★5V Stepper Motor Driver Board Module,ULN2003 motor driver chip. | ★Chip all the pins already leads for easy connection to use. | ★5V power supply.4-way signal indicator. | ★On-board XH-5 P socket.connect 28BYJ-48 Stepper Motor direct. | ★Package Includes: 2set Control boards & Stepper Motor.
★Microphone Sensor High Sensitivity Sound Detection Modules for A-rduino PIC AVR | ★Uses 5V DC power supply | ★Has 3mm mounting screw hole | ★Has two outputs: AO, analog output, real-time output voltage signal of the microphone | ★Package Includes:3pcs Microphone Sensor High Sensitivity Sound Detection Module
★ High performance, cost-effective. | ★Maximum support 5-axis stepper motor driver controllers. | ★Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software. | ★USB power supply and peripherals powered phase are separated to protect computer security. | ★All the signals are opto-isolated which can protect your computer security.
★ KES-490 AAA Blu-ray Disk Drive For Sony PS4 CUH-1001A CUH-1115A BDP-020 BDP-025 | ★Please make sure your circuit board is model BDP-020 or BDP-025 before you buy this disk drive. | ★You must swap the drive circuit board from your original drive to the replacement drive. | ★This item is BRAND NEW! | ★The new DVD drive will need to be “flashed” with your console’s security key or will need to have your old drive's board swapped into the new replacement drive.
★Gold plated contacts for best connectivity and long life | ★Install PCI-E device freely according to dimension and position of computer case. | ★Ideal for small computer & server case, like 1U & 2U. | ★One end is PCI-E 4X male and another end is PCI-E 4X female. It no need dirver | ★Size:19.2 x3.4 cm approx
★10pcs USB LED Portable Night Light Bright Mini Keychain Camping Car Lamp Module | ★Plug these tiny LED modules into any standard USB port for instant light. | ★Small and portable, fits in a wallet or on a keychain. | ★Provides 100 hours of light when used with a 5000mAh power bank. | ★Input Power: 5V 40mA (0.2W)
★5V Stepper Motor Driver Board Module,ULN2003 motor driver chip. | ★Chip all the pins already leads for easy connection to use. | ★5V power supply.4-way signal indicator. | ★On-board XH-5 P socket.connect 28BYJ-48 Stepper Motor direct. | ★Package Includes: 1set Control boards & Stepper Motor.
★144-LED ring light providing shadow free illumination | ★Compact design with built-in dimmer | ★Mounting size: up to 2.48" (63mm) in diameter | ★The ring light has 2-3/8" (60mm) inside and 3-5/8" (92mm) outside diameters | ★110V to 240V wide band power supplies
★4x4 type 16 keys,8 pins 2.54mm pitch connector. | ★Ultra-thin design provides easy integration to any project. | ★Soft and has a removable paper backing,Adhesive back can be securely affixed to the surface of chassis. | ★Used widely in industrial and home electronic equipments, instrument, etc. | ★Package Includes: 3PCS Membrane Switch Keypad.
★Using only two pins, control 16 free-running PWM outputs,You can even chain up 62 breakouts to control up to 992 PWM outputs | ★Board runs with 5V DC current but has input voltage only for the servo motors | ★Adjustable frequency PWM up to about 1.6 KHz | ★On board power indicating LED light | ★Package Includes: 2pcs PCA9685 16 Channel 12-bit PWM Servo motor Driver I2C Module
★Support automatic upgrades, full range of STM32 SWD & full range of STM8 SWIM download | ★Support the full range of STM32 SWD debugging interface | ★A simple 4-wire interface (including power), fast, & stable | ★Interface definition marked on the casing! Do not need to refer to the manual | ★Package Includes:2PCS Emulator Downloader Programming Unit(Note:Random Color),Comes with 20CM Dupont Lines to easier connection
★The module is a 12-foot clock with 4 points of positive digital (0.36 inches) display | ★Display common anode for the four red LED | ★Level control interface for 5V or 3.3V | ★Digital tube 8 gray adjustable | ★Package Includes: 2PCS TM1637 Display
★MULTIPLE PROTECTION: Micro USB lithium ion / lipo / 18650 charging board with overcharge, overdischarge and overcurrent protection, other features include current monitor, under voltage lockout, automatic recharge. | ★MULTIPLE CHARGING METHOD: This module is made for charging rechargeable using the constant-current/constant-voltage (CC/CV) charging method, charge port can take power from USB.The input has a MINI USB socket, which can be used to directly charge with the mobile phone charger, and still retains the input voltage wiring solder joints, which can be very convenient DIY. | ★ADJUSTABLE CHARGING CURRENT: The charge current can be modeled externally with the Rprog resistor R3. | ★DRIVE LOAD: OUT+ and OUT- can be connected to the load, such as the booster converter module/buck converter module or other loads. | ★Package Includes: 2pcs TP4056 Charging Module
Application -- Turbo sound whistle is universal for most cars. | Sound -- Use a turbine system or a blow valve to make your vehicle sound like a turbocharged vehicle. | Material -- Made of light weight aluminum CNC Machined from 6061 T-6 Aluminum. | Please Note -- Turbo whistle is not suitable for extremely curved tailpipes. | You Will Get -- Aluminum turbo sound simulator whistle * 2 & 100% Satisfied guarantee.
★Suitable for car/motorcycle halogen lamp or LED lamp use | ★When open the turn signal is working, "tick" sound appears Allow LED bulbs to blink at the normal rate | ★DOP-3x flasher relay packaged with special IC | ★Work for most 3-Pin Motorcycles Compatible with CF13-GL, CF14-JL, CF13-JL | ★Using international standard pins, easy installation, without changing the original car line, plug and play Car, motorcycle, ATV or other models commonly used in replacement of LED lights, LED turn signal will appear stroboscopic light phenomenon or not, Use this goods can solve the above problem
★ Material:stainless steel. | ★Remove burrs, rust, dust, removing the oxide layer. | ★Does not rust, durable, long service life. | ★Coating, can improve the quality of metal stone,economy, high efficiency. | ★For different angles of wood, metal materials,polishing and grinding all kinds of rough surface etc.
★Rated Voltage: DC 12V, Rated Current: 11A | ★One press and on; Another press and off | ★Attached with red, black leads (Length: 15cm) | ★Base size: 18mm/0.7"(φ) x 10mm/0.4"(H), Button: 11mm/0.4"(φ), Overall Height: 33mm/1.3" | ★Easy to controll the circuit power on/off, widely used in the electronics design projects DIY
★Input voltage: DC12-24V; Max current: 8A; Output: 1 channel; | ★Output power: 12V<96W, 24V<192W | ★0-100% fully PMW dimmable | ★Output: 1 Channel 96W 12V (0-8A) | ★Easy to operate, connect the DC power source with the single color LED strip lights directly by the dimmer
★Comaptible models:HP Envy x360 M6-AQ003DX, M6-AQ005DX, M6-AQ103DX, M6-AR04DX, M6-AQ105DX series, HP Envy M6-AR M6-AQ 15Z-AR 15T-AQ 15-AQ 15Z-AR000 series. | ★Replaces part number: 450.07K06.0001, 450.07K05.0001, 856788-001. | ★Replacement and high quality,Replace your faulty, cracked or broken hdd caddy. . | ★Connector type: 7pin & 9pin, Works with 2.5 inch SATA Hard Drive / SSD. | ★If your ice is too thick or not harvesting, the ice thickness control sensor may be faulty.
★ For operation up to 32 volts DC or 250 volts AC. | ★Power rating: 20A (amp). | ★Built-in waterproof button cover for protection from the elements. | ★Not designed for push on / push off manual switch operation, but the button pops out at overload and is reset by pushing back in. | ★Great for For Automotive / Industrial / Marine And Many Other applications.
★Works with any 1-8s Lipo Li-ion Limn Li-fe RC drone car. | ★Display Mode: cell voltages, total voltages, lowest cell voltage, Remaining capacity. | ★When the voltage is below the set value ,it will buzzer with red LED Light , pre-set value 3.3V. | ★Small Size(40mm x 25mm x 11mm) and light weight(10g),easy to use. | ★Package Includes: 5pcs Alarm Buzzer
★Microphone Sensor High Sensitivity Sound Detection Modules for Ar-duino PIC AVR | ★Can be used to detect the sound intensity of ambient,With analog output and threshold level output flip | ★Has two outputs: AO, analog output, real-time output voltage signal of the microphone | ★Uses 5V DC power supply,Has power indicator light,The comparator output is light | ★Package Includes: 5PCS Sound Sensor
★144-LED ring light providing shadow free illumination | ★Compact design with built-in dimmer | ★Mounting size: up to 2.48" (63mm) in diameter | ★The ring light has 2-3/8" (60mm) inside and 3-5/8" (92mm) outside diameters | ★110V to 240V wide band power supplies
Replacement Audio Aux Jack Part for To-yota OE Numbers or 8619002010. Direct replacement | Designed to match the appearance of the original AUX jack | Compatible with To-yota 2009-2013 Corolla, 2009-2012 Tacoma, 2007-2014 Tundra, 2009-2011 RAV4, 2008-2010 Avalon, 2008-2013 Sequoia, 2011-2014 Sienna, 2010 Highlander. Please see the description or use your vehicle to Check with Amazon Partfinder | This aux jack replacement part restores Audio functions from your mobilephone or mp3 to your vehicle's Audio system | Easy to Install, The process is very simple. Warranty: Lifetime Warranty
★The cold hot shoe mount comes with a 1/4" mounting hole. You can mount it onto any 1/4-20 threaded hole,such as Blackmagic Cinema Camera, Pocket cinema camera,DSLR rig/cage/cheese plate. It is perfect for you to attach the video light to your Blackmagic cinema camera or pocket cinema camera. | ★For Camera&DSLR Rig, Cage, Cheese Plate | ★With 1/4" Mounting Hole | ★Easy to Install | ★Package Included: 2x1/4" Hot Cold Shoe Mount
★Output voltage: 400000 v(Please pay attention to safety) | ★High pressure type: the type of pulse current | ★input voltage: DC 3 V to 6 V,Input current: 2 A - 5 A | ★High pressure discharge distance between: 10 mm - 20 mm.To avoid burning, use the time limit for 1 minute. | ★Package Includes:1pcs 400000V Boost Step-up Power Module.
★2.4" diagonal LCD TFT Touch Panel display | ★Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control | ★Colorful, 18-bit 262,000 different shades | ★4-wire resistive touchscreen | ★8 bit digital interface, plus 4 control lines
★1 single module can drive an 8 8 dot matrix common cathode. | ★1 on the left block to an input port, an output port on the right. | ★5 modules with input and output interfaces, support for cascading multiple modules. | ★MAX7219 dot matrix display module | ★Module size : 5 cm X 3.2 cm wide X 1.5 cm high