Size: The thread size of 10AN and AN10 ORB is 7/8-14 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 10AN and AN10 ORB is 7/8-14 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 10AN and AN10 ORB is 7/8-14 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 10AN is 7/8-14 UNF, and the thread size of AN12 ORB is 1 1/16-12 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 10AN is 7/8-14 UNF, and the thread size of AN6 ORB is 9/16-18 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 10AN is 7/8-14 UNF, and the thread size of AN8 ORB is 3/4-16 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

10an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. | 10an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid; the hose fittings are made of aluminum alloy. | Maximum Working Pressure: 625psi. Bursting Pressure: 1875psi. Temperature Range: -40℉ to 257℉. | Package includes: 10pcs 10an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 10an hose separator clamp and 10an braided fuel line (Length: 20 Feet). Hose ID: 0.53". Hose OD: 0.79inch. | The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.

[Size] The thread size of 10AN is 7/8-14 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 10AN is 7/8-14 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 10AN is 7/8-14 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 10AN is 7/8-14 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -40℉ to 248℉ (-40℃ to 120℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 10AN is 7/8-14 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 10AN is 7/8-14 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -40℉ to 248℉ (-40℃ to 120℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] Inner hole diameter: 0.63 inch (16mm). Fit for clamping and mounting 8AN fuel line. | [Material] Aluminum alloy 6061-T6. | [Function] It can use to secure and separate transmission lines to keep your project clean and organized. | [Application] Fuel hose separator clamp wildly used in fuel hose, oil line, brake line, gas line, water pipe etc. | [Note] Five sizes of hose mounting clamps available, please measure the OD of your hose before purchasing .

Size: AN10 to 1/2" NPT, the thread size of 10AN is 7/8-14 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing: The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended.

Size: AN10 to 1/2" NPT, the thread size of 10AN is 7/8-14 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: AN10 to 3/4" NPT, the thread size of 10AN is 7/8-14 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size] AN10 to 3/4" NPT, the thread size of 10AN is 7/8-14 UNF. | [Material] Made of aluminum alloy 6061-T6, anodized black surface. | [Sealing] The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 66 degree tapered thread. | [Application] Widely used in fuel systems, cooling systems, power steering systems, etc. | [Notice] To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: AN10 to 3/8" NPT, the thread size of 10AN is 7/8-14 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

10AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. | Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. | Maximum working pressure: 625psi. Bursting pressure: 1875psi. Temperature range: -40℉ to 257℉. | Package includes: 10pcs 10an black&red swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 10an hose separator clamp and 10an braided fuel line (Length: 20 Feet). Hose ID: 0.53". Hose OD: 0.79inch. | 10AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid; the hose fittings are made of aluminum alloy.

[Size] Thread Size of 10AN PTFE Fitting is 7/8-14UNF. | [Application] The PTFE Hose End only work with PTFE fuel line. | [Parameter] Working pressure: 1500PSI. Temperature range: -65°F-252°F. | [Seal] The AN side is sealed by a 37 degree angle. | [Material and Feature] Made of aluminum alloy 6061-T6. 360° Swivel design for easy assembly.

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

Size: 10AN flare to 1/2" NPT, the thread size of 10AN is 7/8-14 UNF, Degree: 90 degree elbow | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size]10AN flare to 1/2" NPT, the thread size of 10AN is 7/8-14 UNF, Degree: 90 degree elbow. | [Material] Made of aluminum alloy 6061-T6, anodized black surface. | [Sealing] The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | [Application] Widely used in fuel system, cooling system, power steering system, etc. | [Notice] To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: 10AN flare to 3/4" NPT, the thread size of 10AN is 7/8-14 UNF, Degree: 90 degree elbow | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size]10AN flare to 3/4" NPT, the thread size of 10AN is 7/8-14 UNF, Degree: 90 degree elbow. | [Material] Made of aluminum alloy 6061-T6, anodized black surface. | [Sealing] The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | [Application] Widely used in fuel system, cooling system, power steering system, etc. | [Notice] To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: 10AN flare to 3/8" NPT, the thread size of 10AN is 7/8-14 UNF, Degree: 90 degree elbow | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size]10AN flare to 3/8" NPT, the thread size of 10AN is 7/8-14 UNF, Degree: 90 degree elbow. | [Material] Made of aluminum alloy 6061-T6, anodized black surface. | [Sealing] The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | [Application] Widely used in fuel system, cooling system, power steering system, etc. | [Notice] To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size] 12AN to 3/4 inch barb, and thread size of 12an is 1-1/16-12 UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 250℉. | [Material] Made of aluminum alloy 6061-T7. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 12AN to 3/4 inch barb, and thread size of 12an is 1 1/16-12UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 250℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 12AN to 3/4 inch barb, and thread size of 12an is 1-1/16-12 UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 12AN to 3/4 inch barb, and thread size of 12an is 1-1/16-12 UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

Size: The thread size of 12an is 1 1/16-12 UNF. | Seal: The AN flare is sealed at a 37 degree angle. | Parameter: Max Working Pressure: 1500 PSI. Working Temperature Range: -65º F to 252º F. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Function: The fitting caps block off fuel hose line, prevent dirt and debris from entering fittings and adapters.

Size: The thread size of 12AN is 11/16-12 UNF, and the thread size of AN8 ORB is 3/4-16 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 12AN is 1 1/16-12 UNF, and the thread size of AN10 ORB is 7/8-14 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 12AN and AN12 ORB is 1 1/16-12 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 12AN is 1 1/16-12 UNF, and the thread size of AN8 ORB is 3/4-16 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

[Size] The thread size of 12AN is 1 1/16-12 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 12AN is 1 1/16-12 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.