【HIGH CUSTOMIZATION】SmallRig BMPCC cage is specifically designed for Blackmagic Design Pocket Cinema Camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. It could be used on DJI Ronin S or Zhiyun Crane 2 gimbal stabilizer | 【PERFECT PROTECTION】Secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Rubber pads on the bottom protect your camera body from scratching | 【MUTIPLE MOUTINGS】This cage comes with multiple mounting points, such as 1/4’’ & 3/8’’ threaded holes, cold shoe and 3/8’’ locating holes for ARRI standard, allow you to attach more accessories, like microphone or SmallRig Articulating Arm – 2070, etc | 【NATO RAIL】Features built-in nato rail that allows you to quickly release accessories with NATO clamp. Mounting SmallRig Side Handle - 2187 for hand-held shooting | 【FEATURED RECOMMENDATIONS】Compatible with Ronin S and Crane 2. For better setup, please search “SmallRig Mount for Samsung T5 SSD 2245”, “SmallRig lens adatper support for Metabones 2247” and “SmallRig HDMI cable clamp 2246”, which are exclusively designed for BMPCC 4K & 6K

【MINI BALL HEAD】 SMALLRIG Mini Ball Head Mount 2059 is designed to attach the camera tightly via a cold shoe adapter, while the 1/4" screw could be mounted on the monitor in adjustable directions in different scenarios and could be locked via a wingnut. | 【COMPATIBILITY】 The cold shoe adapter works for most cameras including Canon, Nikon, Olympus, Pentax, Panasonic, Fujifilm, Kodak, etc | 【ADJUSTABLE DIRECTION】 The ball head can be adjusted into most any position | 【NOTE】 The ball head maximum load: 3 kg | 【PACKAGE INCLUDED】 The Mini Ball Head Mount 2059 is TWO PCS pack. If you need one PCS pack, please see the SMALLRIG 761.

Double head 1/4" male screw: Since both ends are 1/4" male screw, it could be used on most accessories with the 1/4"-20 thread. | Multi-functional, can be used with tripods, monopods, telescopes, ball heads, lens collars, lens plates etc. | Made of high quality stainless steel, it is light-weight and durable. | Recommended for those who frequently reconfigure equipment. It is the optimum equipment for photographers/movie makers. | Size: Length: 20mm, approx. Diameter: 16mm.【※Please note that the screws are with SmallRig LOGO on them】

Compatible with 15mm rod support system | HIGH PERFORMANCE: The 15mm carbon fiber rod has good heat resistance, corrosion, rubbing performance | SMOOTH COATING: The smooth surface makes your installation more conveniently and comfortably | LIGHTWEIGHT: Weighs only 35g, lighter than traditional stainless-steel rods | LENGTH: 6 inches (15cm) long. If you need a longer rod, 15mm Carbon Fiber Rod - 20cm 8inch - 870 and 15mm Carbon Fiber Rod - 30cm 12inch - 851 will be recommended

Transfer Weight :Designed to remove the weight stress from the camera's lens mount when your camera is mounted on separately available 15mm LWS rods. | Quick Adjustable: The lens support offers 53.5mm vertical adjustment to fit most lens. The height is adjustable via the quick release knob without using tools. | Security Design: The center column attaches to a Y-support which features strap slots on each side for further security. | Lens Diameter Range: The lens support is compatible with lens diameter up to 150mm. | Compatibility: Support for 15mm LWS Rods

SmallRig Super Lightweight 15mm-Railblock 2061 includes 2pcs of super lightweight 15mm-Railblock. | Each Super Lightweight 15mm-Railblock-3 comes with two rod clamps for 15mm rods, which could be tightened via 2 rotatable wingnuts. | The adjustment of one wingnut will not affect the operation of the other wingnut. | In addition, it is equipped with an abundance of 1/4’’ threaded holes for DIY operations.

【MAGIC ARM】The precise and durable designed Articulating Magic Friction Arm provides great versatility for the positioning of access. | 【EASY POSITION】Double 360 degree Ball Head Articulating design adjusts any angles based on your needs. | 【WIDE COMPATIBILITY】With 1/4" thread on both ends to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, microphone on one end and other accesorries like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc. | 【RUBBER & THREAD】Mounted with 1/4" screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter. | 【CUSTOMER SERVICE】Backed with 100% satisfaction guaranteed for quality problem; 24 h x 7 Customer Service Support.

【HIGH CUSTOMIZATION】SmallRig Side Handle 2786 is exclusively designed for DJI Ronin-S/ SC & Zhiyun Crane 2S/Crane 2/V2 & Moza Air 2/AirCorss 2 Gimbals. This handle reduces arm fatigue and provides accessory mounts when shooting with your gimbals. | 【SWEET DESIGN】The aluminum handle features a soft, ergonomic silicone design for comfort and a solid grip. It enables you to hold your gimbals with two hands to reduce the weight stress on one hand. | 【MOUNTING POINTS】This handle connects to the bottom of your gimbal via 1/4"-20 and 3/8"-16 mounting screws. Also, it features multiple 1/4"-20, ARRI 3/8"-16 threads and a cold shoe for accessory attachment, such as the original gimbal tripod, camera plate, and Monitor Mount BSE2346. | 【UNIVERSALITY FOR BOTH SIDES】The handle can be configured for right or left hand based on your needs. | 【BUILT-IN WRENCH】To ensure your gimbal is secure onto the handle, a built-in wrench is included, which stores on the bottom of the handle. Besides, the base features rubberized padding to prevent damage to your gimbal as well as to prevent twisting.

Search ASIN B087R215CF for BIG SURPRISE ! | 【HIGH CUSTOMIZATION】The cage is exclusively designed to provide protection and mounting options for Sony A6400 A6100 users especially for V-loggers, also compatible with Sony A6300/A6500. It would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot | 【PERFECT PROTECTION】Secured tightly via a 1/4’’ screw on the bottom and a M2.5 screw on the side to prevent the camera from twisting. Rubber pads on the bottom protect your camera body from scratching | 【MOUNTING OPTIONS】Features 1/4’’ & 3/8’’ threaded holes, and 3/8’’ locating holes for ARRI standard, allowing you to attach more accessories, such as cold shoe 2044. The thread holes on the bottom of the cage enables you to attach the cage to tripod. Optional Cable Clamp 1693 is provided and allows protecting the HDMI cable | 【BUILT-IN FLAT SCREW DRIVER】There is a flat screw driver absorbed on the bottom of the cage, which enables you to tighten and loosen the screws quickly | 【RELATED PRODUCTS】Optional Cold Shoe 2044; Optional Cable Clamp 1693; Optional Wooden Handle 2318

【UNIVERSAL USAGE】This SMALLRIG Baseplate 1674 is a simple and light base plate for the most popular cameras, such as Sony a6500 a6600 a6300 a6400 a6000, Sony A7 series, etc. It attaches to a camera with a 3/8" or 1/4" screw. | 【15mm LWS ROD SYSTEM】The base plate features 15mm diameter and 60mm spaced rod clamps that allows you to mount two 15mm rods, then lens support or other accessories. | 【RUBBER CUSHIONS】There are rubber cushions on the base plate, which increases friction for camera to prevent the twisting. Also, the rubber cushions can protect the camera be scratched. | 【MOUNTING POINTS】 It provides 1/4'' and 3/8'' holes on the bottom for quick mounting a cage onto a tripod or any other plates. | 【MATERIAL】 Made of solid aluminium alloy, is very solid and sturdy

Multiple Mounting Points: Built-in NATO rail on the top, one cold shoe mount, and multiple 1/4"-20 and 3/8"-16 threaded holes, this formfitting aluminum cage features several ARRI-style mounts for preventing accessories from twisting when mounted on the cage. | Anti-twist Design: Built-in two anti-twist pins on the base plate in addition to the 1/4"-20 camera mounting screw so that you could use it safely and securely | Accessory Products: Optional Top Handle 1984 or HTN2439, Wooden Side Handle 2093，Locating Handle 2165B for hand-held shooting, and Cable Clamp 2981 to protect the HDMI and USB-C cables. | Strap Holes: Both sides have strap holes, you could add a separately available hand strap PAC2456, PSW2398, or neck strap PSC2428 to your rig. | Convenient to Use: Screwdriver is built into the bottom of the cage for tightening the camera screw. The cage also has an integrated Arca-style plate on the bottom for tripod mounting.

【FORMFITTING FULL CAGE】SMALLRIG ZV1 Cage 2938 is exclusively designed for Sony ZV1 Camera. As a formfitting full cage, it is designed to provide protection, accessory mounts and a comfort grip for your ZV1 camera. The camera mounts onto the cage via a front lens ring clamp that securely holds the camera. | 【BUTTON ACCESSIBLE】SmallRig cage 2938 DOES NOT block the access to your camera's functions, displays, ports, or battery when attaching a handle or tripod. You can attach the tripod to the right side of the cage to shoot vertically for TikTok. | 【COMFORTABLE SHOOTING】On the front of the cage features anti-slip silicone gel coverings to provide a comfortable handheld shooting. Optional Cable Clamp 1693 is provided and allows protecting the HDMI cable. (Note: When using the cable clamp 1693, please clamp the HDMI cable & rubber cover together.) | 【MULTIPLE MOUNTING POINTS】The cage features multiple 1/4"-20 threaded holes on top for extra Cold Shoe Mount 2044 and Mini Top Handle 2821. The bottom of the cage is not only features a shoe mount on the bottom for a light or microphone, but also features multiple 1/4"-20 threads allow the battery and card changes without unscrewing a shooting handle or a tripod. | 【SWEET DESIGN】The ZV1 cage features rubber pads on the bottom to protect your camera body and prevent scratching. Additionally, the cage provides a strap slot on each side for carrying straps. Also, an Allen wrench is included to enable you to tighten and loosen the screws quickly.

【FORMFITTING FULL CAGE】SmallRig A7S III Cage 2999 maintains access to the camera's controls and hot shoe. Made of premium aluminium alloy, the cage is a solid piece of metal that is highly resistant to oxidation and stands the test of time. | 【PERFECT PROTECTION】The cage incorporates an anti-twist design with an M2.5 screw fixed to the strap hole in addition to the 1/4"-20 camera mounting screw so your camera can't move around in the cage. SmallRig Cage 2999 also incorporates an anti-twist design with padding on the base to protect the camera from scratching. | 【MULTIPLE MOUNTING POINTS】In addition to one cold shoe mount and multiple 1/4"-20 and 3/8"-16 threaded holes, this formfitting aluminum cage features several ARRI-style mounts for preventing accessories from twisting when mounted on the cage. It also comes with a built-in NATO rail on the left of the cage. Mounting holes on the front allow mounting a separately available lens adapter 1764. | 【RECOMMENDATIONS】The cage is compatible with SmallRig universal accessory system. You can attach SmallRig Wooden Side Handle 2093 for hand-held shooting, and SmallRig Cable Clamp 3000 to protect the HDMI cable and port. ARRI-style mounts on the top and side are provided to attach SmallRig ARRI Locating Handle or SmallRig Ball Head Magic Arm. | 【SWEET DESIGN】Lightweight design with only 200g. Strap holes are included to add a separately available wrist strap or neck strap to your rig. Besides, with built-in magnetic suction design, the included Allen Wrench is ready to use without fear of loss.

It includes a 1/4’’ counter bore slot and a cold shoe. 1/4’’ counter bore slot could be mounted on the 1/4’’ threaded holes on the right side of Cage for Sony A6500 1889. | The arrowheads on the cold shoe point to anti-off direction. | The cold shoe is compatible with RODE microphone, wireless microphone and RODE SVMX microphone. | The cold shoe extends beyond the cage, thus it will not block the buttons and ports of the cage. | Material(s): Aluminum Alloy

SmallRig Cold Shoe (2pcs Pack) 2060 could be mounted on any camera accessories with 1/4" and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc. Such as cage for sony (a6500 a6300 a6500), cage for panasonic (gh5 gh4 gh3), etc. | The counter bore hole in the center is attachable to a 1/4’’ screw, but the 1/4’’ screw will not touch the hot shoe contact of accessories mounted on the cold shoe. | There comes with two secure bending bevels on the one end to prevent accidental removal | The arrowheads on the cold shoe show the direction to mount additional accessories.

SmallRig Multi-function Double Ballhead 1138 is a multifunctional double ball head with a clamp at the bottom and a 1/4" screw on the top. | It can mount monitor and LED Lights on the one end via 1/4’’ screw, and it can lock the rod on the cage via the clamp tightened by the locking knob. | It could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting. | The rod clamp fits for DJI Ronin & FREEFLY MOVI Pro & all 30mm rods and can also be adjusted with ease. | The best load < 1.5kg

【FOR MONITOR MOUNT WITH COLD SHOE】SMALLRIG Monitor Mount 2346 is designed to hold your monitor onto the top of the camera or other mounting systems via a cold shoe adapter, which achieves lightweight design without any accessories. It can be tightened by hands via the thumbscrew. The field monitor mount is compatible with 5 inch and 7 inch monitor | 【SWIVEL AND TILT】The camera monitor holder enables to swivel 360° sideways and tilt 140° with free-stop in any positions. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios | 【FIRM LOCKING】The field monitor holder connects with monitor firmly via a 1/4-20 screw on the bottom. The size of the thumbscrew head is increased so that it’s easy to install. Both thumbscrews features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don't need to worry about the monitor fall off | 【RUBBER CUSHION】This SMALLRIG camera monitor mount comes with rubber cushions on top of the holder, which can increase the friction and protects the monitor from scratching | 【HIGH QUALITY】The robust mount is CNC-Machined Aluminum and can support 5 inch and 7 inch monitor up to 1.2kg, which makes it lightweight and durable at the same time

【HIGH CUSTOMIZATION】For Zhiyun-Tech WEEBILL-S Gimbal, SmallRig BSS2636 is designed to add support and accessory mounts to WEEBILL-S handheld gimbal. This ergonomic handle allows you to shoot from a variety of angles, including high- or low-angle shots | 【FIRM LOCKING】The handgrip is equipped with a 1/4"-20 thumbscrew and two locating pins for a secure, anti-twist connection to your gimbal | 【MOUNTING POINTS】Featuring 1/4"-20, 3/8"-16, and ARRI-style accessory threads, as well as a shoe mount on one end for mounting additional accessories such as Monitor Mount BSE2346, Magic Arm 2070 etc. | 【BUILT-IN WRENCH & Rubber Pad】Moreover, this handle grip Rubber padding on the handle’s top plate protects your WEEBILL-S gimbal from scratches | 【BUILT-IN CARRY STRAP SLOT】Additionally, on the bottom of this handle is with a carry strap slot for your convenience. This ergonomic aluminum handle enables you to shoot more easily

【FOR POWER BANK】 SMALLRIG Holder BUB2336 is designed for portable power banks, it could attaches a power bank to the camera rig when a sustainable charging solution is required. | 【SPRING LOADED CLAMP】 The holder features a spring loaded clamp which enables to holds power banks with width ranging from 53mm to 87mm, which covers most products in the market. | 【RUBBER CUSHIONS】 The holder BUB2336 comes with soft rubber cushions inside, which can protect your power bank from scratching. | 【MOUNTING POINTS】 On the top, bottom and back of the holder, there are multiple 1/4” threaded holes for connect with other accessories, such as SMALLRIG Top Handle 1638, SMALLRIG Dual Rod Clamp 942, SMALLRIG Magic Arm 2070 or SMALLRIG cages. | 【LIGHTWEIGHT AND DURABLE】 The holder BUB2336 is made of aluminum alloy, is very sturdy and durable. Moreover, the net weight is only 105g, is lightweight for you to carry around.

【SIDE HANDLE FOR CAMERA CAGE】SmallRig Mini Side Handle 2916 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 1/4"-20 screws are fixed to the side of your camera cage. SmallRig 2916 Any cage featuring two 1/4"-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2999, 2493, 2087 etc. | 【FOR RIGHT-HAND/LEFT-HAND USE】Highly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning. | 【ERGONOMIC DESIGN】Made of aluminum alloy and plastic（PC+ABS） with ergonomic design, the portable handle provides filmmakers with a smooth and comfortable shooting experience. | 【MOUNTING OPTIONS】SmallRig handle 2916 supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off. | 【LIGHTWEIGHT & PORTABLE】It weighs only 139g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. ( Note: The maximum bearing capacity of the handle is 3.5kg. Please do not overload. )

【NEW VERSION】This is the NEW VERSION 2245B but can still work with the OLD VERSION SmallRig cage 2203, CVB2254 and CVB2255. Please bolt it to the suggested place as shown in the picture using two 1/4”-20 screws, which won’t interfere with other accessories attached | 【HIGH CUSTOMIZATION】The SSD mount can help you stabilize the Samsung T5 SSD when you use the BMPCC 4K & 6K camera equipped with SMALLRIG BMPCC 4K & 6K cage | 【INSTALLATION】It attaches to the camera rigs using two included 1/4”-20 screws, which can flexibly position on cage or handles. It secures both the T5 SSD and the connected USB-C cable by locking levers | 【COMPATIBILITY】Compatible with SmallRig BMPCC 4K & 6K Cage 2203/2255/2254 (Both the new version and the old version) | 【HIGH QUALITY】SmallRig 2245B is made by aluminum alloy, sturdy and durable. Also, it weighs only 58g

【FOR CAMERA ACCESSORIES】SMALLRIG Screw Set for Camera Accessories AAK2326 is designed for camera cages, handles, plates and other camera related accessories | 【26 SCREWS IN TOTAL】The box includes six types of screw, 26 screws in total | 【SOCKET CAP & SLOTTED & PHILLIPS SCREW】26 screws in total: 2 x 1/4” slotted screw, 8 x 1/4” socket cap screw, 2 x 3/8” slotted screw, 4 x M2 phillips screw, 2 x M2.5 socket cap screw, 4 x M3 phillips screw, 4 x M4 socket cap screw and a box for storage | 【SIX TYPES OF SCREWS】The box includes six types of screw: 1/4”, 3/8”, M2, M2.5, M3, M4 Screws | 【EXAMPLES OF USE】The m2.5 screw can be used for selected camera cage which locked with m2.5 screw on the side. The m3 and m4 screw can be used for ARRI rosette, etc

This Super CoolClamp mount with 1/4" screw, made of lightweight Aluminum Alloy. Comes with a clamp at the bottom and a 1/4" screw on the top. | Mounts onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. | Cool Clamp can MAX open 40mm, and minimum 15mm rods; It could attach and detach from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting. | Comes with 1/4"-20 Camera Hot Shoe Mount w/ a Swivel Ball-Head,360-degree articulation, for cameras such as for Canon, for Nikon, for Olympus, for Pentax, for Panasonic, for Fujifilm & for Kodak. You can take off the articulating arm part and change it to a cold shoe clamp mount! | Comes with 1/4"-20 and 3/8"-16 thread, can be mounted virtually anywhere. The best load<3kg.

【VERSATILITY】The super clamp is designed to mount onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It's up to your imagination & inventive ideas. | 【ADJUSTABLE JAW】The jaw opens to max about 1.57" (40mm), and minimum 15mm. You can clip it on anything less than 40mm thick and more than 15mm. | 【FOR MORE ACCESSORIES】The clamp features 1/4’’ threaded holes and 3/8 threaded hole, which allow you to attach more accessories, such as ballhead 1135, magic arm 2070. | 【High-Quality】Made of aluminum alloy and stainless steel, sturdy and durable. | 【BETTER PROTECETION】The updated rubber pads on the clamp parts prevent your application from slipping and scratching.

【NATO RAIL STANDARD】SMALLRIG BUN2483 is compatible with standard NATO accessories for quick release, such as clamps, handles and monitor holders, enabling you to quick attach and release the rig components | 【THIN & LIGHTWEIGHT】The thickness of SMALLRIG 2483 is 6mm, and the length of it is 70mm. Weighs only 17g, it is made by Aluminum Alloy, very sturdy and lightweight, easy for storage | 【ANTI-OFF DESIGN】SMALLRIG The safety pins on both side prevents your NATO accessories from accidentally sliding off | 【MOUNTING OPTIONS】It can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws (included) to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc | 【RECOMMENDATION】It works with items with NATO clamp, such as SmallRig NATO Clamp 1973, SmallRig Monitor Mount with NATO clamp 2100 and BSE2347, SmallRig Rotating Nato Handle HTN2362, for quick attachment and release

SmallRig UUniversal Compatibility: The shoulder strap includes an o-ring and leather pad, which compatible with various camera shoulder strap loops. Suitable for all brand mirrorless cameras and DSLR.niversal Braided Shoulder Strap (Black) 4882 | "Premium Material: Made of high strength nylon climbing rope and genuine leather, the joints are hand stitched with premier genuine leather, offering the strap style and durability. This strap features an integrated shoulder pad that protects the neck from chafing. It can be comfortably worn around the shoulder or neck. Note: the surface layer of the shoulder strap is genuine leather, and it is normal to have natural color difference. | Easy Installation: Simply thread the leather strap through the camera shoulder strap loop to use. The shoulder strap supports can be threaded through the lug mount and rivet, allowing for vertical camera hanging when used with an L-shaped grip. | Length: The nylon braided cord strap has a length of 110 cm /43.3 in and a width of 2.2 cm /0.87 in. Its length caters to the needs of a wide range of camera users. | Lightweight and Portable: Weighing just 53g/1.87 oz, this camera shoulder strap minimizes strain and discomfort on your neck or shoulder. With a static load capacity of 10 kg/22 lb, it combines durability with a vintage style

Universal Compatibility: The shoulder strap includes an o-ring and leather pad, which compatible with various camera shoulder strap loops. Suitable for all brand mirrorless cameras and DSLR. | "Premium Material: Made of high strength nylon climbing rope and genuine leather, the joints are hand stitched with premier genuine leather, offering the strap style and durability. This strap features an integrated shoulder pad that protects the neck from chafing. It can be comfortably worn around the shoulder or neck. Note: the surface layer of the shoulder strap is genuine leather, and it is normal to have natural color difference. | Easy Installation: Simply thread the leather strap through the camera shoulder strap loop to use. The shoulder strap supports can be threaded through the lug mount and rivet, allowing for vertical camera hanging when used with an L-shaped grip. | Length: The nylon braided cord strap has a length of 110 cm /43.3 in and a width of 2.2 cm /0.87 in. Its length caters to the needs of a wide range of camera users. | Lightweight and Portable: Weighing just 53g/1.87 oz, this camera shoulder strap minimizes strain and discomfort on your neck or shoulder. With a static load capacity of 10 kg/22 lb, it combines durability with a vintage style

Universal Compatibility: The shoulder strap includes an o-ring and leather pad, which compatible with various camera shoulder strap loops. Suitable for all brand mirrorless cameras and DSLR. | "Premium Material: Made of high strength nylon climbing rope and genuine leather, the joints are hand stitched with premier genuine leather, offering the strap style and durability. This strap features an integrated shoulder pad that protects the neck from chafing. It can be comfortably worn around the shoulder or neck. Note: the surface layer of the shoulder strap is genuine leather, and it is normal to have natural color difference. | Easy Installation: Simply thread the leather strap through the camera shoulder strap loop to use. The shoulder strap supports can be threaded through the lug mount and rivet, allowing for vertical camera hanging when used with an L-shaped grip. | Length: The nylon braided cord strap has a length of 110 cm /43.3 in and a width of 2.2 cm /0.87 in. Its length caters to the needs of a wide range of camera users. | Lightweight and Portable: Weighing just 53g/1.87 oz, this camera shoulder strap minimizes strain and discomfort on your neck or shoulder. With a static load capacity of 10 kg/22 lb, it combines durability with a vintage style

Universal Compatibility: Designed for all brand mirrorless cameras and DSLR. It is installed by threading the rope directly through the camera shoulder strap loop, suited for most camera strap holes. | Premium Material: Made of extremely durable nylon material with a braided design, this wrist strap is durable with a long service time. Note: Only the surface layer of the wrist strap is genuine leather, and it is normal to have natural color difference. In the Box: Wrist Strap x 1 | Improve Camera Security:Attach the strap to your camera, loop it around your wrist, and adjust the length. When shooting with a handheld camera, this will help prevent the camera from accidentally falling off. | Support Elastic Adjustment: The total length of the camera strap wrist is 41cm/16.1in. The aluminum alloy metal ring allows for flexible adjustment of tightness to fit different wrist sizes | Lightweight and Portable: Weighing only 34.1g/1.2 oz, the camera hand strap adds minimal burden and discomfort to your hand. Its compact size allows for convenient storage in any pocket. It supports a static load of 10kg / 22lb, making it both comfortable and portable.

Universal Compatibility: Designed for all brand mirrorless cameras and DSLR. It is installed by threading the rope directly through the camera shoulder strap loop, suited for most camera strap holes. | Premium Material: Made of extremely durable nylon material with a braided design, this wrist strap is durable with a long service time. Note: Only the surface layer of the wrist strap is genuine leather, and it is normal to have natural color difference. In the Box: Wrist Strap x 1 | Improve Camera Security:Attach the strap to your camera, loop it around your wrist, and adjust the length. When shooting with a handheld camera, this will help prevent the camera from accidentally falling off. | Support Elastic Adjustment: The total length of the camera strap wrist is 41cm/16.1in. The aluminum alloy metal ring allows for flexible adjustment of tightness to fit different wrist sizes | Lightweight and Portable: Weighing only 34.1g/1.2 oz, the camera hand strap adds minimal burden and discomfort to your hand. Its compact size allows for convenient storage in any pocket. It supports a static load of 10kg / 22lb, making it both comfortable and portable.

Universal Compatibility: Designed for all brand mirrorless cameras and DSLR. It is installed by threading the rope directly through the camera shoulder strap loop, suited for most camera strap holes. | Premium Material: Made of extremely durable nylon material with a braided design, this wrist strap is durable with a long service time.Note: Only the surface layer of the wrist strap is genuine leather, and it is normal to have natural color difference. In the Box: Wrist Strap x 1 | Improve Camera Security:Attach the strap to your camera, loop it around your wrist, and adjust the length. When shooting with a handheld camera, this will help prevent the camera from accidentally falling off. | Support Elastic Adjustment: The total length of the camera strap wrist is 41cm/16.1in. The aluminum alloy metal ring allows for flexible adjustment of tightness to fit different wrist sizes | Lightweight and Portable: Weighing only 34.1g/1.2 oz, the camera hand strap adds minimal burden and discomfort to your hand. Its compact size allows for convenient storage in any pocket. It supports a static load of 10kg / 22lb, making it both comfortable and portable.

Portable and Lightweight: Mini Mount 3577 is designed to hold your light onto the top of the camera, Cage or other mounting systems via a cold shoe adapter. Portable and Lightweight mini shoe holder, Weighing only 20g. If you don't want to put too much weight on the camera, this is a good choice. | Flexible Positioning: The aluminium mount enables you to tilt up to 138° to position your light and realize precise lighting.NOTE: Mini mount support device up to 250g. | Anti-scratch: Made of high-quality aluminium alloy material, the surface adopts anti-oxidation treatment, more stable and durable. Features an Anti-scratch pad on the top to protect the device from scratch. | Wide Compatibility: With a 1/4" screw on the top for light or microphone. With cold shoe adapter on the base for more accessories attachment if needed. Such as ID: 3290, 3157, 3561, 3611 and so on. | Toolless installation: Come with a cold shoe adapter on the base, you can quickly attach the mount to the camera or cage.

Anti-Twist Design: The magic arm comes with a 1/4"-20 Screw and a 3/8"-16 Screw for ARRI. It features anti-twist pins and silicone pads on both ends to securely hold equipment with female pin ports in place. This design allows you to work without worry. Suitable for photography, video shoots, studios, etc. | Enhanced Load Capacity: The ball head's surface features a spiral pattern that enhances friction for a load capacity of up to 3kg. The head can be adjusted 360 degrees to meet your needs while remaining flexible and unobstructed. For monitors, lights, microphones, etc. | Smooth Adjustment: Stainless steel gear joints are equipped with springs for smoother angle adjustment. Anti-breakage design hand screw knob with built-in thrust bearing, smooth and comfortable hand feeling, ergonomic, can lock the magic arm and ball head with one key. It comes with a hex spanner for further tightening. | Premium Construction: Overall streamlined appearance, made of aircraft grade aluminum alloy and stainless steel, integral CNC machining, sturdy and durable. Can be mounted on a tripod, cage, etc. | Note: Includes a 11" Rosette Magic Arm 4900. Any inquiries will be responded to within 24 hours. Please feel confident in using them.

Quick Release Structure - This magic arm features an exclusive quick-release slider slot structure. Installation is accomplished by pressing a single button and then smoothly sliding the slide into the groove, ensuring stability and safety and enhancing the efficiency of disassembly and assembly. | Anti-Twist Design - The top plate is equipped with 1/4"-20 screws and locating pins, allowing external connection to monitors, LED lights, and SmallRig action camera cages such as 4119B and 4088B. This setup effectively prevents equipment deflection, ensuring shooting safety. | 3kg Load Capacity - The ball head's surface features a spiral pattern that enhances friction for a load capacity of up to 3kg. And the head can be adjusted 360 degrees to meet your needs while remaining flexible. | Smooth Adjustment - The stainless steel gear joints feature springs to facilitate smoother angle adjustments. The hand screw knob is designed with an anti-breakage feature and includes a built-in thrust bearing, offering a smooth and comfortable grip. This ergonomic design allows for one-touch locking of the magic arm and ball head. | Premium Construction - The SmallRig magic arm 4489 is made of aircraft-grade aluminum alloy and stainless steel, utilizing integral CNC machining for exceptional sturdiness and durability.

【Length】Length of 12 inches / 30cm | 【Diameter】The diameter of the rods is industrial 15mm standard | 【Inner Thread】M12 inner thread on each end of a rod, so that you can use M12 rod end cap (SmallRig 1617) to prevent your accessories sliding from rods | 【Compatibility】Mainly used on camera riser system and filmmaking accessories, such as matte box, follow focus, lens support, etc. | 【High Quality】Made of 601 aluminum alloy, well finished and precise CNC processing, sturdy and durable

SMALLRIG 15mm Carbon Fiber Rod (4" , pair) 1871 is a pair of 4 inch long non-threaded rods featuring a carbon fiber pattern on the outer surface, which is highly rigid, lightweight and corrosion resistant | This pair of rods are 100mm long machined from hollow carbon fiber tubes | It is precision crafted for 15mm support systems, you can attach a wide variety of available accessories, such as follow focus, matteboxes and much more | If you need much longer carbon fiber rods, please click 15mm Carbon Fiber Rod - 20cm 8inch (2pcs) 870, 15mm Carbon Fiber Rod - 30cm 12inch (2pcs) 851 | Made of carbon fiber, sturdy and durable. Please note that the carbon fiber rods do not feature female thread

High Performance: The 15mm carbon fiber rod has good heat resistance, corrosion, rubbing performance | Smooth Coating: The smooth surface makes your installation more conveniently and comfortably | Lightweight: Weighs only 40g, lighter than traditional stainless-steel rods | Length: 8 inches (20cm) long. If you need a longer rod, SmallRig rods 851 (30cm, 12 inches) will be recommended | Made of carbon fiber, sturdy and durable. Please note that the carbon fiber rods do not feature female thread

15mm rod carbon fiber 1690 fits for those rigs with 15mm rail block clamp to connect them together with your camera | SmallRig 1690 can be attached to a wide variety of available accessories, such as follow focus, matte boxes, also 15 mm shoulder pad, etc. | Made of lightweight carbon fiber. Rigid, durable and lightweight rods | Highly rigid, lightweight and corrosion resistant | 2 rods are included in the package, 9 inch in length

This Lens support system is perfect for long lenses and is compatible with any industry-standard 15mm rod system, help to create a more stable, vibration-free platform for shooting. | The Y shaped long lens support screws onto the 15mm rod clamp to the long telephone lens while shooting. | There are two rubber washers to protect the finish off of your lens from wearing. Gloove/Slot design, allow to use Velcro to fasten your big lens. | Wildely compatible with different lens. The diameter range of lens support: 50mm to 140mm ; Adjustable in height. | NOTE: Dual Rod Clamps Please Search "SmallRig 1761" OR SmallRig 1783 OR SmallRig 1784.

【2 PAIR 15MM RODS】SmallRig M12 Thread 15mm Rods set 1659 includes 2pcs M12-20cm rods, 2pcs M12-30cm rods and 2pcs rod connectors. | 【WIDE COMPATIBILITY】Designed for a wide variety of DSLR and HD video camera accessories such as handlebars, shoulder mount, follow focus and matte boxes, etc. | 【HIGH-QUALITY MATERIAL】Made of durable anodized black aluminum, CNC machinery structure, durable and stable to use when shooting. It is the best choice for a shoulder support system. | 【GREAT COMBINATION】The M12-20cm rod could attach to an M12-30cm rod via a rod connector for the shooting. This combination extends more possibilities and versatilities. | 【SPECIFICATIONS】Material: Aluminum. Diameter: 15mm. Length: 20cm (8")/30cm (12"). Weight: 55g(8")/85g (12"). | 【RELATED PRODUCTS】 If you need a higher carrying capacity rod, we have Stainless Steel Rod 3684, 3682, and 3683 as a recommendation.