPhone 15/15 Pro /15 Pro Max / for iPhone 14/14 Pro /14 Pro Max / for iPhone 13 /13 Pro /13 Pro Max / for iPhone 12 Pro Max and so on) | Threaded Holes & Cold Shoe: Designed with well-spaced threaded holes to facilitate the installation of power bank holders (ID: 2336 / 2790). There is a cold shoe mount on top for microphone or light | Package Included: phone holder x 1. Please note that the load capacity is 500g

【Micro-Cable Connectivity】The D to A HDMI cable 3042B offers you a convenient way to optimize your viewing. Connect digital cameras, camcorders, tablets, or other micro Cable-eabled devices to the port on most displays to enjoy the high-definition audio and video. | 【Ultra Thin & Flexible】The ultra-thin and flexible high-speed HDMI cable (35cm/1.15ft) with 3.6mm diameter fits perfectly in tight spaces, designed for gimbal, camera stabilizer, and rigs applications where flexibility and compact cable routing is required. | 【High-Speed Cable】Ultra thin 2.0 version standard HDMI cable supports Ultra HD 4K@60Hz, Full HD 1080P, 3D, Ethernet, Audio Return Channel(ARC), HDR, and you can transmit high-resolution sound formats. | 【4K@60Hz video output】The HDMI cable fully supports 4K resolution at 60Hz and 2K resolution at 165Hz with life-like color. You can enjoy big screens and true-to-life 4K visuals for the ultimate visual experience. | 【What you can get】The package include 1 x HDMI cable, 1 x Cable tie and professional after-sales service. Come with a cable tie for cable management to make your rig neat. If you have any questions, please feel free to contact us.

【WIDELY USAGE】SMALLRIG Mini Ball Head 2795 is designed to attach video accessories to the camera, such as microphones, LED lights, monitors, action cameras. The ballhead adapter works for most cameras. | 【ADJUSTABLE DIRECTION】The ball head is capable of 360° panning and 135° tilting. A single thumbscrew is applied to adjust the tightness for quickly lockup. | 【REMOVEABLE COLD SHOE】The ball head features a 1/4''-20 thread hole on the bottom enables to attach a mini tripod after removing the cold shoe adapter. | 【STURDY AND STABLE】The bottom locking plate features built-in slots that allow to secure with allen wrench to ensure safe. | 【1.5KG LOAD CAPACITY】The ball head weighs only 45g and has a load capacity of 1.5kg. With rubber-padded mount on the top to protect your camera from potential scratches between your camera and the mounting part.

【C to A connectivity】 The C to A cable offers you a convenient way to optimize your viewing. Connect digital cameras, camcorders, tablets, or other micro cable-enabled devices to the port on most displays to enjoy the high-definition audio and video. | 【Ultra Thin & Flexible】The ultra-thin and flexible high-speed cable (35m/1.15ft) with 3.6mm diameter fits perfectly in tight spaces, designed for gimbal, camera stabilizer, and rigs applications where flexibility and compact cable routing is required. | 【High-Speed Cable】Ultra thin 2.0 version standard cable supports Ultra HD 4K@60Hz, Full HD 1080P, 3D, Ethernet, Audio Return Channel(ARC), HDR, and you can transmit high-resolution sound formats.ll HD 1080P, 3D, Ethernet, Audio Return Channel(ARC), HDR, and you can transmit high-resolution sound formats | 【4K@60Hz video output】The cable fully supports 4K resolution at 60Hz and 2K resolution at 165Hz with life-like color. You can enjoy big screens and true-to-life 4K visuals for the ultimate visual experience. | 【What you will get】1 x Cable，1 x Cable tie

Two Selectable Installation Methods: SmallRig Mini Side Handle Kit 4816 is designed to reduce arm burden during shooting, assist in stable shooting, and provide an accessory expansion interface. The kit includes a handle, a NATO clamp and a double 1/4"-20 screws handle adapters, which can be used in combination according to different needs. | Highly Versatile: The handle can be adapted to the left and right sides of the cage, can be flexibly installed on the left and right sides, and supports up and down adjustment. According to your personal preference, you can choose the most comfortable holding and shooting method. | Multiple Mounting Points: There are three 1/4"-20 threaded holes on the top of the handle to expand accessories such as magic arms, microphones, and LED light. There are wrist strap holes on both sides of the handle to connect wrist straps to increase hand-held stability. The kit also includes a cold shoe mount that can be expanded with other devices as needed. | Ergonomic Design: This handle is ergonomically designed, with a silicone patch embedded in the handle, which is comfortable to hold and has anti-slip and anti-freeze functions. The bottom has a built-in magnetic wrench that can be used at any time for easy disassembly and installation. Maximum load-bearing capacity is 6kg. | Note: This Handle Kit can also be adapted to the cage with built-in NATO rail. If you do not have a cage with built-in NATO rail, it is recommended to use it with SmallRig NATO rail 1409 or 2172 for conversion.