The female AN10 45 degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. | 10AN 45 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose . | These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

The female AN10 90 degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. | 10AN 90 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided CPE fuel hose. They are not compatible with PTFE hose, E85, rubber hose. | These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly. Swivel hose end can be reused and recycle if you do not want them to stay in the original place. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling. | EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.

APPLICATION- EVIL ENERGY push lock fitting is widely used in Oil/ Water/ Fluid/ Airline etc. Connect engine with air filter, the engine with radiator system, automobile air conditioning system, oil cooler etc.Our Push Lock fitting is only work with Rubber Push-Lock oil hose. They are not compatible with PTFE Hose, Nylon Braided Hose, or Stainless Steel Braided Hose. | Multi Sizes Supplied:Available in 3 sizes and four angles:6AN,8AN,10AN/straight, 45 degree, 90 degree, 180 degree.(PUSH LOCK FITTING NO INSTALLATION INSTRUCTIONS,detailed Installation steps look described in detail.) | Designed For Smooth Flow, the hose end fittings are made of high-quality aluminum alloy material for strong strength. Polished and anodized surface provide the bright appearance and corrosion protection. | ENVIRONMENTAL FRIENDLY- push lock fitting can be reused and recycle if you do not want them to stay in the original place. Due to the high-quality material which makes push lock fitting worked last for long. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Push Lock fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to make it easier.

The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. | 10AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose . | These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

Joins 2" OD pipe to 2" OD pipe, besides, we offer you 4 different sizes and you would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. | Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware. | The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint. Our product is a pre-formed ring, also, it is now more commonly used in higher-end aftermarket exhaust systems using slip-fit, because they are relatively cheap, and are reusable without damaging the pipes. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

Joins 2.0" OD pipe to 2.0" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs. | Application: Butt joint band 2.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 inch exhaust clamp come with an I-block which creates a complete "Inner-circle Seal" when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks. | Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N·m. | Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.

Joins 2.25" OD pipe to 2.25" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs. | Application: Butt joint band 2.25" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 1/4 exhaust clamp come with an I-block which creates a complete "Inner-circle Seal" when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks. | Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N·m. | Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.

Joins 2.5" OD pipe to 2.5" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs. | Application: Butt joint band 2.5" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 1/2 exhaust clamp come with an I-block which creates a complete "Inner-circle Seal" when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks. | Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N·m. | Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.

Joins 2.75" OD pipe to 2.75" OD pipe, besides, we offer you 7 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). | Application: Butt joint band 2.75" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 3/4 exhaust clamp come with an I-block which creates a complete "Inner-circle Seal" when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks. | Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N·m. | Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.

Joins 3.0" OD pipe to 3.0" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs. | Application: Butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 3 inch exhaust clamp come with an I-block which creates a complete "Inner-circle Seal" when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks. | Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N·m. | Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.

Joins 4.0" OD pipe to 4.0" OD pipe, besides, we offer you 4 different sizes and you would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. | Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware. | The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint. Our product is a pre-formed ring, also, it is now more commonly used in higher-end aftermarket exhaust systems using slip-fit, because they are relatively cheap, and are reusable without damaging the pipes. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

The female AN6 180 degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. | 6AN 180 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose . | These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

The female AN6 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. | 6AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose . | These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

The female AN8 45 Degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. | 8AN 45 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose . | These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

APPLICATION- EVIL ENERGY push lock fitting is widely used in Oil/ Water/ Fluid/ Airline etc. Connect engine with air filter, the engine with radiator system, automobile air conditioning system, oil cooler etc. Our Push Lock fitting is only work with Rubber Push-Lock oil hose. They are not compatible with PTFE Hose, Nylon Braided Hose, or Stainless Steel Braided Hose. | Multi Sizes Supplied: Available in 3 sizes and three angles: 6AN, 8AN, 10AN/ straight, 45 degree, 90 degree.(PUSH LOCK FITTING NO INSTALLATION INSTRUCTIONS, detailed Installation steps look described in detail.) | Designed For Smooth Flow, the hose end fittings are made of high-quality aluminum alloy material for strong strength. Polished and anodized surface provide the bright appearance and corrosion protection. | ENVIRONMENTAL FRIENDLY- push lock fitting can be reused and recycle if you do not want them to stay in the original place. Due to the high-quality material which makes push lock fitting worked last for long. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Push Lock fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to make it easier.

The female AN8 90 Degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. | 8AN 90 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose . | These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

The female AN8 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. | 8AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose . | These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

[Size] ID: 1" (25mm), tolerance is ±0.5mm; OD: 1.33" (34mm), tolerance is ±0.8mm; Length: 10 feet. | [Material] Made of EPDM rubber. | [Parameter] Working Pressure: 60psi; Burst Pressure: 180psi; Temperature Range: -40°F to 257°F; Min Bending Radius: 200mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements. | [Medium] Compatible with coolant, water, antifreeze, etc. | [Application] Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc.

[Size] Joins male/female flange 1.5" ID to 1.5" pipe. T-Bolt thread size: 1/4-28 UNF. | [Advantage] V-band clamp is easy to install and remove. The male and female flanges can be connected more stable, and provide a good seal with uniform pressure at the flange. | [Feature] Male and female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation. | [Material] 304 Stainless steel clamp and flanges; 304 stainless steel for long durability and reliability, corrosion resistance and high-temperature resistance. | [Application] Compatible for exhaust system, turbocharger, downpipe, muffler etc.

Size: joins 1.75" OD pipe to 1.75" OD pipe, width of strap: 3inch /76.2mm. | Application: Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc. | Advantage: No welding design, easy to install or remove. | Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m.

Size: joins 1.75" OD pipe to 1.75" OD pipe, width of strap: 3inch /76.2mm. | Application: Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc. | Advantage: No welding design, easy to install or remove. | Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m.

[Specifications] ID: 1/2"(13mm); OD: 0.75"(19mm). Minimum Bend Radius: 4.7"(120mm). Wall thickness: 3mm. | [Parameter] Working Pressure: 300psi. Burst Pressure: 1200psi. Temperature Range: -40°F to 257°F. | [Medium] The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc. | [Material] The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant. | [Application] The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc.

ID: 1/2inch (13mm),OD: 0.75inch(19mm).Material: NBR. | Working Pressure: 300psi. Burst Pressure: 1200psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 4.7inch(120mm). | Applicable Medium: 1/2 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc. | Application: SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, please check the pressure of application before perchase. | EVIL ENERGY provide 25ft 1/2inch fuel hose 3-month warranty.Any problem you might have, please feel free to contact us via Amazon message.

ID: 1/2inch (13mm),OD: 0.75inch(19mm).Material: NBR. | Working Pressure: 217psi. Max Working Pressure: 300psi. Burst Pressure: 1160psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 4.7inch(120mm). | Applicable Medium: 1/2 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc. | Application: SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, please check the pressure of application before perchase. | EVIL ENERGY provide 5ft 1/2inch fuel hose 3-month warranty.Any problem you might have, please feel free to contact us via Amazon message.

Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring. | Size: 1/2inch (12mm) OD. | Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉. | Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended) | Application: The fuel line check valve is widely uesd in carburetors and low pressure fuel systems.

Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring. | Size: 1/2inch (12mm) OD. | Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉. | Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended) | Application: The fuel line check valve is widely uesd in carburetors and low pressure fuel systems.

[Size] ID: 1/2" (13mm), tolerance is ±0.5mm; OD: 0.78" (20mm), tolerance is ±0.8mm; Length: 10 feet. | [Material] Made of EPDM rubber. | [Parameter] Working Pressure: 100psi; Burst Pressure: 300psi; Temperature Range: -40°F to 257°F; Min Bending Radius: 104mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements. | [Medium] Compatible with coolant, water, antifreeze, etc. | [Application] Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc.

ID: 1/4inch (6mm);OD: 0.47inch(12mm).Material: NBR. | Working pressure: 200psi.Max working pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 2.36inch(60mm). | Applicable Medium: 1/4 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc. | Application: SAE 30R7 rubber fuel line widely used in fuel system,oil cooling, steam emission,please check the pressure of application before perchase. | EVIL ENERGY provide 10ft 1/4inch fuel hose 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message.

ID: 1/4inch (6mm);OD: 0.47inch(12mm).Material: NBR. | Working pressure: 200psi.Max working pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 2.36inch(60mm). | Applicable Medium: 1/4 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc. | Application: SAE 30R7 rubber fuel line widely used in fuel system,oil cooling,steam emission,please check the pressure of application before perchase. | EVIL ENERGY provide 5ft 1/4inch fuel hose 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message.

Size: ID: 6mm (1/4"). OD: 12mm. Length:50FT (15.24 Meter). | Wall thickness: The wall thickness of the vacuum tube is 3mm, which can prevent collapse under vacuum. | Material: FDA compliant food grade pure silicone. | Working Pressure: 43PSI. Burst Pressure: 100PSI (high temperature),130PSI (room temperature). Temperature range: -40°F to 428°F (-40°C to 220°C). | Application: Wildly used in automotive vacuum lines, turbochargers, air intake components, etc.

Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring. | Size: 1/4inch (6mm) OD. | Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉. | Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended) | Application: The fuel line check valve is widely uesd in carburetors and low pressure fuel systems.

Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring. | Size: 1/4inch (6mm) OD. | Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉. | Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended) | Application: The fuel line check valve is widely uesd in carburetors and low pressure fuel systems.

Package includes: 3pcs 5ft(1.5m) silicone vacuum hoses with inner diameter of 1/8"(3mm), 5/32"(4mm) and 5/16"(8mm). | Wall thickness: The wall thickness of the vacuum tube is 3mm, which can prevent collapse under vacuum. | Material: FDA compliant food grade pure silicone. | Working Pressure: 43PSI. Burst Pressure: 100PSI (high temperature),130PSI (room temperature). Temperature range: -40°F to 428°F (-40°C to 220°C). | Application: Wildly used in automotive vacuum lines, brake booster lines, turbochargers, etc.

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 250℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14 UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 250℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications. | 10AN PTFE Fuel Injection Fuel Line Length: 20 feet(6M). Inner Diameter: 1/2" (12.95mm). Outside Diameter: 0.66in (16.9mm). Please measure before purchase! Fit for 10AN PTFE hose end fitting ONLY. | Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi. 5/8" AN-10 nylon and stainless steel braided high pressure PTFE fuel line holds up a lot stronger to heat and extreme circumstances. | PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant. | PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended.

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

Size: The thread size of 10an is 7/8-14 UNF | Seal: The AN flare is sealed at a 37 degree angle. | Parameter: Max Working Pressure: 1500 PSI. Working Temperature Range: -65º F to 252º F. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Function: The fitting caps block off fuel hose line, prevent dirt and debris from entering fittings and adapters.