【FOR SONY RX100 VI & RX100 VII】SMALLRIG Cage for Sony RX100 VII and RX100 VI Camera CCS2434 is designed to provide protection and accessory mounts for RX100 VII/VI users | 【REMOVABLE WOODEN SIDE HANDGRIP】An ergonomic wooden right-side handgrip provides a comfortable gripping surface. Additionally, this cage increase the space between grip and lens to ensure comfortable when holding. Please noted that if you have a AGR2 handgrip, please remove it before installing the camera in the cage. | 【MOUNTING POINTS】It features a variety of 1/4"-20 accessory threads around the cage and comes with six 1/4"-20 tripod threads on the bottom. This allows you to mount accessories such as SmallRig Top Handle 1638, Magic Arm 2070 for monitor and other camera related accessories. Also, the formfitting cage features a cold shoe on the top and right side for microphone or light which makes vlogger’s work much easier | 【BUTTON ACCESSIBLE】The cage secures around the lens mount via a M5 screw which maintains access to the battery door. Without impeding access to your camera's functions, displays, ports, or battery, the cage does not block or cover any important sections of the camera | 【LIGHTWEIGHT AND COMPACT】Made by Aluminum Alloy and Wood, it weights only 123g, very sturdy and lightweight, which will bring more comfortable shooting experience | 【Related Product】If you would like to control your camera by remote, you could search "SmallRig SR-RG1 Remote Shooting Grip 3326"

Versatile and Compact Design: SmallRig V-mount battery plate 4063B adopts L-shaped design, which integrates quick release plate for Arca-Swiss, V-mount battery plate, stretchable rod and 1/4"-20 threads to realize quick installation and adjustment of camera and battery. Through the 1/4"-20 threads connected to the dual 15mm rods and quick release chest / abdomen support system to reduce the burden and ensure more stable handheld shooting. | Stretchable Baseplate: The baseplate of this V-mount battery plate is stretchable, and the maximum stretchable distance is 36.5 mm / 1.43 inch, which meets the needs of cameras of different sizes and improves the compatibility. Locking and releasing the rod is realized by a toggle lock, which is fast and time-saving without the needs of tools. | Widely Compatibility: This V-mount battery plate is very versatile and universal, it is suitable for most camera models on the market, for Mirrorless / DSLR cameras less than 111mm thick, like for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 7C / FX3 / FX30, for Canon EOS R5C / R5 / R6 / R6 Mark II / R7 / R10 / R / RP, for Panasonic LUMIX S1H / S1R / S1 / S5 / S5 II / GH6 / GH5. | Double Quick Release Plate for Arca-Swiss: It comes with two QR plates for Arca, one can be mounted on the bottom of the camera or cage to give them quick release functionality. The other can be mounted on the bottom of the plate as you require it to enable quick switching among handheld, stabilizer, and tripod shooting. If you don't need a QR plate for Arca, then you can use the 1/4"-20 and 3/8"-16 threaded hole on the bottom of the plate to mount the quick release plate you need, such as for Manfrotto etc. | Smart Rotatable Design: The V-Mount plate can be rotated and adjusted by 180°. Adjust forward for convenient storage, adjust backward for enough space to open the camera flip screen. This rotating design does not require you to remove the battery first, which effectively saves time. And it also with pivot dampening preventing your device from falling. | Expand Your Creativity: This V-mount battery Plate has a mini V-mount plate with 1/4 "-20 threads, which makes this V-mounted battery plate compatible with NP-F battery adapter plate(ID:3168B) and power bank holder(ID:BUB2336), thus realizing more diversified battery solutions.

Versatile and Compact Design: SmallRig V-mount battery plate 4505 adopts L-shaped design, which integrates V-mount battery plate, stretchable rod, 1/4"-20 and 3/8"-16 threads to realize quick installation and adjustment of camera and battery. The built-in mount clamp for Arca supports any SmallRig cages with QR plate for Arca. Folding and lightweight design, only 113.5 mm x 30 mm, 199g, easy to store and carry round. | Stretchable Baseplate: The baseplate of this V-mount battery plate is stretchable, and the maximum stretchable distance is 36.5 mm / 1.43 inch, which meets the needs of cameras of different sizes and improves the compatibility. Locking and releasing the rod is realized by a toggle lock, which is fast and time-saving without the needs of tools. | Widely Compatibility: This V-mount battery plate is very versatile and universal, it is suitable for most camera models on the market, for Mirrorless / DSLR cameras less than 111mm thick, like for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 7C / FX3 / FX30, for Canon EOS R5C / R5 / R6 / R6 Mark II / R7 / R10 / R / RP , for Panasonic LUMIX S1H / S1R / S1 / S5 / S5 II / GH6 / GH5. | Smart Rotatable Design: The V-Mount plate can be rotated and adjusted by 180°. Adjust forward for convenient storage, adjust backward for enough space to open the camera flip screen. This rotating design does not require you to remove the battery first, which effectively saves time. And it also features pivot damping to prevent equipment from falling. | Expand Your Creativity: The Built-in 1/4"-20 and 3/8"-16 threaded holes on the bottom enable to mount the quick release plate you need, such as for Arca-Swiss and for Manfrotto etc. | NOTE: This is the Lite Version of SmallRig V-mount battery plate. Quick release plate for Arca-Swiss and mini V-mount plate are not included in the packing list.

Versatile and Compact Design: SmallRig V-mount battery plate 4064 adopts L-shaped design, which integrates quick release plate for Arca-Swiss, V-mount battery plate, stretchable rod and 1/4"-20 threads to realize quick installation and adjustment of camera and battery. Folding and lightweight design, only 117 mm x 31.5 mm, 230g, easy to store and carry round. | Stretchable Baseplate: The baseplate of this V-mount battery plate is stretchable, and the maximum stretchable distance is 36.5 mm / 1.43 inch, which meets the needs of cameras of different sizes and improves the compatibility. Locking and releasing the rod is realized by a toggle lock, which is fast and time-saving without the needs of tools. | Double Quick Release Plate for Arca-Swiss: Its bottom is equipped with a 1/4 "-20 and 3/8 "-16 quick release plate for Arca-Swiss, which can quickly switch among handheld shooting, gimbal shooting and tripod shooting. And the included quick release plate for Arca-Swiss allows the camera to be quickly connected to the kit. | Not Block Camera Screen: You can flip the V-mount battery plate down 90 degrees through the thumb lock on the side, so that you have enough space to open the camera flip screen. This rotating design does not require you to remove the battery first, which effectively saves time. And it also with pivot dampening preventing your device from falling. | Variety of Power Solution Options: This V-mount battery Plate has a mini V-mount plate with 1/4 "-20 threads, which makes this V-mounted battery plate compatible with NP-F battery adapter plate and power bank holder, thus realizing more diversified battery solutions.

【Compact and Convenient】SmallRig Aluminum Mini Tripod VT-20 4289 is the perfect mini tripod for compact DSLRs, mirrorless cameras, smartphones, action cameras and other devices. Its foldable aluminum alloy legs and center column design allow for compact storage, making it only 18cm/7 inches in length and weighing under 700g/1.5lbs. | 【Effortless Adjustments】Utilizing a 5-section leg design and a quick tightening mechanism, this mini tripod allows for quick and easy height adjustments, with a working height range of 17cm/6.7in to 52cm/20 in. | 【Versatile Shooting Angles】The travel tripod has a quick angle adjustment lever, offering three angle options (23°/50°/80°) to meet different shooting angle demands. The center column can be disassembled and installed in reverse, providing more shooting perspectives. | 【360-degree Ball Head】The ball head for Arca-swiss provides 360° panoramic movements and a 90° notch for vertical shooting scenarios, allowing you to take photos at any angle with horizontally and vertically. And it can support a maximum load of 6kg/ 13.2lbs. | 【Expandability & Package Includes】The tabletop camera tripod has a 1/4"-20 threaded hole that are compatible with accessories such as magic arms, allowing for the attachment of microphones, monitors, and other transmission devices. The package includes a tripod*1, allen wrench*1, smartphone holder*1, hook*1, and user manual*1.

New Upgrade: The upgraded wireless control side Handle 4402B offers infinite rotation, securely locking at any angle with dependable and long-lasting damping, ensuring sustained use without loosening. | Wireless Remote Control Module: The handle has a built-in wireless remote control module, which can control the start and end of taking pictures and recording with most native cameras of Android/iOS systems within a distance of 10 meters, boosting efficiency in mobile photography and videography. | One-Second Disassembly and Assembly: The quick-release adapter of the handle can be quickly connected to all SmallRig SmallRig H11 universal & dedicated quick release cages for smartphones(SMALLRIG Cage for iPhone 15 Series; for Xiaomi 14 Ultra 4733; for Samsung Galaxy S24 Ultra 4601 and Universal cage 4299 and so on), allowing you to start shooting smoothly. | Switchable between Top Handle and Side Handle: By connecting the handle adapter to the horizontal slot of the cage, the side handle can be converted into a top handle, adapting to more shooting scenarios. The hex wrench is magnetically fixed to the bottom of the handle and locked with a decorative cover, making it stable and portable. | Built-in Cold Shoe: After disassembling the wireless remote control module, the handle's built-in cold shoe can be used to connect an external microphone or LED video light, making mobile phone shooting more professional. | Comfortable Grip: The rotating side handle enhances grip comfort and stability for a range of shooting angles, greatly improving the shooting experience and efficiency

Widely Compatible Lenses: SmallRig Wireless Follow Focus Kit (Lite) 4296 is designed to provide a precise and low-latency focusing experience for video shooting. It is compatible with a wide range of cinema and zoom lenses with high damping, such as CP. 3 35mm for ZEISS, Arles 50 / 75mm F1.4 FF / VV for DZOFilm, CN-R35 T1.5 L F for Canon, FE C 16 - 35mm T3.1 G for Sony lens, etc | Peak Torque of 4.3 kgf.cm: The receiver motor adopts a variable speed gear set design, which can provide a high torque output of 4.3 kgf.cm. Compared with the previous generation product, the torque peak is increased by more than 2 times, and the response efficiency is increased by 35%, making it easy to drive the zoom lens | Up to 21H Battery Life: The handwheel is equipped with a built-in 1400mAh battery and adopts smart sleep tech for long-lasting power, which can provide about 21h of ultra long battery life. The Receiver Motor supports a wide voltage input range of 5V-18V, compatible with PD and QC fast charging protocols. Please use the provided power cord or a USB 3.0 cable to avoid insufficient torque issues | User-Friendly Design: The wireless follow focus kit uses two light colors, red and blue, to indicate the connection status and channel (blue light-F00-1; green light-F15-1), and provides intuitive operation instructions. The control is simple and efficient, making it easy for beginners to get started | One-Click Lens Calibration: The Handwheel supports one click A/B dotting, and you can adjust the appropriate A/B focal length according to your shooting needs. The kit features a memory storage function, eliminating the need to recalibrate lens travel and AB point settings in case of power loss, enhancing shooting efficiency

Low Latency and Precise Control: SmallRig Wireless Receiver Motor (Lite) 4297 is designed to provide a high torque, low latency autofocus shooting experience, and it supports cross-control with the Magic FIZ system, providing users with more options for adapting to different lenses | Peak Torque of 4.3 kgf.cm: The receiver motor adopts a variable speed gear set design, which can provide a high torque output of 4.3 kgf.cm. Compared with the previous generation product, the torque peak is increased by more than 2 times, and the response efficiency is increased by 35%, making it easy to drive the zoom lens | Streamlined Control: The Wireless Receiver Motor 4297 features red and blue indicator lights to signify connection status and channel (blue light - F00-1; green light - F15-1), offering intuitive and user-friendly operation guidance for simple and efficient control. When the Handwheel Controller and Receiver Motor lights (blue and green) match, it indicates a successful automatic connection | PD + QC Fast Charging: The receiver motor Operating within a wide voltage input range of 5V-18V and supports PD + QC fast charging protocols. Please use the provided power cord or a USB 3.0 cable to avoid insufficient torque issues | Please Note: 1. The blue light (F00-1) and green light (F15-1) can be interchanged for use with MagicFIZ Wireless Follow Focus Basic Kit (ID: 3781). 2. Prolonged high torque zooming may result in the motor surface heating up, which is a normal phenomenon. 3. In the event of abnormal motor rotation, please refer to the user manual for instructions on performing a controller reset operation. 4. A flashing red light indicates a low battery or abnormality. Please address any problems promptly

For Select Cameras: The SmallRig 3902 Wireless Remote Control for select Bluetooth enabled digital cameras for Sony, for Canon and for Nikon is a Bluetooth remote shutter release that starts and stops video recording. This reduces post-production time. | 32.8ft / 10m Range & Pairs Instantly: This wireless remote control featuring a fast and reliably Bluetooth connection that enables transmission within a 32.8ft / 10m range. Once paired, it will automatically connect the camera the next time you turn it on. | Mode Switch: SmallRig wireless remote control 3902 has STILL and MOVIE two mode. In STILL mode, press the button halfway for automatic focus and all the way down for taking pictures; In MOVIE mode, do a full press to turn on/off recording, meet different shooting scenarios. | Multiple Mounting Solutions: This wireless control comes with a detachable cold shoe clamp at the bottom to quickly mount to a cold shoe mount or your collar. Remove the clamp and it can be locked to such accessories as Side Handle 3260, Top Handle 2165C, etc. via the 1/4"-20 screw in the box. | Special Design: Its shape is ergonomically designed for added comfort and grip. Its silicone bottom helps prevent deflection, while the screw features an anti-lost design. | Wide Compability: for Sony: Alpha 7R V / Alpha 7R IV / Alpha 7R III / Alpha 7 IV / Alpha 7 III / Alpha 7S III / Alpha 7C II / Alpha 7C / Alpha 7CR / Alpha 9 II / Alpha 9 / Alpha A1 / FX3 / FX30 / Alpha 6700 / Alpha 6600 / Alpha 6100 / Alpha 6400 / ZV-E1 / ZV-E10 / ZV-E10 II ZV-1 II / ZV-1 / ZV-1F / DSC-RX100 VII; for Canon: EOS R5 / R5 II / R6 Mark II / R6 / R7 / R8 / R10 / R / RP / R50 / M6 Mark II / M50 / 90D; for Nikon: Z50 / Zfc / Z30

【HIGH CUSTOMIZATION】SmallRig Wooden Mini Side Handle 2913 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 1/4"-20 screws are fixed to the side of your camera cage. SmallRig 2913 is compatible with any cages featuring two 1/4"-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2087, 2808, etc. | 【ERGONOMIC DESIGN】Made of aluminum alloy and rosewood with ergonomic design, the portable handle provides filmmakers with smooth and comfortable shooting experience. ( Note: Deviation of wood grain color and stripe is normal. ) | 【FOR RIGHT-HAND OR LEFT-HAND USE】The SMALLRIG Mini Handle 2913 supports you to switch from left-handed to right-handed quickly through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning. | 【MOUNTING OPTIONS】The flash and microphone can be mounted through the cold shoe, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off. | 【LIGHTWEIGHT & PORTABLE】It weighs only 142g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. ( Note: The maximum bearing capacity of the handle is 3.5kg. Please do not overload. )

Compatibility: This L-shaped grip is custom-designed for FUJIFILM X100VI and X100V cameras. The handgrip is fastened using a single 1/4"-20 screw located at the bottom. It matches the texture and color scheme of the camera body, fitting seamlessly when mounted. | Ergonomic Silicone Grip: The hand grip 4555 features a built-in ergonomic silicone handle that improves grip and provides a comfortable handheld experience. Silicone material is also integrated into the bottom to prevent scratches on the camera body. | Integrated Quick Release Plate for Arca: The grip includes quick release plate for Arca at the bottom to quickly switch to tripod shooting. Four 1/4"-20 threaded holes at the bottom also support tripods and QR plates for Manfrotto, etc. | Compact and Lightweight: This grip plate features an ultra-thin design to realize a net weight of only 82g, enhancing its compactness and lightness. | Unique Features: Including a hot shoe cover engraved with Fuji's sound wave pronunciation and the founding year "1934" adds a touch of sentimental tradition unique for Fujifilm brand. Additionally, the included shutter button enhances the tactile experience of pressing the shutter. | Notice: To prevent friction between the camera and the plate, a protective silicone pad is affixed to the left side of the baseplate which Leaving a small gap to ensuring additional protection for the camera.

Designed for FUJIFILM X100VI: The X100VI cage is designed to protect the camera and provide multiple expansion interfaces to facilitate content creation. The expansion frame does not interfere with the normal use of the camera buttons, card slots, LCD screen, MCS switch, battery, etc. | Multiple Mounting Points: The cage includes multiple 1/4"-20 threaded holes, 3/8"-16 locating holes for ARRI, cold shoe mount, strap hole, etc. It is also compatible with Top Handle 3765, Microphone 3487, LED Video light 3286B, Wrist Strap 3848, etc. | Integrated Quick Release Plate for Arca: The retro cage includes a quick release plate for Arca at the bottom to quickly switch to tripod shooting. There is a built-in double-headed wrench on the bottom for easy disassembly and assembly. | Shutter Release Button and Hot Shoe Cover Included: The cage comes with the exclusive hot shoe cover imprinted with the unique sound wave design for FUJIFILM and the foundation year for FUJIFILM. It also includes a shutter release button to ensure a soft and comfortable finger touch. | Ergonomic Design: The built-in ergonomic wooden handle provides a comfortable handheld shooting experience for video creators. | Note: 1. Please remove the D-ring on the left before installing the cage. 2. Due to the hand-polished surface of each cage, there may be slight differences between products, which is normal.

Compatibility: SmallRig L-Shape Mount Plate with Silicone Handle Sliver 4875 for FUJIFILM X-M5 is designed to improve the camera grip. The handgrip is fastened using a single 1/4"-20 screw located at the bottom. It matches the texture and color scheme of the camera body, fitting seamlessly when mounted. | Ergonomic Silicone Grip: The hand grip 4875 features a built-in ergonomic silicone handle that improves grip and provides a comfortable handheld experience. Silicone material is also integrated into the bottom to prevent scratches on the camera body. | Integrated Quick Release Plate for Arca: The grip includes quick release plate for Arca at the bottom to quickly switch to tripod shooting. Four 1/4"-20 threaded holes at the bottom also support tripods and QR plates for MFT, etc. | Included Windshield with Cold Shoe Mount : Comes with a windshield with built-in cold shoe mount, which reduces wind noise by 15dB. Built-in silicone on the bottom to prevent scratching the hot shoe. | Compact and Lightweight: This grip plate features an ultra-thin design to realize a net weight of only 70g, enhancing its compactness and lightness. Featured a strap slot for the wrist strap (ID: 3848). The built-in flat wrench on the bottom for easy accessory assembly and disassembly.

Compatiblity: This l-shape Grip is customized designed for Fujifilm X T5 to provide a comfort grip that the baseplate is in the same silver surface as the camera. The xt 5 grip easily locks the camera via a 1/4"-20 D-ring thumbscrew at the bottom | Ergonomic Handgrip: The xt5 l-shape grip is equipped with ergonomically designed handgrip which made of silicone, greatly improved grip experience, comfort and non-slip | Integrates Swiss Plate for Arca: Built in quick-release plate for Arca on the bottom to quickly switch to tripod shooting (ID: BUT2664) | Lightweight and Compact: The grip features a slim and compact baseplate, only weight 79g, which is compact, light and easy to carry. Besides, a shutter button is included for a better touch | Related Products: The bottom of the grip features a strap slot for SmallRig hand strap (ID: 2926) , and 1/4"-20 holes for mounting on mini tripod (ID: 2429) | Notice:The anti-off pin of the base plate must be aligned with the hole at the bottom of the camera during installation.

For Fujifilm X-T5: This l-bracket grip is customized designed for Fujifilm X T5 to provide a comfort grip and the black surface as the camera. The xt 5 grip easily locks the camera via a 1/4"-20 D-ring thumbscrew at the bottom, no need wrench | Integrates Swiss Plate for Arca: Built in quick-release plate for Arca on the bottom to quickly switch to tripod shooting (ID: BUT2664) | Ergonomic Handgrip: The xt5 l-shape grip is equipped with ergonomically designed handgrip which made of silicone, greatly improved grip experience, comfort and non-slip | Lightweight & Compact: The grip features a slim and compact baseplate, only weight 79g (2.78oz), which is compact, light and easy to carry. Besides, a shutter button is included for a better touch | Recommend Products: The base features three 1/4"-20 holes to mount on tripod (ID: BUT2429) or plates for Manfrotto-type, a strap slot for SmallRig hand strap (ID: 3926)

Compatibility: SmallRig Cage 3858 is designed for Nikon Z 30. All-in-one all-inclusive design, fit and protect the camera, the cage has silicone cushions that prevents scratches and maintains full access to all buttons, interfaces, the flip screen, etc. | Anti-twist: The cage hold the camera tightly through a 1/4"-20 screw at the base and a side lock adapter on the right to keep the camera stable and no shaking. | Multiple Installation Points: Built-in expansion ports of various specifications, such as 1/4"-20 threaded holes, locating holes for ARRI for Top Handle HTS2756, 3765, Side Handle HSS2425, 3814, for HDMI Cable Clamp 1822; and a cold shoe mount on the top for microphone and LED light for Vlogging to achieve multi-scene shooting | Quick Switch: The base plate has a built-in quick release plate for Arca-Swiss, which can be quickly installed to an tripod for Arca and stabilizer for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro | Hinge Arm Design: A hinge arm at the battery door fits camera curve, which can not only enhance the bare metal grip, but also quickly replace the battery.

For Nikon Z 8: SmallRig Z 8 cage kit is specifically designed for Nikon Z 8. It includes a cage, an HDMI cable clamp, and a top handle to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. | Triple Protection: The cage locks the camera via a 1/4"-20 screw, a locating screw at the bottom, and one screw on the right side to keep the camera stable. Note: Please remove the split ring on the right of the camera to install the screw on the right side. | Quick Switch: The quick-release plate for Arca-Swiss at the bottom, can be quickly installed to the tripod for Arca and stabilizer for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, for a quick switch between gimbal and tripod shooting. The built-in magnetic wrench at the bottom is convenient for disassembly and assembly. | Ergonomic Top Handle: The top handle feels comfortable and enables easy carrying and low-angle shots. 1/4"-20 threaded holes, 3/8"-16 locating holes for ARRI, cold shoes, and NATO rails support monitor mount 2905B/2903B, microphone 3468, LED light 3286, NATO accessories. | Interface Protection: The Z 8 cable clamp can fix cables for HDMI and USB-C at the same time, and the cables are fixed with a thumbscrew to protect the interface and ensure the stability of the signal transmission. The cable clamp can be quickly assembled and disassembled without tools. | Multiple Mounting Points: The cage kit has multiple 1/4"-20 holes and 3/8"-16 locating holes for ARRI, which can attach side handle 2093; the side 1/4"-20 locating hole can suit single rod clamp 3598 for follow focus 3850; the left NATO rail quickly connects side handle 4017.

For Nikon Z f - SmallRig Z f Cage 4261 is specifically designed to provide protection for Nikon Z f camera, while also offering enhanced grip and the ability to attach additional accessories, features a convenient dial control on the top for easy access and a familiar camera experience. | Better Handgrip - This cage 4261 comes with an ebony handle, which has been carefully designed to ensure a comfortable and secure grip on the camera. This handle adds to the overall user experience and makes handheld shooting more comfortable. | All-Round Protection - It securely locks the camera via a 1/4"-20 screw on the bottom and an M2.5 screw on the right side, while also featuring rubber pads to prevent scratches, and maintains full access to all the camera's buttons, card slots, flip screen, and battery door. | Integrated Plate for Arca - Integrated quick release plate for Arca-Swiss allows for fast and effortless switching between handheld shooting, tripod setups, or gimbal usage for DJI RS mini. Recommended SmallRig Tabletop Tripod BUT2664 for vlogging. | Multiple Mounting Points - Z f Cage 4261 features a 1/4"-20 threaded hole for attaching the Side Handle 4015, an 3/8"-16 locating hole for ARRI for the Top Handle 3765/ Monitor Mount 2903B, a cold shoe for attaching an LED Video Light 3286B, as well as strap holes for the Hand Strap 3848 and QD mounts for a Shoulder Strap 4118 | NOTE: 1. Please remove the strap ring on the right side of the camera before installing this cage. 2. The ebony handle of the cage may have grain and color different from those in the picture.

COMPATIBILITY: SmallRig L-Shape Grip for Nikon Z fc Camera 3480 is designed to provide a comfort grip. The retro-style handle shares similar texture and color with the camera; the baseplate shares the same silver surface treatment with the camera and fits perfectly | VERTICAL SHOOTING: The L grip secures to the camera via a 1/4"-20 D-ring screw on the bottom and comes with a built-in 1/4"-20 threaded hole on the grip that enables vertical shooting on a tripod | TRIPOD SHOOTING: The baseplate features a built-in plate for Arca Swiss to quickly switch to tripod shooting, and a 1/4"-20 threaded hole at the center that supports tripod or quick release plate for Manfrotto | EXPANSION INTERFACE: The baseplate features a built-in cold shoe allows attaching microphone, light and other accessories | LIGHTWEIGHT DESIGN: The bottom plate of the handle adopts an ultra-thin design, and the net weight of the product is only 74g, which is compact, light and easy to carry

Compatibility: This retro-style Z fc handgrip is custom designed for the Nikon Z fc, and equipped with an ergonomic handgrip to provide a comfortable grip. The L grip secures to the camera via a 1/4"-20 D-ring screw on the bottom; no need for the wrench | Integrates Swiss Plate for Arca: Built-in quick-release plate for Arca on the bottom to quickly switch to tripod shooting (ID: BUT2664) | Vertical Shooting: The L grip has a built-in 1/4"-20 threaded hole on the grip that enables vertical shooting on a tripod | Lightweight and Compact: The zfc grip features a slim and compact baseplate, overall weight of only 74 g (2.61 oz), which is compact, light, and easy to carry for outdoor shooting | Expansion Accessories: Built-in 1/4"-20 threaded hole at the bottom that supports a tripod (ID: BUT2429) or quick release plate for Manfrotto, cold shoe for attaching microphone, light, etc. A strap slot for wrist strap (ID: 3848/PAC2456B)

For Nikon Z50 II: Designed specifically for the Nikon Z50 II, this cage offers a seamless fit that provides unobstructed access to camera buttons and interfaces, enhancing your shooting experience. It delivers comprehensive protection and multiple expansion options for your camera. Note: The top section of the cage may obstruct the use of the camera's built-in flash, preventing it from popping up | Three-Point Locking: The cage securely fastens the camera using a 1/4"-20 screw at the bottom and locating blocks on both sides. It features built-in silicone padding to prevent scratches on the camera. The three-point locking system allows for cage mounting without the need to remove the D-ring, effectively preventing any shifting | Quick Switch Design: Quick release plate for Arca at the bottom supports tripod and stabilizer setups (compatible with RS 2, RSC 2, RS 3, RS 3 Pro, RS 4, and RS 4 Pro), enabling quick transitions between handheld, tripod, and stabilizer shooting. Additionally, a dual-head wrench at the bottom facilitates easy assembly and disassembly | Multiple Mounting Points: Built-in 1/4"-20 threaded holes, 1/4"-20 locating holes, and 3/8"-16 locating holes for ARRI, NATO rail, dual cold shoe mounts, QD ports, and strap holes can connect to top handles (ID 3765), magic arms (ID 3874), monitor supports (ID 2903B), and other accessories, making it suitable for various shooting scenarios | Protective Accessories: Comes with a reliable, scratch-resistant tempered glass screen protector rated at 9H hardness and IK03 impact resistance. Note: The screen protector is intentionally designed slightly smaller than the screen edges to prevent dust from entering through larger gaps

For Nikon Z6 III - SmallRig Z6III cage is a full cage specifically designed for Nikon Z6III. It is a full cage design that protects the camera without obstructing its interfaces and provides protective housing and versatile expansion options for a camera. | Anti-Twist Locking Design - Three-point locking system ensures stability and prevents twisting by securing the camera with one 1/4"-20 screw at the base and two M2.5 screws on the sides. Note: Please remove the split D-ring on the camera to install the cage. | Quick Switch - The quick-release plate for Arca-Swiss at the bottom, can be quickly installed to the tripod for Arca or stabilizer for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro, for a quick switch between gimbal and tripod shooting. The built-in magnetic wrench at the bottom is convenient for disassembly and assembly. | Multiple Mounting Points - This Z6 III Cage has multiple 1/4"-20 holes and 3/8"-16 locating holes for ARRI, which can attach top handle 3765 and side handle 2093, the left NATO rail quickly connects side handle 4017. Besides, there are cold shoe mounts for the SSD mount bracket 2343 or LED video light 3286B. | QD Socket & Wrist Strap Hole - Built-in multiple wrist strap holes, which are compatible with Hand Strap 3848 & 2456, the bottom QD socket can attach the QD strap buckle.

For Nikon Z6 III - SmallRig Z6III cage kit is a full cage specifically designed for Nikon Z6III. It includes a cage, a cable clamp, and a top handle to facilitate low-angle shots and protect the camera, also provides versatile expansion options for a camera. | Anti-Twist Locking Design - Three-point locking system ensures stability and prevents twisting by securing the camera with one 1/4"-20 screw at the base and two M2.5 screws on the sides. Note: Please remove the split D-ring on the camera to install the cage. | With a Top Handle- This top handle provides a comfortable grip and is easy to carry for smooth and low-level shooting, it also has 1/4"-20 threaded holes for magic arm 3873, 3/8"-16 locating holes for ARRI for monitor mount 2903B, cold shoes for LED video light 3286B, and NATO rail to expand your devices. | Quick Switch - The quick-release plate for Arca-Swiss at the bottom, can be quickly installed to the tripod for Arca or stabilizer for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro, for a quick switch between gimbal and tripod shooting. The built-in magnetic wrench at the bottom is convenient for disassembly and assembly. | Multiple Mounting Points - This Z6 III Cage has multiple 1/4"-20 holes and 3/8"-16 locating holes for ARRI, which can attach top handle 3765 and side handle 2093, the left NATO rail quickly connects side handle 4017. Besides, there are cold shoe mounts for the SSD mount bracket 2343 or LED video light 3286B.

Compatibility: SmallRig cage with removable silicone grip for Sony ZV-E10 3538 is designed to provide dedicated protection, accessory solutions and better grip experience. | Dedicated Protection: The cage is locked via a 1/4"-20 screw at the bottom and further with an included anti-deflection lock to prevent twisting. It also features rubber cushions on the top and bottom inside to prevent scratches. | Quick Release Plate for Arca-Swiss: The quick release plate for Arca-Swiss on the bottom attaches directly to the tripod for Arca-Swiss type for quick switching among handheld, tripod, and stabilizer shooting scenes. The bottom threaded holes are designed for DJI RS 2/RSC 2 stabilizer quick-release plate (upper) to improve stabilizer shooting experience. | Maintain Full Access: The cage maintains access to buttons, card slots, battery compartment, and flip screen. With a cut-out slot left at the battery door for dummy battery cable, the camera can be placed flat on the table when using a dummy battery. | Multiple Mounting Points: The cage comes with cold shoe mounts both at the top and the bottom for microphone and LED light. It also features multiple 1/4"-20 threaded holes and 3/8"-16 locating holes for ARRI standard.

For Sony ZV-E10 II: SmallRig ZV-E10 II Cage Kit 4867 is specifically designed for Sony ZV-E10 II. The overall adopts hollow design, which does not affect the normal use of camera functions. The position of the battery compartment is designed with an opening and closing wrench, which better fits the curve of the body, solves the problem of placing the little finger, and enhances the grip of the camera | Cable Clamp For HDMI: SmallRig 4867 is equipped with a dedicated hand twisted cable clamp for HDMI, which is easy to use and can be manually installed without tools, protecting the interface for HDMI of the camera and making signal transmission more stable | Three-Point Locking: SmallRig full cage 4867 secures the camera via a 1/4"-20 screw on the bottom and M2.5 screws on both sides to prevent camera deflection, lens shake, and accidental dropping during shooting. Built-in all-round protective gasket to prevent the camera from scratching, making shooting more reassuring | Built-in Plate for Arca-Type: The bottom of the cage built-in quick release plate for Arca-Swiss, which is for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro stabilizers and tripods for Arca type. It can be quickly switched between handheld, stabilizer, and tripod to adapt to different video styles and improve shooting efficiency. (Note: When using with the stabilizer for DJI RS 3 Mini, ensure to first attach the quick release plate for DJI RS Mini to the base of the cage) | Multiple Mounting Points: This cage is equipped with 1/4"-20 threaded holes, locating hole for ARRI, cold shoe, shoulder / wrist strap slot, QD socket, and can be expanded with handles, microphone, light, monitor, shoulder / wrist strap. Recommended for use with accessories such as SmallRig Top Handheld 4757, SmallRig Side Handle 4755, SmallRig Monitor Mount 2903B, SmallRig Wrist Strap 3848

For Sony ZV-E10 II: SMALLRIG QR Cage Kit is exclusively designed for Sony ZV-E10 II, allowing for the expansion of camera accessories, improving grip, and protecting the camera bottom from scratches | HawkLock Quick Release Structure: One-button stable self-locking, smooth sliding, and improved disassembly and assembly efficiency. The quick release cage is also compatible with your existing traditional cold shoe, NATO rail, and for Arca accessories. | Ergonomically Designed: Built-in silicone handle enhanced grip experience. It features a hinge arm, positioned beside the battery compartment, allows for seamless battery replacement without obstructing the battery door. These design improves the fuselage grip, conforms better to its curve, and provides a comfortable resting spot for your little finger. | Anti-Twist Design: The three-point locking system securely fixes the cage to the camera with a bottom locating pin, 1/4"-20 screw, and M2.5 screw on the left side to prevent any deviation, while the all-around padding prevents scratches on the camera. | Built-in Plate for Arca-Type: The bottom of the L-shape grip is equipped with a quick release plate for Arca-Swiss, which can be quickly switch between tripod and stabilizer (Compatible with gimbal models for DJI RS2, RSC2, RS3, RS3 Pro, RS4 Pro) | With a Cable Clamp for HDMI: The cable clamp for HDMI mounts on the left side of the cage with a thumbscrew, allowing for convenient installation and removal of cables with a simple twist, ensuring the protection of the camera's port for HDMI and stable signal transmission.

For Sony ZV-E10 II: This handgrip is customized designed for Sony ZV-E10 II.The grip features a hinge arm at the battery compartment that can be turned outward, allowing for the full opening of the camera battery door to change the battery. Additionally, built-in magnetic double-head screwdriver on the base plate for easy disassembly and installation | Integrates Swiss Plate for Arca: Built in quick-release plate for Arca, which can be directly installed on the tripods for Arca and stabilizers for DJI RS 2/RSC 2/RS 3/RS 3 Pro/RS 3 Pro/RS 4 RS 4 Pro / RS 3 Mini, allowing for swift transitions between stabilizer, tripod, and handheld shooting | Ergonomic Wooden Grip: The ZV-E10 II l-shape grip is equipped with ergonomically designed handgrip which made of vintage wooden, greatly improved handheld experience and comfort. NOTE: Due to the unique wooden surface of each handgrip, there may be slight differences between products, which is normal | Lightweight & Compact: The grip features a slim and compact baseplate, only weight 79g (2.78oz), which is compact, light and easy to carry | Recommend Products: The L-shape mount plate features a 1/4"-20 threaded hole, strap hole, and QD interface at the bottom for mounting accessories like tripods (ID: 4059 / 4286) and hand straps (ID: PSC2428)

Streamlined Design：SmallRig Camera Cage 4161 adopts a streamlined design, providing comprehensive protection for your camera while expanding multiple accessory interfaces.The buttons on the top of the camera are completely avoided and all buttons are accessible.And it is lightweight, only 158g/0.34lbs | Built-in Quick Release Plate: Built-in bottom plate for Arca-Swis, is compatible with RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizer for DJI and Tripod for Arca ,which allows for quick switching between handheld, video tripod and stabilizer providing versatility for video shooting in various scenes | Anti-Twisting: The extension frame of the cage is securely locked with 1/4"-20 screws at the bottom and positioning blocks on both sides, preventing any twisting and ensuring a stable shooting experience. Built-in many silicone pads are also included to protect your camera from scratches. | Multiple Mounting Options: The cage features built-in 1/4"-20 and 3/8"-16 threaded holes, as well as a locating hole for ARRI, allowing you to attach various accessories such as top handles 3765 2165C, side handles 4016, and monitor mount 2903B. The built-in cold shoe allows you to attach microphones, LED video lights and other accessories. | Easy & Convenient: Built-in wrench for easy mounting and release. The bottom QD socket is compatible with SmallRig handband PAC2456, shoulder PSC2428, etc.