[Snap-On Quick Lock Design]: The side handle features snap-on quick lock design. It can align the NATO clamp to the NATO rail, and can snap on or release within one second without removing other accessories before, to save shooting time. And It can be locked again by pressing the wrench to ensure stability and safety. | [Balance Adjustment]: The handle can be adjusted up and down within 35mm, to balance the center of gravity and avoid interference with cable mounts. | [Ergonomic Design]: The handle is made of non-slip silicone material and features ergonomic designed. It can be quickly switched from left-handed to right-handed by the built-in wrench. | [Multiple Mounting Points]: The handle features 1/4"-20 threaded hole; 1/4"-20 locating hole; cold shoe mount fits Monitor Mount 2905B, 2903B; Magic Arm with Dual Ball Heads 3875; LED Video Light 3286B; Microphone 3468; wrist strap holes compatible with Hand Strap PAC2456; built-in magnetic wrench is convenient for accessories disassembly and assembly. | [Stability]: SmallRig Snap-on NATO Side Handle 4017 is designed to help camera moivement, and can stabilize left-handed and right-handed shooting. It can be compatible with standard NATO rail.

【Universal SSD Holder Mount】This universal SSD holder Mount is designed for mobile phones / cameras to attach external SSD. It is compatible with 0.3"-0.6"(8-16mm) thick SSDs, with no width restrictions. For example, it can be suitable for Samsung SSD T5/T7/ T7/T9 Shield, for SanDisk Extreme Pro 1TB 2TB SSD E30/E61/E81, for G-Technology G-DRIVE Mobile SSD, for Glyph Atom SSD, for Angelbird SSD2go PKT and other mainstream SSD hard drives. | 【2-in-1 Installation Method】The SSD Mount Bracket adopts a 2-in-1 installation method of cold shoe mount and for Magsafe, which can be used in multiple scenarios. The included detachable cold shoe adapter can be quickly installed at the bottom of the SSD bracket by sliding in, allowing the bracket to be installed on a phone cage / camera cage or other cold shoe adapters. You can also remove the cold shoe mount and attach it to the back of a phone with for MagSafe function through for MagSafe magnet. | 【Magnetic Ring Included】We also provide a magnetic ring for easy attachment to laptops or mobile phones / mobile phone cases without for MagSafe function. After using the magnetic ring, you can directly to absorb the ssd holder, which is convenient and quick. | 【USB-C Cable Clamp Included】The bottom of the SSD mount is equipped with a cable clamp to fix the USB-C cable, which is fixed by a knob screw to protect the transmission stability. This SSD bracket is compact and flexible, suitable for photographers and video shooters. | 【Rubber Pads】The external SSD holder is equipped with a soft protective silicone pad inside to hold the SSD firmly in the SSD holder and prevent scratches.

【DEDICATED SSD HOLDER】SmallRig SSD Mount Bracket 3272 is designed for Samsung T5/T7 SSD, it compatible and works well wtih SmallRig Cage for BMPCC 6K Pro 3270. | 【WIDE RANGE OF CLAMP】The clamp range of this SSD Mount 3272 is from 57mm to 80mm, which can be adapted to SSD of different sizes, especially for Samsung T5/T7 SSD. | 【FLEXIBLE INSTALLATION】This Mount comes with a cold shoe which can be fixed on the bottom or side of the holder, so you can mount the SSD to a cold shoe adapter; or you can also use 1/4"-20 screw(s) to mount the holder, which is super flexible. | 【BUILT-IN USB-C CABLE CLAMP】It comes with a cable clamp to fix the USB-C cable, fastened by a thumb screw. This SSD holder is compact and versatile for photographers and video shooters. | 【RUBBER PADS】The external SSD bracket features all-round rubbe pads inside, keeping the SSD securely in the clamp and preventing scratches.

【Highly Customized Rod】This 1.5" rod can serve as a 15 mm quick release mount for adapting anything that requires a male or female 1/4" 20 connection. It is often used in conjunction with a clamp Mount (not included) or Cheese Plate (not included). | 【Standard 14"-20 Screw】1/4"-20 male mount with locking wheel can tightly secure items such as external monitors, microphones, lighting, and many other accessories. | 【Standard Short 15mm Rod】A 15 mm micro rod with a 1.5" total length (38 mm) comes with 1/4"-20 male thread on top, and 1/4"-20 female thread at the bottom for attachment of other products. | 【High-Quality Material】The rod is made of high-quality aluminum alloy and stainless steel, light but stable when used. | 【Specifications】Package included: 1 x 15mm rod adapter; Material: Aluminum. Product Dimensions: 50 x 10 x 10mm; Net Weight: 30g.

SMALLRIG Standard Rosette Bolt-On Mount (M6 Thread) 1939 is a multi-functional Rosette (M6, 31.8mm diameter) mount | There are three 1/4-20" and four M2 threaded holes on this rosette mount | It can be attached to a cage, rosette handle and other accessories | The stainless steel and aluminum alloy material make the rosette mount more sturdy and lightweight | The middle screw hole is M6, which just fit the ARRI Rosette with M6 screw. Such as the wooden handle 1891 and 1941.

Compatibility : A dedicated sun hood working with SmallRig Cage for Shinobi 5”CMA2305 / Atomos Shinobi 5" / Ninja Series CMA2209 | Enhance Viewing Experience: The sunshade helps to provide great viewing experience even in harsh lighting conditions | Easy To Use : Dedicated sun hood fitted into the SMALLRIG Cage CMA2209/CMA2305 by 4 velcro tapes, which is easy to take on and removed | Lightweight and Durable : The Sun hood is made of nylon, weighs only 63g, can be folded for easy portability | Package Includes: You will get a Sun Hood, which Dimension is 16X3.7X0.019 inch

Wide Compatibility: The super clamp equipped with 1/4"-20 threaded holes, 3/8"-16 threaded holes, and 3/8"-16 locating holes for ARRI to quickly connect action cameras, monitors, LED lights, microphones. | Adjustable Jaw: It supports rod of the diameter of 0.55inch(14mm) to 2.36inch(60mm), and surface with a maximum thickness up to 2.55inch(65mm) for you to fix on round pipes, tables, handlebars, tripods and stabilizer handheld rings. | Durable and Anti-scratch Design: The crab-shaped clamp is made of aircraft-grade aluminum alloy and stainless steel, CNC machined and carved to increase sturdiness and durability. Built-in anti-slip cushions to protect your camera accessories and increase clamping stability. | Anti-twist Design: The bottom ballhead is designed with a hex hole for enhanced fastening with the Allen wrench. The 360-degree adjustable ball heads feature helical, which enhances the stability of the ball head. | Load Capacity: The maximum load capacity is 7.7 lb (3.5KG), compatible with most photographic accessories.

Heavy Duty Super Clamp: It is crafted from aluminum alloy, a high load capacity of 15kg / 33.1lb meets diverse equipment support requirements | Compatibility: Equipped with a 1/4"-20 & 3/8"-16 top screw on a 5/8" stud for versatile attachment such accessories as cameras, microphones, monitors, video lights, and more | Suitable for Flat Surface: Removable wedge enhances grip on flat surfaces, ensuring stable equipment clamping for secure shooting | Multiple Scene Usage: The clamp can be attached to round tubes with diameter of 10 - 60mm / 0.4 - 2.3in and flat objects up to 50mm / 1.9in thick with the removable wedge. It can attach equipment to round tubes, tables, tripod legs, c stands, and stabilizer handles | Standard Threaded Holes: The 1/4"-20 thread connects to a magic arm. You can also use M5 screws to connect other super clamps or magic arm camera mounts, or connect two super clamps 4861 using M5 screws to create a double-headed super clamp | Protective Pad: The robust clamp features integrated pads, ensuring effective protection of the clamped objects while enhancing the stability of the grip | Note: super clamp x 1, 5/8" stud x 1 (with 1/4"-20 & 3/8"-16 top screw). Any inquiries will be responded to within 24 hours. Please feel confident in using them

【VERSATILITY】SmallRig 2730 comes with a super clamp with 1/4" and 3/8" threads and an articulating arm with 1/4” screws on both ends respectively | 【SUPER CLAMP】This super cool clamp was made of lightweight aluminum alloy, comes with 1/4"-20 and 3/8"-16 thread and can be mounted virtually anywhere, such as cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It can open maximum 54mm and minimum 15mm | 【360°ROTATION】Double 360 degrees Ball Head Articulating design adjusts any angles based on your needs. With 1/4" thread on both ends to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, microphone on one end and other accesorries like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc | 【RUBBER CUSHION】Both the Super Clamp and the Articulating Magic Arm features a rubber cushion which could prevent the scratches of monitor and help to lock your accessories tighter | 【WHAT YOU CAN GET】Made of aluminum alloy and stainless steel, sturdy and durable. Package includes: a Super Clamp and a Articulating Magic Arm

☛Multiple Functions☚A versatile super camera clamp that can mounts onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other super clamps | ☛Robust and durable☚The solid anti-rust stainless steel and black anodized aluminum alloy for high durability, Non-slip rubbers on the inner side protects your rig and reduces scratches | ☛Multiple Thread Holes☚Comes with 1/4"-20 and 3/8"-16 thread for attaching a variety of accessories | ☛Multiple Using Scene☚SMALLRIG camera super clamp 2058 could be mounted onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps very stably | ☛Compatible with 15mm-40mm Rods☚SMALLRIG magic arm with clamp 2058 is compatible with 15mm-40mm rods, which could be tightened by locking lever

【Highly Customized Rod Clamp】SmallRig Super Lightweight 15 mm-Rail block 942 features two 15mm rod holes to fix 15mm rods and can be mounted on a plate/cage via included screws for extension needs. | 【Standard 14"-20 Threads】The 15mm rod clamp comes with standard 1/4"-20 holes on it and has a standard 9mm space between two holes. | 【Easy to Fix with 1/4" Screws】It provides two short 1/4" screws (8mm) and two long 1/4" screws (18mm) to help fix this rod clamp on cage/plate/handles then attach extra gears. | 【High-Quality Material】The rod clamp is made of high-quality aluminum alloy, light but stable when used. Spring Ratchet Wingnut is to tighten the rod and re-position in narrow spots where you’re not able to fully turn them. | 【Specifications】Package included: 1 x 15mm-railblock, 2 x 1/4'' screw(short), 2 x 1/4'' screw(long), 1 x Hex Spanner; Material: Aluminum. | 【Related Products】If you need 15mm aluminum alloy rods when supporting your equipment, go for "SmallRig 1053", "SmallRig 1049".

【1/4" Mounting Points】Features 1/4”-20 screw on the top for monitor, light, or microphone. The bottom comes with a 1/4”-20 threaded hole for more DIY options | 【360° Sideways and Tilt 170°】The holder enables to swivel 360° sideways and tilts 170° with a free stop in any position | 【Maximum Load 1.5kg】The robust mount is CNC-Machined Aluminum and can support 5” and 7” monitor up to 1.5kg | 【With Allen Wrench】The swivel and tilt mount has protective rubber padding on top and includes an Allen wrench for tightening the mounts for further security. The tightness of each axis is adjustable via the Allen wrench | 【Note】Please do use the Allen Wrench to re-tighten the thumbscrew for further security

For DSLR / Mirrorless / Camcorder: The SmallRig multifunctional teleprompter 3646 is designed to accommodate any iPad or tablet up to 11 inches. Please note that it is not compatible with smartphones. This camera teleprompter provides a convenient solution for staying engaged in video conferences or livestreaming without having to look away from the camera at notes on a separate screen. Recommended reading distance - within 5m / 16.4ft. | Must Work with 15mm LWS Baseplate: To ensure proper functionality, this teleprompter must be used with a 15mm rail support system (separately available ID: 2092B / 3067). This setup helps to alleviate pressure from the lens and protect the camera lens mount. | Wide Lens Compatibility: The teleprompter can be mounted to the lens using the included silicone cover, which supports lenses with a diameter between 49mm and 95mm. There will be no vignetting when the focal lengthis equal to or greater than 22mm. | App Control: The SmallGoGo App, available on Apple Store and Android Market, allows you to extract text from PDFs, pictures, Word documents, and TXT files, making them editable for use with the teleprompter. | Modular Design: The lens hood can be quickly released for cleaning purposes. The teleprompter comes standard with a top flag to prevent glares and ghosting in complex environments. Additionally, it includes a 4 x 5.65" standard filter adapter for adding filters.

Exclusive Imprinted Hot Shoe Cover: Offered in sliver finishes as standard, the top of the hot shoe cover features the exclusive imprint of sound wave for FUJIFILM and the foundation year for FUJIFILM. | Ergonomic Design: SmallRig Thumb Grip for FUJIFILM X100VI / X100V is designed to enhance the grip and improve safety when holding the camera with one hand. | Enhanced Protection: Thumb grip built-in silicone pads protect your camera and hot shoe electronic components from dust, rust, and electronic shorts. Meanwhile, the fitted design makes sliding into the hot shoe of the camera easy. | Shutter Release Button Included: Comes with a concave shutter release button to ensure a soft and comfortable finger touch. | Related Products: SmallRig publishes many products for FUJIFILM X100VI. If you needed, please search L-shape Grip (Silver) ID: 4555 and (Black) ID: 4556; Leather Camera Cases ID: 4558. | Notice: In order to protect the camera's hot shoe, a gap of approximately 1 mm is reserved between the silicone pads of the thumb grip and the camera in the design.

Exclusive Imprinted Hot Shoe Cover: Offered in black finishes as standard, the top of the hot shoe cover features the exclusive imprint of sound wave for FUJIFILM and the foundation year for FUJIFILM. | Ergonomic Design: SMALLRIG Thumb Grip for FUJIFILM X-M5 is designed to enhance the grip and improve safety when holding the camera with one hand. | Enhanced Protection: Thumb grip built-in silicone pads protect your camera and hot shoe electronic components from dust, rust, and electronic shorts. Meanwhile, the fitted design makes sliding into the hot shoe of the camera easy. | Shutter Release Button Included: Comes with an aluminum alloy concave shutter release button to ensure a soft and comfortable finger touch. | Related Products: SMALLRIG publishes many products for FUJIFILM X-M5. If needed, please search for L-shape Grip ID: 4876 (Black) and ID: 4875 (Silver); Camera Leather Half Case Kit ID: 4879 (Black) and 4880 (Brown). | Note: In order to protect the camera's hot shoe, a gap of approximately 1 mm is reserved between the silicone pads of the thumb grip and the camera in the design.

Exclusive Imprinted Hot Shoe Cover: Offered in sliver finishes as standard, the top of the hot shoe cover features the exclusive imprint of sound wave for FUJIFILM and the foundation year for FUJIFILM. | Ergonomic Design: SMALLRIG Thumb Grip for FUJIFILM X-M5 is designed to enhance the grip and improve safety when holding the camera with one hand. | Enhanced Protection: Thumb grip built-in silicone pads protect your camera and hot shoe electronic components from dust, rust, and electronic shorts. Meanwhile, the fitted design makes sliding into the hot shoe of the camera easy. | Shutter Release Button Included: Comes with an aluminum alloy concave shutter release button to ensure a soft and comfortable finger touch. | Related Products: SMALLRIG publishes many products for FUJIFILM X-M5. If needed, please search for L-shape Grip ID: 4876 (Black) and ID: 4875 (Silver); Camera Leather Half Case Kit ID: 4879 (Black) and 4880 (Brown). | Note: In order to protect the camera's hot shoe, a gap of approximately 1 mm is reserved between the silicone pads of the thumb grip and the camera in the design.

Compatibility : SMALLRIG Top Handle with Locating Holes for ARRI 3765 is designed to facilitate low-angle shot and reduce burdens on arms, compatibility for Universal cold/hot shoe mount | Lightweight Only 124g : Hollowed-out design makes it weigh only 124g. Mostly made of aluminum alloy, together with anti-slip and anti-freeze silicone | Built-in Cold Shoe Mounts : It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories | Mounting Points: SMALLRIG Camera Grip has an abundance of 1/4"-20 and 3/8"-16 mounting points for other accessories. An Allen wrench helps tighten the locking screw, making it easy to assemble and disassemble | Related Products: 3/8"-16 locating holes support Monitor Mount 2903, 2348 to attach monitors; 1/4"-20 threaded holes support Magic Arm 2070 for monitors

【LOCATIING HOLE FOR ARRI 】The handle has a simple and compact design and comfortable grip which offers user an excellent handheld experience. It was developed for handshots and can easily hold the weight of a large cage rig with different attachments. | 【MULTIPLE CONNECTION】the camera handle with an abundance of 1/4 inch and 3/8 inch mounting points and a mounting hole for the ARRI standard for attaching accessories, such as SMALLRIG Magic Arm 2065 and 2070. | 【ANTI-OFF DESIGN】There is a built-in anti-off pin on the top front of the handle to preventing cold shoe adapter from coming off accidentally. | 【CHANGEABLE PINS】The locating pins are able to installed horizontally and vertically, which is convenient to fix the camera firmly and stably. | 【SWEET DESIGN】With built-in magnetic suction design, the included Hex Spanner is ready for your assembly without fear of loss.

SmallRig ball head has a precise 360° Panning Dial, which is easy to carry. It is an essential camera accessory for your amateur photography and outdoor travel records.Panoramic head with accurate calibration and independent pan knob for panoramic photography. | Mini ball head with knob supports multi-angle adjustment and quick switch between vertical shooting and horizontal shooting.Equipped with 1/4 screw, the removable quick release plate is suitable for SLR cameras. 3/8 screw hole at the bottom can be attached to tripod or monopod | The tripod ball head comes with a standard plate for Arca-Swiss compatible with other clamps for Arca-Swiss ensures a quick mount/dismount of your device. | Low-profile ball head design creates a stronger locking force and higher stability. Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability | Max Load up to 5 kg/ 176.36 ounce, made of aluminium alloy material, it is very strong and durable

【Solid Construction】- The tripod is Made of Aluminum Alloy, CNC+oxidation processing technology, durable and solid | 【For Arca-Swiss Compatible】- For Arca-Swiss compatible clamp and plate for quick release and mount | 【Fully Adjustable】- The dual-action ball head has an independent pan lock that enables you to rotate the base 360° for panoramic photography, and a ball lock to position your camera at a variety of angles. | 【Support Height Adjustment】- The tripod supports two levels of height adjustment, easy to adjust, the maximum working height: 210mm, the minimum working height: 140mm | 【Non-Slip Desing】- Non-slip feet design to keep the tripod steady. Max load weight is 11 lbs/ 5kg for optimal performance

【ADAPTER CABLE (D TO A)】SmallRig Ultra Slim 4K Adapter Cable (D to A) 3021 is a high-quality adapter cable (Micro Male to Full Female) for your camera setup. You can use an Type A cable with your camera cage or rig with this adapter cable. | 【2 X 1/4"-20 THREADS ON FEMALE END】The female end of the adapter cable features two 1/4"-20 threads to attach to a cage, bracket, or rig, and the threads measure 0.35" apart from center-to-center. Two screws are included to mount the adapter onto your rig. | 【ULTRA-SLIM CABLE FOR UP TO 4K@60HZ VIDEO】It’s ultra-slim 2.0 version and supports resolution up to 4K@60HZ and will be backward compatible. The adapter cable features a female Type A connector on one end and a male Micro Type D connector on the other end to fit a variety of cameras. | 【WIDE COMPATIBILITY】SmallRig 3021 is compatible with cameras with Micro-sized ports, like for Sony A7R IV, A7RIII, A7III, A7II, A7RII, or for Fujifilm X-T2, X-T3, etc. Besides, it can be used for camera cages or L brackets with no less than two 1/4"-20 thread holes (9mm distance from center to center) on the left side, like CCS2416, 2238, 2228, 2229, etc. | 【FLEXIBLE PVC CABLE】This flexible, ultra-slim PVC cable measures 141.1mm/5.6" in length. Note: Please make sure the port on your camera is a Micro-Sized Ports.

【ADAPTER CABLE (A TO A)】SmallRig Ultra Slim 4K Adapter Cable (A to A) 3019 is a high-quality adapter cable (Full Male to Full Female) for your camera setup. | 【2 X 1/4"-20 THREADS ON FEMALE END】It features two 1/4"-20 screws to fix the female part to the side of the camera cage or L bracket tightly to protect the camera's port and ensure a more stable connection. | 【ULTRA-SLIM CABLE FOR UP TO 4K@60HZ VIDEO】Ultra-slim design with a 3.6mm/0.1" outer diameter makes it thinner and softer than a regular cable. It's a perfect adapter cable used to change the camera port to a more desired direction as needed | 【WIDE COMPATIBILITY】This cable adapter is compatible with cameras with Full-Sized Ports, such as for BMPCC 4K & 6K, for Sony A7SIII, for Panasonic GH5, S1H, etc. Besaides, it is also suitable for camera cages or L brackets with no less than two 1/4"-20 thread holes (9mm/0.35" distance from center to center) on the left side, like SmallRig 2765, 2203, 2999, 2049, CCP2513, etc. | 【FLEXIBLE PVC CABLE】This flexible, ultra-slim PVC cable measures 141.1mm/5.6" in length. Note: Please make sure the port on your camera is a Full-Sized Ports.

Compatibility: SmallRig 2727 is universal 15mm LWS rod mount lens support which is designed to provide lens support and protect the mount for the lens. | Adjustable Vertical Height: Use the thumbscrew to adjust the vertical height. | External Diameter 73-108mm: The support protects the lens with an external diameter of 73-108mm. | V-shaped Bracket :The V-shaped bracket has a built-in pulley, and the usable position is not limited by the position of the zoom ring or the focus ring. | Easy to Use: It provides stable support & simple installation, which makes users feel comfortable.

【UNIVERSALITY】SMALLRIG Lens Support 2727 is designed to provide lens support and protect the mount for the lens. This lens support is suitable for lenses with weight within 2kg. | 【FITS STANDARD 15MM LWS RODS】SmallRig 2727 is compatible with 15mm LWS rod systems, which adds support for your longer lenses. | 【VERTICAL ADJUSTMENT RANGE】You can adjust the vertical height within a 2.1" (30.5mm) range via a quick release thumbscrew. Please note: Before using, loosen thumbscrew first. | 【FITS UP TO 4.25" LENS DIAMETER】The support protects the lens with an external diameter of 73-108mm. | 【BUILT-IN PULLEY】The V-shaped bracket has a built-in pulley, and the usable position is not limited by the position of the zoom ring or the focus ring. It provides stable support & simple installation, which makes users feel comfortable.

【UNIVERSAL SHOULDER KIT】SmallRig basic shoulder kit 2896 is designed to provide a comfortable solution for shoulder shooting. Set up your rig for shoulder-mounted handheld shots, this shoulder mount is also designed to stabilize your camera, provide comfort for long shooting days, and minimize rotation when shooting video with your DSLR, mirrorless, or small camera. | 【BASEPLATE WITH 15MM RODS & ROD CLAMP】It comes with a universal baseplate 1674 which makes the kit work with different types of cameras. The baseplate mounts your camera using its 1/4"-20 mounting screws and features a 15mm rod clamp, both helping support your small camera. | 【DUAL RUBBER HANDGRIP KIT】The dual handgrip kit assists with balance and comfort using its two 360° rotatable handgrips that mount onto the rods with a 15mm rod clamp. The 15mm LWS universal rod system allows you to customize your rig with accessories such as lights, monitors, microphones, wireless gear, or a follow focus. | 【SHOULDER PAD WITH 15MM ROD CLAMP】The ergonomic shoulder pad is made of a highly-elastic shoulder curve shape sponge to offer a superiorly comfortable shoulder experience during shooting. The rod clamp can be tightened via one thread for easy and quick operation. Featuring multiple 1/4"-20 threaded holes, the shoulder pad allows you to mount other accessories. | 【PACKAGE INCLUDES】The kit 2896 includes a baseplate with a 15mm rod clamp (SmallRig 1674), two 12" long 15mm rods (SmallRig 1053), a shoulder pad (SmallRig 2894), and a dual handgrip kit (SmallRig 998), two hex spanner and two 1/4 screws.

【NATO RAIL STANDARD】SMALLRIG BUN2468 is compatible with standard NATO accessories for quick release, such as clamps, handles and monitor holders, enabling you to quick attach and release the rig components | 【THIN & LIGHTWEIGHT】The thickness of SMALLRIG 2468 is 6mm, and the length of it is 50mm. Weighs only 14g, it is made by Aluminum Alloy, very sturdy and lightweight, easy for storage | 【ANTI-OFF DESIGN】SMALLRIG The safety pins on both side prevents your NATO accessories from accidentally sliding off | 【MOUNTING OPTIONS】It can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws (included) to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc | 【RECOMMENDATION】It works with items with NATO clamp, such as SmallRig NATO Clamp 1973, SmallRig Monitor Mount with NATO clamp 2100 and BSE2347, SmallRig Rotating Nato Handle HTN2362, for quick attachment and release

【NATO RAIL STANDARD】SMALLRIG BUN2484 is compatible with standard NATO accessories for quick release, such as clamps, handles and monitor holders, enabling you to quick attach and release the rig components | 【THIN & LIGHTWEIGHT】The thickness of SMALLRIG 2484 is 6mm, and the length of it is 90mm. Weighs only 21g, it is made by Aluminum Alloy, very sturdy and lightweight, easy for storage | 【ANTI-OFF DESIGN】SMALLRIG The safety pins on both side prevents your NATO accessories from accidentally sliding off | 【MOUNTING OPTIONS】It can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws (included) to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc | 【RECOMMENDATION】It works with items with NATO clamp, such as SmallRig NATO Clamp 1973, SmallRig Monitor Mount with NATO clamp 2100 and BSE2347, SmallRig Rotating Nato Handle HTN2362, for quick attachment and release

【STABLE &LIGHTWEIGHT】SMALLRIG Universal LWS Baseplate with Dual 15mm Rod Clamp fits mainstream DSLR and mirrorless camera cages on the market. The baseplate is locked via the screws and attach to the camera via the 1/4" or 3/8" screws. | 【15MM ROD CLAMP】It works with dual 15mm rods to attach such as accessories lens support, follow focus, and matte box during handheld shooting and tripod shooting. | 【SUPPORT TRIPOD SHOOTING】Features multiple threaded holes at the bottom, which can be attachmented with various sizes of quick release plates for tripod shooting. | 【RUBBER CUSHIONS】There built-in on the surface to prevent your camera from scratching and twisting. | 【WORK WITH CAGE 3270】This base plate can ensure 85mm optical height when used with 3270 Cage for BMPCC 6K PRO. The specially-designed bottom allow the 3270 cage replace the SSD without removing the baseplate.

▲ADJUST ALL ANGLES▲ Features a wingnut in the middle to adjust the angles and positions of monitor or video light or other accessories. It supports rotation of any angles | ▲LOCK TIGHT▲ Tightened with a wingnut quickly and conveniently. It is easy to use and can help you lock tightly. Needn’t worry about dropping | ▲NOTICE▲ Not recommend for monitor or LED light over 1.0 kg | ▲1/4 SCREWS▲Equipped with 1/4” screws at both ends. It could attach camera cage, top plate and Top Handle 1955/1984 on the one end, while attach monitor or video light on the other end | ▲SMALLER MODEL▲ This is the smaller model of SMALLRIG Magic Arm with Small Ballhead 2163. If you need a bigger one, please check the SMALLRIG 2163

【Reliable Large Wheels】The SmallRig professional tripod wheels 3986 is a camera dolly designed for mobile tripods and easy action photography. Equipped with large and highly adaptive 3-inch rubber wheels, the dolly can realize the stable movement of the tripod on smooth surfaces and shoot a smooth tracking lens, with a max payload of 33 lbs (15 kg) for optimal performance. The independent brakes ensure that the dolly stays locked in place. | 【Fits Most Tripods】Compatible with most tripods, the SmallRig 3986 clamp can extend up to 54mm/2.12" and is suitable for tripod leg diameters less than 54mm. With adjustable clamps and simple to use twist screws, this universal dolly can easily fit your tripod. Its max payload is 33 lbs (15 kg) for optimal performance. | 【Simple Adjustable Legs】Extendable legs ranging from 298mm to 435mm (11.7" to 17.1"), make the video dolly compatible with different tripods in any opening and closing angles. Non-slip flip locks ensure device security and a great user experience. | 【Easy-to-Store & Carry】Folding design. The tripod trolley is equipped with handles and carrying bag for easy transfer. Moreover, compared with most similar products, it has smaller folding space (16.9" x 5.9") and lighter weight (3.97 lbs/1.8kg), which increases great convenience. | 【SmallRig Tripod Recommendations】The camera tripod dolly is compatible with SmallRig Heavy Duty Tripod 3751, SmallRig 72" Video Tripod 3760, SmallRig 68" Tripod 3983, SmallRig 71" Tripod 3935, SmallRig Selection Camera Tripod 3474 and other standard or professional tripods.

【Wide Compatibility】The upgraded universal magnetic phone cage kit is compatible with multiple mobile phone models, and is compatible with mobile phones with a width of 2.52~3.46 inches (64mm~88mm), such as for iPhone 16 / 15 / 14 / 13 series, for Samsung Galaxy S24 / S23 / S22 series, for Huawei Mate 60 / 40 series, for Google Pixel 8 / 7 / 6 series, etc. The phone cage can fix the phone through for MagSafe magnetic suction, or through the included mobile phone clip. Supports the use of mobile phones with cases. | 【Quick-release Dual-handle Design】The dual handle solution increases the stability of dynamic shooting for video creators. The two quick-release side handles included in the kit support quick-release connection, and can be quickly switched between side handle and top handle mode through different installation methods. A hexagonal wrench for installation is placed inside the handle, which is easy to store and use whenever you want. The detachable wireless controller on the handle's top supports remote shutter release and recording, with a maximum remote control distance of up to 10m / 32.8ft. | 【Multiple Expansion Ports】The upgraded universal phone cage contains multiple 1/4-20” threaded holes, cold shoe ports and quick release interfaces, and adds expansion ports of 67mm filter, shoulder strap hole and expansion dock fixing port. Allowing users to expand a variety of professional video equipment, such as LED light 3286, microphone 3468, handles 4402, tripod 4630, phone filter ring 4843, phone filter 4726, expansion dock and shoulder strap, etc. | 【High Quality Aluminum Alloy Material】Universal QR phone cage kit is made of high quality aluminum alloy to be lightweight yet sturdier. In addition, the phone clip has built-in rubber pads to ensure that the smartphone is fixed in place and avoid scratches. | 【What You Get】The universal quick-release video kit Basic version includes: universal phone cage 4299B x 1, quick-release wireless control side handle 4402 x 1, quick-release side handle 4403 x 1, user manual x 1 and professional after-sales service. If you have any questions, please feel free to contact us.

【19-25mm Adjustable Range】Size-adjustable mount to firmly hold 19-25mm diameter microphones | 【Shockproof and Noise Reduction】 Built-in silica gel to absorb bumps and noise | 【Built-in 15mm Rod Clamp】 Built-in a 15 mm rod clamp, it can be attached to universal 15mm rod and locked via a wingnut easily | 【Related Products】Together with a 15 mm rod, it can be attached to SMALLRIG Cold Shoe Handle 2165, Top Handle 2027 | 【Package Includes】1 x Microphone Mount 1993

【HIGH CUSTOMIZATION】 Aluminium alloy inner part and wooden handle external part to provide a comfortable and lightweight handheld shooting. NOTICE: The wooden handle is made of natural rosewood without any painting. | 【UNIVERSALITY FOR BOTH SIDES】 The SmallRig NATO Side Handle allows you switch from the left to right quickly. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. NOTE: only ONE piece in the package. | 【MOUNTING POINTS】 The NATO Side Handle features 3/8 and 1/4 threaded holes on the top for more accessories like SmallRig Magic Arm 2065/2066. A cold shoe to mount articulating arm and microphone directly. | 【UP AND DOWN ADJUSTABLE】 The Wooden grip can be adjusted up and down. The built-in Allen wrench on the top is used to adjust the handle up and down based on your needs. | 【NATO CLAMP】 The Wooden handle is locked via NATO clamp to make your setup quick release and fits any cage featuring NATO rail on side. The handle is also compatible with SmallRig NATO Rail 2172/1409 for quick-release your setup without any tools.

Compatibility: Compatible with two cables at the same time (Maximum Capacity: 2 cables with diameter of 6mm) | Install Method: The cable clamp is fixed to the cage, handle, L plate, and other accessories by 1/4" screws, and accommodate cable such as HDMI cable, microphone cable, charging cable, shutter cable, USB cable and headphone cable, etc. | Quick Installation: Designed with space on the surface, the wrench can pass through the clamp to install or remove 1/4" screws, and then quickly install or remove the clamp | Easy To Use: the spring cover is tight, and the cable can be installed by opening the cover, which is convenient and quick | Product Advantages: keep the wire tidy, prevent accidental disconnection of the signal, and protect the wire port

【Ultra Thin & Flexible】The ultra-thin and flexible high speed HDMI cable (55m/1.8ft) with 3.6mm diameter fits perfectly in tight spaces, designed for gimbal, camera stabilizer, monitor, wireless video transmitter & receiver and other devices with standard A-type HDMI interfaces to achieve high-speed signal transmission. | 【High Speed HDMI Cable】Ultra-Slim HDMI 2.0 version standard cable supports ultra HD 4K@60Hz, Full HD 1080P, 3D, Ethernet, Audio Return Channel(ARC), HDR, and you can transmit high-resolution sound formats. | 【Wide Compability】Compatible with devices with standard HDMI type A connector, including an HDTV, Computer, TV Stick, Roku, Blu-ray DVD player, PS3, PS4, and Xbox, etc.( for BMPCC 4K&6K, for Panasonic S1H/GH5/GH5S, for Z-cam E2, for Atomos Ninja V, for Hollyland Mars 400, etc.) | 【Stable Connection】SmallRig HDMI connector ensures maximum data transmission and provides pure signal transmission, reliable performance for data transfer, vivid video colors and spectacular surround sound while protecting against EMI/RFI interference. | 【What you can get】The package include 1 x HDMI cable, 1 x Cable tie and professional after-sales service. Come with a cable tie for cable management to make your rig neat. If you have any questions, please feel free to contact us.

Universal Compatibility: Embrace versatility with the standard V-mount, ensuring compatibility with a broad spectrum of V-mount batteries available in the market. Fully compatible with SmallRig V-mount battery: VB50(Asin:B0BQLV3W1F), VB99(Asin:B0B6Z9K42P), VB99 Pro(Asin:B0CLGQDFCG), VB155(Asin:B0B6ZCNF1P). | Powerful Charging Hub: Experience high-speed charging with the PD protocol-compatible USB-C (65W Max.) and QC protocol-compatible USB-A (36W Max.) ports. Additional D-Tap (14.8V x 1) and DC (8V x 1 / 12V x 2) power ports provide a comprehensive charging solution for various devices. Clear indication of working status and fast/slow charging modes through the power and charging/discharging indicator lights. | Effortless Integration: Streamline your setup with quick and hassle-free mounting onto any 15mm LWS rod system, enhancing the efficiency of your workflow. | Accessory Attachment Points: Equipped with six 1/4"-20 threaded holes, ten M4 threaded holes on the back, and five 1/4"-20 threaded holes on the top and bottom for attaching various accessories, including crab-shaped clamps, dual rod clamps, and magic arms. | Intelligent Controls and Robust Build: Take command with the user-friendly power on/off button, simultaneously controlling multiple ports for seamless operation. The aluminum alloy plate not only exudes durability but also boasts excellent heat dissipation, ensuring sustained high performance even in demanding shooting conditions.

【High Customization】SmallRig V mount battery adapter plate 3204 is designed to provide longer battery life for your camera equipment through V-mount batteries. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market. It is suitable for Sony for Canon and other DSLR cameras | 【Adjustable Arm】This V lock battery plate features an adjustable arm for quick adjustment of the V mount battery position, to get a perfect angle for your battery like vertically or hang it upside down on the rod system | 【Dual 15mm Rod Clamp】This power supply splitter comes with a dual 15mm rod clamp, lock the plate on 15 mm LWS rod system easily and quickly | 【Rich Output Ports】It comes with an 8V DC, a 14.2V D-TAP and two 12V DC ports, satisfied different requests. 5V/2A USB output port to power other external accessories like a monitor, a phone, etc. | 【Note】 Do not use in damp environment to avoid short circuit; The plate fits most V mount batteries but PAGlink series V mount batteries and Patona Premium Battery for BP-190WS | 【SmallRig V Mount Battery】SmallRig mini V-mount Battery VB50 (50Wh) and VB99 (99Wh) are now available, multi-interfaces and PD fast-charging design, widely compatibility use for cameras, camcorders, monitors, smartphones, etc. if you need a compact & sufficient power supply, please search SmallRig V Mount Battery 3579(Asin:B0B6YYCFBK), SmallRig V Mount Battery 3580(Asin:B0B6Z9K42P).

【High Customization】SmallRig V mount battery adapter plate 3499 is designed to provide longer battery life for your camera equipment through V-mount batteries. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market. It is suitable for Sony for Canon and other DSLR cameras | 【Adjustable Arm】This V lock battery plate features an adjustable arm for quick adjustment of the V mount battery position, to get a perfect angle for your battery like vertically or hang it upside down on the rod system | 【Dual 15mm Rod Clamp】This power supply splitter comes with a dual 15mm rod clamp, lock the plate on 15 mm LWS rod system easily and quickly | 【Rich Output Ports】It comes with two 14.8V D-TAP output, one 8V DC output, one 12V DC output, satisfied different requests, power external accessories like a monitor, a phone, etc. | 【Note】 Do not use in damp environment to avoid short circuit; The plate fits most V mount batteries but PAGlink series V mount batteries and Patona Premium Battery for BP-190WS | 【SmallRig V Mount Battery】SmallRig mini V-mount Battery VB50 (50Wh) and VB99 (99Wh) are now available, multi-interfaces and PD fast-charging design, widely compatibility use for cameras, camcorders, monitors, smartphones, etc. if you need a compact & sufficient power supply, please search SmallRig V Mount Battery 3579(Asin:B0B6YYCFBK), SmallRig V Mount Battery 3580(Asin:B0B6Z9K42P).

New Upgrade: Vibe P108 Pro is the 2nd-generation product in SmallRig's Vibe LED Light series. Inheriting the iconic ring-shaped metal stepless knob design, it now features an embedded LCD color screen for a clear display of parameters such as color temperature and brightness, allowing for easy single-handed adjustment. | Professional Performance: Premium 5W RGBWW Light Source with CRI > 95 and TLCI > 98, delivering 1150Lux @ 0.3m/5600K, suitable for entry-level content creators, photography enthusiasts, on-the-go live streamers, and more. | Versatile Lighting Modes: With built-in cool/warm light, HSI, and special effects modes, it can simulate 2500K-6500K daylight, 36000 color sources, and 12 special effects. Ideal for facial illumination, tabletop still life lighting, Vlogs, live streaming, creating ambiance, light painting photography, and more. | Flexible Mounting Options: With 1/4"-20 threaded holes and a cold shoe mount, for easy switching between hot shoe top-mount, handheld, or desktop tripod stand setups. Ideal for providing fill light for smartphones, cameras. Accessories for Sony, for Canon, and more. | Long-lasting Power: Built-in 1500mAh lithium polymer battery supports USB-C charging, providing up to 1.2 hours at full power and 3 hours for regular shooting. | Durable Construction: The light body features a high-strength aluminum alloy frame, anodized aluminum alloy knobs, and an ABS/PC light diffuser, ensuring durability. The soft light panel provides uniform and wide light dispersion, capturing smooth and silky soft light moments for portrait photography effortlessly. | Note: Includes a P108 Pro light, a charging cable and a user manual. Any inquiries will be responded to within 24 hours, and we offer a 1 year after-sales service. Please feel free to use them with confidence.

Vertical/ Horizontal Quick Switching: The tripod fluid head supports one-click switching from horizontal shooting to vertical shooting; just press the button below the QR plate. Quickly open and lock without removing the camera | Smooth Pan and Tilt: Built-in damping and balancing system, this video fluid head supports smooth swivel 360° and tilt +90°/-90°, realizing stable shooting from different angles | Removable Telescopic Handle: The telescopic handle can be removed and installed on the left and right sides of the fluid head, making it easy to switch and store. Rotate the handle counterclockwise to extend 112-230 mm (4.4-9.1 inches). Release the handle knob to easily adjust the handle to the desired angle | Switchable QR Plate: The quick-release plate mount can be rotated 90°; just press the button under the base to switch attachment direction. The QR Plate fits for Arca Swiss for quick switching between handheld and tripod shooting | Max load of 5 kg (11 lbs): The tripod head is designed to be compact but durable and stable, with a maximum load of 5 kg (11 lbs). The video head only weighs 0.55 g (1.21 lbs), and the base diameter is 45mm (1.77 inches), making it friendly to carry for outdoor shooting